@@Gizmo85 I don't know if by now you figured it out since it's a 1 year old reply, but here's a guess: you know how he built it like a cross? im guessing you extend it maybe and then you just do the rest? idk
Thank you so much! I've been trying to figure this out on my own but never knew that blueprinting it popped the floors inside of it! Definitely using this for my build this week, and I'll be sure to point out where I got the method from!
Thank you so much for this video. I’ve been looking for something like this. I found a really cool camp location and have been trying to find a way to build a round type structure around it and this is perfect.
I don't see how it could tbh. The angles roof tiles need at lease two walls (one higher, one mid height) to connect to. How did you do this @Jackomara?
Awesome but please show how to have floors on 2nd level instead of rooves and also how then to maybe have stairs or a nice tidy way to get up and down into 2nd story - using the smallest foundation possible... I like the octagon one! Thanks
TLDR: IT STILL WORKS! not patched or anything ayt, so its 2022, I just got fallout76 (3-ish) months ago and Im enjoying it so far as building was one of the most relaxing thing to do in fallout. The key to achieving the circular thing was to make sure each foundation (when rotating) is to intersect it with one another (not too obvious but to y'know.. its 'conjoined' in a way when you try to highlight-hover each foundation) build your walls by staying inside not outside while also using the individual foundation for each sides (2:13) , the glitch will do the rest, it took me alot of tries and so far this video is super simple and easy to understand (great video!) , just be patient :) ! Happy building, Vault Dwellers.
it is possible to save the ground, 1st floor with roofs and up to the third floor with roofs in one blueprint. three levels with every level roofs is to much for one blueprint. turned into glas and a tree in the middle or two with special lights to set up looks really awsesome. it is also possible to save a middle level only the walls as a blueprint to extend faster, but only walls and a roof wont work sadly😁 thank u so much for this vid👍
This is amazing! Thank you sooooo much! I was getting so bored of plain old square buildings. A question tho; when I lay down my blueprint, only one wall snaps to the inside. Is there a trick to getting them all to do it?
@@TheHam8919 It's essentially the same trick you used to get the floor to merge inside the walls; just use square roof tiles. So place on on the inside of one wall, then place the other on the outside of the same wall. Then remove the inside one and repeat all the way around. In the end, remove the single inside roof tile and then save your blueprint, wreck everything, and then replace the BP. The floors and ceiling tiles on the outside should snap inside! Easy peasy! I'm still trying to figure out using the angle roof tiles though. It would be fab if I could figure it out.
Why thank you very much dear sir! I saw the thumbnail and was thinking to myself; probably another flamethrower video, and i can't be arsed the extra effort it takes to break something, rebuild it, yada yada yada But this... i will try out ASAP! :D ~CGTv
So how can you make this multi-level? And can we get a tutorial on the big version you show please? I can see where the big version could be made multi level somewhat easily.
@@HerrFixiHartman Okay, maybe this is a newblet question, but how do you flame the roof. My weapon flame thrower does no damage. Do you mean the flame thrower trap?
How do you make the large circular structure? I can do the small one but I can't figure out how to make the large one due to the gaps as you extend the outer section where you place the walls
Ugh right? It seems like every survival game I've played only allows and offers square tiles. Blech. Give us tower pieces and more round building sets!
If you keep the center rock(s) and blueprint it, it should snap together with a full floor. did it last night. Roofing this Mofo is another deal tho.. man..build, burn repair repeat.
All the way up in Nuka world on tour I'm using this video I'm gonna use a scaled down version of this method to build flyns arcade from tron with all my cool new arcade games and decor
Hi all, mine keep clipping frantically once they all merge? Does anyone else have this issue?! If anyone could build a 2, 3 story ones of this building I’ll sort you with some stuff???
Awsome!! Thanks for the video!🥳🇧🇻im New in this game and this game is Awsome if they Only make NEW Boss Mutant only 2 Beast boss Mutant there!!come on Microsoft!!!!!!this game can be Nr 1coop online.
So let me get this correct, you are more or less fooling the server into believing that the foundations should be inside the circle. Brilliant! It does amuse me that Bethesda building code can be used against them...ahahahahahaha.
@@J.erem.y So now you have to explain the intricacies of the code(which he doesn't have access too) to make a good tutorial? I was able to follow it with ease... and if you read the comment section has answered most of your questions. I disliked your comment because you're entitled and rude.
Thank goodness for a tutorial that is simple, clear, and without inane chatter! You make this so easy!
Yes but how do u do the bigger ones ???
@@Gizmo85 I don't know if by now you figured it out since it's a 1 year old reply, but here's a guess: you know how he built it like a cross? im guessing you extend it maybe and then you just do the rest? idk
The upper part of the video showing the whole while you put it together is extremely helpful. Been looking for a “how to” on this for ages. Thank you.
How can someone not like this video. It's perfect in every way.
Thank you for your time! ❤️
Thank you so much! I've been trying to figure this out on my own but never knew that blueprinting it popped the floors inside of it! Definitely using this for my build this week, and I'll be sure to point out where I got the method from!
Ooh, great tip! This seems much easier than using the flame thrower to delete objects. Thank you!
I just ran into someone who built part of their house using this method. They directed me here. Amazing. Sharing with my friends.
Thank you so much for this video. I’ve been looking for something like this. I found a really cool camp location and have been trying to find a way to build a round type structure around it and this is perfect.
This is great! Did it on my first try, not perfect though. Is there a way to make a pointed roof rather than flat?
If you place the angled roof tiles on facing outward on your blueprint, the clip together too. Good tutorial 🙂
What do you mean? Which angled roof tiles?
The angled ones won't place
@@johnmoaby6517 place a flat roof on the inside of the blueprint then an angled on the outside. Then remove the inside flat.
@@jackomarafallout7664 I've tried this and just can't get it to work. :(
I don't see how it could tbh. The angles roof tiles need at lease two walls (one higher, one mid height) to connect to. How did you do this @Jackomara?
Awesome but please show how to have floors on 2nd level instead of rooves and also how then to maybe have stairs or a nice tidy way to get up and down into 2nd story - using the smallest foundation possible... I like the octagon one! Thanks
Thank you for the video, it still works and it's a very easy one to follow for a visual learner like me
Not the video I was looking for but still a good idea! Also the top left overview is something I have ALWAYS wanted from other people! Props to that!!
great, but how do you fill the hole in the middle?
TLDR: IT STILL WORKS! not patched or anything
ayt, so its 2022, I just got fallout76 (3-ish) months ago and Im enjoying it so far as building was one of the most relaxing thing to do in fallout. The key to achieving the circular thing was to make sure each foundation (when rotating) is to intersect it with one another (not too obvious but to y'know.. its 'conjoined' in a way when you try to highlight-hover each foundation) build your walls by staying inside not outside while also using the individual foundation for each sides (2:13) , the glitch will do the rest, it took me alot of tries and so far this video is super simple and easy to understand (great video!) , just be patient :) ! Happy building, Vault Dwellers.
Thanks for the heads up. I’m going to try it later myself
Best video I have seen so far
Excellent man or woman ;) Love the tutorial simple straight to the point
Thank you.New ideas come.Does that mean,natural tree can be in middle of blueprint? Or any other things with enough space 😯
it is possible to save the ground, 1st floor with roofs and up to the third floor with roofs in one blueprint. three levels with every level roofs is to much for one blueprint. turned into glas and a tree in the middle or two with special lights to set up looks really awsesome. it is also possible to save a middle level only the walls as a blueprint to extend faster, but only walls and a roof wont work sadly😁 thank u so much for this vid👍
awesome very nice, and can you stack these to make more floors?
This is amazing! Thank you sooooo much! I was getting so bored of plain old square buildings. A question tho; when I lay down my blueprint, only one wall snaps to the inside. Is there a trick to getting them all to do it?
how did you get the roof to work - i can get a blueprint with out them to work - but when i try the roof it says item floating
Oops! Never mind! I figured it out. I had the walls on backward. lol.
@@TheHam8919 It's essentially the same trick you used to get the floor to merge inside the walls; just use square roof tiles. So place on on the inside of one wall, then place the other on the outside of the same wall. Then remove the inside one and repeat all the way around. In the end, remove the single inside roof tile and then save your blueprint, wreck everything, and then replace the BP. The floors and ceiling tiles on the outside should snap inside! Easy peasy! I'm still trying to figure out using the angle roof tiles though. It would be fab if I could figure it out.
Hi can you make video for mid and big circle please ?
Why thank you very much dear sir!
I saw the thumbnail and was thinking to myself; probably another flamethrower video, and i can't be arsed the extra effort it takes to break something, rebuild it, yada yada yada
But this... i will try out ASAP! :D
~CGTv
How do u build the bigger one
Witnessed!! Haha thanks for an easy to follow video
That is freakin' magical. Ohhhhhh, man. Makes me wonder what other wild things can be done with blueprints...
You are seriously a genius
What a brilliant video 👍🤯
How do you make the larger variants? Anyone that can help id appreciate it
5.04.2021 still works :)
So how can you make this multi-level? And can we get a tutorial on the big version you show please? I can see where the big version could be made multi level somewhat easily.
flame the roof with thrower, set walls, repair roof and build stairs in or outside the building
@@HerrFixiHartman Okay, maybe this is a newblet question, but how do you flame the roof. My weapon flame thrower does no damage. Do you mean the flame thrower trap?
I'm having a hard time making those other two sizes. Any tips?
Same!
maybe if you make the cross in the beginning bigger so from the middle 2 foundations to each side ,but im a newbie to the game but thats my guess
Any luck?
Can the big round power generator fit in the center of the larger build? I need to try this out. That gen would be cool to build out from
Awesome! One question, what if you don't want the hole in the middle?
Simple, easy, and not to quick thank you
Is the hole at the top where you enter, or is there a way to plug that up and make an actual door
Thank you for this video!
Tried this. Sadly I belive they fixed it. Any chance you know other ways to so so?
Did you ever end up finding a new prototype hazmat suit spawn location? Also if you made a new camp build series that would be cool
reminds me of building towers in Conan Exiles
wow now that is worth watching thanks mate stay safe you all.👍👍👍😍😍😍😍💖
How do you make the large circular structure? I can do the small one but I can't figure out how to make the large one due to the gaps as you extend the outer section where you place the walls
Brilliant, ty!
Can this be used for half circles or octogons as well?
Where did you build this? What road? Because I didnt realize how unflat this entire map is until I tried this method...
It's the airport I believe
Lover it! Thank you!
It would be so much easier if they actually gave us more building options. Seriously what is with em and squares
Ugh right? It seems like every survival game I've played only allows and offers square tiles. Blech. Give us tower pieces and more round building sets!
So how do we fill the holes in the middle ?
DUDE!That's awesome, thank you!
Has this been patched or something? Can't get it to work at all
Thank you and I was finally able to make the small one. I am struggling to make the larger size ones, is there another video or any other help ?
can you do it with wooden foundation
Does this work with a half circle as well...or do I need to build the full circle and just remove the half I don't want after placing the blueprint?
not working anymore it only works at workshops each time i try and place it it keeps saying its floating ad i have moved my camp A lot
Does the roof trick risk with the angled/slanted roofs also?
Can this method be used with "2nd floors", just as the roof peices?
Handy to know if you excellently deleat the full frame and your like oh no I forgot to put the roof on you still can do it with the blueprint you made
Is it possible to make tree houses using this technique ???
I’m struggling to do this with more than 1 floor.. helppoo
How do you make the second size? I can make the 1 & 3rd no problem but for the life of me the second one is impossible
thank you, i dont use mic aways wanted to do this
Where is this flat location?
God’s work right here
Nice work, could you place blueprints down for me? I’m on PS4?
If you keep the center rock(s) and blueprint it, it should snap together with a full floor. did it last night. Roofing this Mofo is another deal tho.. man..build, burn repair repeat.
Has this been patched? I was able to create the blueprint but stayed facing the same way.
Nope, it has not been patched. I just did it today.
yes it was sort of patched but there are ways around it
@@basaltic_5099 thanks man, I appreciate it.
@@eldyrus3693 probably user error lol.
@@TravTheBuilder nvm i was wrong it still works.
In one of the games more recent updates they said they patched it but ig its still functional
So when it’s all said and done.... how do you get rid of the small hole left in the floor and roof?
I left the middle foundation when blueprinting
Took a few attempts but I got it filled it
Or throw a rug over it.
Won’t let me place the last floor I need
Well done!
THANK YOU!!!!
Love it ❤️
Anyone know if this still works?
The bottom didn't snap inside
Merci🤗
All the way up in Nuka world on tour I'm using this video
I'm gonna use a scaled down version of this method to build flyns arcade from tron with all my cool new arcade games and decor
OK I'm impressed
Hi all, mine keep clipping frantically once they all merge? Does anyone else have this issue?! If anyone could build a 2, 3 story ones of this building I’ll sort you with some stuff???
Do you mean the roof and floor clip? The graphics? That's unavoidable.
Does this currently work?
Yep
You never provided any tutorials on the circles...
It didn’t work. What did I do?
Dont show how to make the 10 or 12 sided foundations... :(
So basically, people can build a yurt
The foundations weren't perfectly centered. This bothered me.
That's just a matter of taking your time.
Is any of this patched out?
Still works
This is the easiest way for me to build a bay window without a blow torch lol
Shoot, was hoping it was something that actually worked on a console. :(
I did it wooo
Does not work anymore 😥
sure it does i just did it. you have to make sure its flat and aligned though
Yo witness wake up, need a vid on how to get cutting fluid recipe.
UFC Fallout
Awsome!! Thanks for the video!🥳🇧🇻im New in this game and this game is Awsome if they Only make NEW Boss Mutant only 2 Beast boss Mutant there!!come on Microsoft!!!!!!this game can be Nr 1coop online.
Poggers
So let me get this correct, you are more or less fooling the server into believing that the foundations should be inside the circle. Brilliant! It does amuse me that Bethesda building code can be used against them...ahahahahahaha.
Patched :(
Disliking because the creator is ignoring many questions.
That's to be expected, he doesn't explain why it does what it does either. This is a showcase video not a tutorial in my opinion.
@@J.erem.y So now you have to explain the intricacies of the code(which he doesn't have access too) to make a good tutorial? I was able to follow it with ease... and if you read the comment section has answered most of your questions. I disliked your comment because you're entitled and rude.
Doesn't work, no matter what materials i use and where i do it, wasted so much time XD
~CGTv
It's patched
I've just done this today on Pc. Works great
Just did this on ps4. Not patched.
just did this on PC today, still works
@@matthewwall3319 I just did it today on my PC. I think people are missing that you need to have the levels flush and the angles correct.