In the b777 there will be no speed restrictions without an alt restrictions, you need to add both restrictions in the fmc when there's only a speed restrictions on the side or star ex: 220 at globo on the charts... in the fmc on globo you'll have to add 220/3500A or something like that😉
Even in the real Boeing 777. Speed constraints that are not also attached to a waypoint will NOT show up in the FMC. It's very important to brief the departure before you fly it! You had the 205 knot restriction at PORPA. (26:01) But the 220 knot restriction BETWEEN(very important)PORPA and TD will not show in the FMC and you oversped as soon as you retracted the flaps. To fix this, you would need to enter in a speed restriction at TD manually, of /220. So you don't over speed next time you fly this departure. Good Luck!
Thanks mate, I appreciate the explanation. It is so strange that the 777 don't show those constraints by default when loading the daparture. But I guess I need to get used to double checking it manually.
Hello, I’m having a bit of a crisis! I really want the 77W however i don’t know if i should and buy msfs 24 or buy the 777 now. Does anyone who has it think it worth it or should i wait. Thanks Oliver F
Did you know that the annoying double arrow mouse is caused by GSX (the window is still there but it is invisible) so you need to untick GSX in the toolbar. My life is so much easier since I know that 😅
You can use the bulk door in gsx by opening the gsx airplane customization menu (spawn in first) then go to cargo main door dropdown and set an angle (i use 0.75) then open the custom menu at the bottom and move the lines to the spot you want it. Hope this helps!
It's just the standard one. But there are some on flightsim.to. Or you mean for the airport? Either through flightsim.to or through the inbuilds installer
![[MSFS] PMDG 777-300ER American Airlines | London to New York | VATSIM Full flight | 4K Ultra HD](http://i.ytimg.com/vi/xIrhS9HxPSY/mqdefault.jpg)
![[MSFS] PMDG 777-300ER American Airlines | London to New York | VATSIM Full flight | 4K Ultra HD](/img/tr.png)
![[4K] Cathay Pacific B777-300er Engine Start and Takeoff in Hong Kong](http://i.ytimg.com/vi/Z-4mq_yv9DQ/mqdefault.jpg)
![WINDY NEW ZEALAND [RTX 4090]: Air New Zealand NZ 600: Queenstown ✈ Wellington in MSFS 2020](http://i.ytimg.com/vi/uJ3JgIPPD98/mqdefault.jpg)
![[P3D v5.4] PMDG 747-8F Cathay Pacific Cargo| Hong Kong to Anchorage | Full Flight](/img/n.gif)
In the b777 there will be no speed restrictions without an alt restrictions, you need to add both restrictions in the fmc when there's only a speed restrictions on the side or star ex: 220 at globo on the charts... in the fmc on globo you'll have to add 220/3500A or something like that😉
Love some good HK ops, great video as usual
220/5000A at TD and ATC initial altitude clearance is 5000ft.
I recommend a mod called no handle bar on flights I’m.to to get rid of that white bar when moving the mouse 👍
love your content
Thanks mate
Where are you flying from and going to
wonderful video tj
Even in the real Boeing 777. Speed constraints that are not also attached to a waypoint will NOT show up in the FMC. It's very important to brief the departure before you fly it! You had the 205 knot restriction at PORPA. (26:01) But the 220 knot restriction BETWEEN(very important)PORPA and TD will not show in the FMC and you oversped as soon as you retracted the flaps. To fix this, you would need to enter in a speed restriction at TD manually, of /220. So you don't over speed next time you fly this departure. Good Luck!
Thanks mate, I appreciate the explanation. It is so strange that the 777 don't show those constraints by default when loading the daparture. But I guess I need to get used to double checking it manually.
@@tjpilot5913safe travels have a great flight in joy your day
Hi, my MSFS looks rubbish compared to yours, do you have any idea why?
On final, was it 27 fps with or without frame gen?
Safe travels
Thanks mate
Can I see the whole flight route?
Hello, I’m having a bit of a crisis! I really want the 77W however i don’t know if i should and buy msfs 24 or buy the 777 now. Does anyone who has it think it worth it or should i wait. Thanks
Oliver F
Well I think the aircraft is the same in MSFS24. So really depends on how soon you want to fly it.
Did you know that the annoying double arrow mouse is caused by GSX (the window is still there but it is invisible) so you need to untick GSX in the toolbar. My life is so much easier since I know that 😅
How do you get bulk cargo loading in gsx? Is there a profile for it? The default one only have ULD loaders.
You can use the bulk door in gsx by opening the gsx airplane customization menu (spawn in first) then go to cargo main door dropdown and set an angle (i use 0.75) then open the custom menu at the bottom and move the lines to the spot you want it. Hope this helps!
where did you get the gsx profile from?
It's just the standard one. But there are some on flightsim.to. Or you mean for the airport? Either through flightsim.to or through the inbuilds installer
Do you use any sort of frame gen. Eg lossless scaling or dlss
He said about 3/5 mins in he uses frame gen sir
@@oliverfoden sorry boss I don’t have too much time on my hands
Yeah I use lossless scaling now.
@@tjpilot5913 thanks man
@@SamBolt09 ah no worries sir have a good day
How do you have VDGS at VHHH?
GSX config found on flightsim.to
great video! do u prefer p3d or msfs?
There are window plugs for liveries on P3D. Hope we will have window plugs in MSFS to match real world windows configurations
Thanks mate. I prefer MSFS as a sim, but I the aircraft add ons are most important. So for 747 flying I use P3D still
Still 55% for stabilizing :)
Haha, will I ever remember?
Despite the beauty textures This sim still sucks !
how?
i have some issues with this plane. when i land my rudder always inputs when moving my yoke. and it seems very twitchy.
That's strange. it feels rather stable for me. Maybe check that you don't have the rudder assigned to an axis on your yoke
Which yoke are you using?