@@hammerandhome What kind of renovations do you do? We operate in NW Calgary and do primarily kitchen, bathrooms and decks, but don't limit ourselves to those. Northern Lights Renovations.
Excellent video; your director did a top job and was very helpful. I have that laser measurer, and it's very accurate. BOSCH makes terrific devices, especially for DIYers. A few points. The GLM 50c should be calibrated before use. Works best if placed on a level and hard surface. I'm 74 and have a shaky hand which interferes when I hold it in my hand. I usually mount it on a camera tripod stand, so it doesn't move when I use it. Another advantage is that you don't need a helper to hold the end of a tape measure when you use it.
Hi How are you? I really enjoyed the video explaining all the possibilities of the BOSCH GLM 50 C laser meter. I have many friends who don't understand English at all, and I want to ask you, do you agree that I will take this movie you shot, and make a new audio track for it in another language, so I can send it to my friends who will understand the operating instructions? It will really make me and them happy I would appreciate your reply as soon as possible Thank you!!
can you do a sample of a built in shelving? I just bought this and I want to use it to build a built-in entertainment center with a electric fireplace insert near floor and then TV nook above that and shelves on sides and above TV
Hi, how do you set the accuracy level for this device? It gives me 1/32" or even 1/64" of an inch accuracy and I want 1/8" or 1/4" accuracy. It's frustrating as hell getting these super precise numbers. I mean 6'-4 21/32" what is that! 🙂Thanks.
Hi, Thanks for doing this video. I've set the GLM50C's display such that it shows only inches instead of feet and inches. When I transfer the measurement to a drawing, it always converts to feet and inches. Is there a way to tell the app not to do the conversion but transfer it as-is? It's causing human manual calculation errors when my workers are converting them back to all inches -- sorry, but some workers are just not good in math :-( Thank you.
No you can’t. However I just got the new one and it can. It also does a lot more than this model. I’ll be putting up a video soon. Or you can see a small video of it on Amazon.com that i did
Hi, Does the app know the exact measurements of A to B just by clicking on it? You don't actually have to physically take the rhe measurements yourself?
Hi! I just purchased it and watched this video over and over, but I could not get the correct measurements in the picture like the ones illustrated here. I really think I'm missing something in the process. I downloaded the app (Bosch measureon) and activated the bluetooth etc. I tried taking a picture and measured manually the initial dimension and it was fine, however, when I tried getting the other measurement of the succeeding arrows, the values I got were all wrong. Could you please help me out...I'd really appreciate it... thank you!
ill try, not sure if this applies to what you were doing, but depending on when your measuring you have to select the inside or outside of the wall. for the option where you take a pic and add the arrows and apply the measurements, it should be pretty straight forward. take the pic, add the arrow, select the arrow, it will turn yellow, then take the measurement and it should apply it to the pic. I hope that helps. let me know if you need more help.
When you make floorplans for a living then this is not fast enough. You need to know where the windows and doors are, but to have to take a picture for putting in measurements, that's just too much. All i need is a floorplan and some scetches of walls to see where's what. This app is not for me but maybe for a hobbyist or 1 time project.
I think it's great when working with clients, or sub trades that need to see a space, we can take a pic, add measurements and it seems to help people who can't visualize things. I agree for me and others I like a set of drawing from the architect over this any day.
Hello from Calgary from a fellow renovator. Thanks for the helpful info. I just received my GLM 50 C and it looks pretty good so far.
Hey Bruce, thanks for watching, it’s definitely a sweet little laser! I think you’ll enjoy it 👍
@@hammerandhome What kind of renovations do you do? We operate in NW Calgary and do primarily kitchen, bathrooms and decks, but don't limit ourselves to those. Northern Lights Renovations.
no wonder Home Depot has no product on the shelves, you have all their inventory
Excellent video; your director did a top job and was very helpful. I have that laser measurer, and it's very accurate. BOSCH makes terrific devices, especially for DIYers. A few points. The GLM 50c should be calibrated before use. Works best if placed on a level and hard surface. I'm 74 and have a shaky hand which interferes when I hold it in my hand. I usually mount it on a camera tripod stand, so it doesn't move when I use it. Another advantage is that you don't need a helper to hold the end of a tape measure when you use it.
Great points, I'll look into the calibration, have never done it myself! Thanks for watching and you're right, Tiffany is a great director!
could you do a video on indirect length measurement looking to use is to square footings
when i play this at 2x speed your voice still sounds normal lol
Hi guys
How do you use the outdoor function when can't see the lazer dot.
Also does it have a material deduction function
Hi
How are you?
I really enjoyed the video explaining all the possibilities of the BOSCH GLM 50 C laser meter.
I have many friends who don't understand English at all, and I want to ask you, do you agree that I will take this movie you shot, and make a new audio track for it in another language, so I can send it to my friends who will understand the operating instructions?
It will really make me and them happy
I would appreciate your reply as soon as possible
Thank you!!
Sorry all our content is copyrighted. We do not approve of our content being used unless we give permission
But thank you for watching.
@@hammerandhome OK
thanks anyway
And much success in the future
can you do a sample of a built in shelving? I just bought this and I want to use it to build a built-in entertainment center with a electric fireplace insert near floor and then TV nook above that and shelves on sides and above TV
Hi, how do you set the accuracy level for this device? It gives me 1/32" or even 1/64" of an inch accuracy and I want 1/8" or 1/4" accuracy. It's frustrating as hell getting these super precise numbers. I mean 6'-4 21/32" what is that! 🙂Thanks.
I'm wondering if it's worth using the angle function to set my table saw blade. Anyone tried that?
I wonder what brand of cordless tools he uses
lol, all of them :)
Hi, Thanks for doing this video. I've set the GLM50C's display such that it shows only inches instead of feet and inches. When I transfer the measurement to a drawing, it always converts to feet and inches. Is there a way to tell the app not to do the conversion but transfer it as-is? It's causing human manual calculation errors when my workers are converting them back to all inches -- sorry, but some workers are just not good in math :-( Thank you.
Can you set the fractional readout at 1/8” increments?
No you can’t. However I just got the new one and it can. It also does a lot more than this model. I’ll be putting up a video soon. Or you can see a small video of it on Amazon.com that i did
Great video! Do you have a video on how to measure curved walls?
I don’t, you could wrap a tape around it or a string line than measure the string
@@hammerandhome thank you! I will try that.
Does it measure from the to as well as the bottom of the unit?
yes, you can select different point on the side of the laser to measure from in the menu
i just bought Bosch GLM 50C , is there a way to switch the fraction from 1/32" to 1/8" for each measurement ?
1/32 becomes complicated , thanks
I wish, im not aware of any option to do that. i usually just adjust it to make it easier
Thanks guys you're great!
Name of the APP please
I just bought this Bosch GLM 50 CX Professional
Paid All In 122.00$CDN
nice!
Hi,
Does the app know the exact measurements of A to B just by clicking on it? You don't actually have to physically take the rhe measurements yourself?
He had to, he just didn't bother to explain it.
Hi! I just purchased it and watched this video over and over, but I could not get the correct measurements in the picture like the ones illustrated here. I really think I'm missing something in the process. I downloaded the app (Bosch measureon) and activated the bluetooth etc. I tried taking a picture and measured manually the initial dimension and it was fine, however, when I tried getting the other measurement of the succeeding arrows, the values I got were all wrong. Could you please help me out...I'd really appreciate it... thank you!
ill try, not sure if this applies to what you were doing, but depending on when your measuring you have to select the inside or outside of the wall. for the option where you take a pic and add the arrows and apply the measurements, it should be pretty straight forward. take the pic, add the arrow, select the arrow, it will turn yellow, then take the measurement and it should apply it to the pic. I hope that helps. let me know if you need more help.
👍thanks for your tutorial
You're welcome 😊
Im trying to turn it off
I click the off red arrow button and the laser goes off but not the display
neverminded got it!!
sweet
Brad:
Am I the only one here wondering how the “DEWALT” guy winds up with the Bosch product presentation?
Wasupwitdat?
I think your awesome bro your are dead on you know what your doing 😉thanks for sharing with us bro
You’re welcome, thanks for watching!
Check out our full playlist of Cool Laser Stuff: th-cam.com/play/PLdLHTvhRGVxb_0phtkl3yf4BRm9OINt95.html
Apple iPad Air 4th Gen has this feature and pre installed already.
cool!
i gave up after watching for 10 minutes and nothing relevant had been talked about.
Why is it so damn hard to find good information about this thing 😂
You should be doing the ads for Bosch
The Bosch ads are pathetic compared
lol thanks bud!
ممتاز جدا شكرا جزيلا
Please tell the camera person to not comment.
Why?
And 'how to use' video where he doesn't even turn on the thing... Wow
Might be a a decent video if you did not have all that talking in the background
😆🍻🍺😊
When you make floorplans for a living then this is not fast enough. You need to know where the windows and doors are, but to have to take a picture for putting in measurements, that's just too much. All i need is a floorplan and some scetches of walls to see where's what. This app is not for me but maybe for a hobbyist or 1 time project.
I think it's great when working with clients, or sub trades that need to see a space, we can take a pic, add measurements and it seems to help people who can't visualize things. I agree for me and others I like a set of drawing from the architect over this any day.