Restoring the Spring Tension on a HER Health Expo Retractable Frame

This short video leads you step by step for restoring the spring tension of a retractable roll up frame supplied by Health Education Resources.

[@arwyss]

This video really got me out of a jam today. Thank you so much! You’re still helping people out in 2022.

[@AegisComicsAlaska]

You just saved me $200 and removed my need for blood pressure medicine with your calm demeanor. Thank you!

[@AlanThomas1]

Why you would decide to make a video about this, I don't know. But I'm sure glad you did. Super helpful. Thanks!

[@peteraddison8323]

Im sure he said "God bless you in your ministry" a real man not afraid to bless in the name of the Lord

[@freydasmith7087]

An answer to prayer... Thanks Mr. Cleveland - My Moms in Prayer banner is ready to go. Thanks for this video!!!

[@JimHarrer]

Thanks, exactly what I needed to learn Mr. Cleveland. Appreciate the time you took to share.

[@jtillman3rd]

5 Star Review coming here!! I had an old projector screen that I haven't been able to roll up for about 7 years now. I was about to finally replace it until I saw your tutorial. OMG, thank God I did! Now I am not mechanically inclined at all, but I did follow your video to a tee and got my projector screen to roll up just like when I first bought it. And it only took me less than 15 minutes to do.... all by myself! I feel so dumb for waiting this long, but thank you sooooo much for your tutorial.

[@cliffdevries6519]

Thank you for your help. You saved me at least $50 for a new projector screen.

[@Marc-oc9hg]

excellent vídeo Charles! Thank you very much! It got me out of a jam.
Tip: Since I didn't have the thin needle nose pairs appliers and the vice grips, I used the side cap itself to roll and hold at the same time.

[@MrOPORA]

Thank you Mr Cleveland! You saved us!
Greetings from Russia!

[@RooBee50]

THANK YOU for this video. BEST one out there on restoring spring tension!!!

[@rodritchie4555]

God bless you for your video. I used the principles in it to fix a large front of house screen in our church. Similar to Henry P. below, I was also able to use the end handle itself to tighten the spring. Many thanks.

[@MrDonKain]

very useful u saved me, thank u from Spain Mr. Cleveland.

[@marialuisapereyra4662]

Muchas gracias señor Cleveland. Thank you so much. It was very useful.

[@sheryang1185]

Thank you! This video was such a big help!

[@unwantedillusions]

Thanks a lot Mr. Cleveland, It's a really helpful video.

[@Macaruba666]

Thank you for this, I’ve used it a number of times now!

[@MOR44455]

Thank you very much. Very useful information. Greetings from Spain!

[@phillypauly]

you have just blessed my ministry. I nearly lost my christianity trying to fix this thing.

[@nestorlima9836]

Exactly what I needed, thank you so much!

[@seormocha]

Thanks! Simply, effective, clear.

[@emilyclark1597]

Very helpful! Thanks for all the detailed steps...we fixed out

[@dorothybooraem6689]

Thanks so much for making this and posting it!

[@illisandor9959]

Thanks a lot Mr. Clevelamd!

[@maggielee8566]

Very helpful - thanks to your instructions, our roller blinds are fixed. We'd been scratching our heads for at least an hour over it. Thank you!

[@cibermae1970]

Thank you, Mr Cleveland, it worked perfectly. From Naranjo, Costa Rica, thank you very much.

[@HealthEducResources]

Great, glad to hear that

[@joeygallegos5442]

thank you so much. Just a thought, you can also hold the other end with another pair of vice grips locked in place.

[@KidzTVArya]

really good video....... You saved my Time and money

[@RobertKing2012]

Great job you explain very well. Just saved me $75 now I can just order a new banner and replace it, thx

[@HealthEducResources]

Way to go!

[@bertinogomez6888]

Very useful, you safe my life Mr Clevelan

[@sarthakharekrishna]

Your video helped me today, 5 jan 2023

[@bringyourmains6608]

Thank you sir, very glad you did this

[@mhSmits-nl5xk]

Thanks Charles!

[@rahulfadikar3795]

Thank you sir it was very helpful for me.

[@fredericserant3206]

Thanks from France ;-)

[@richardsmith8532]

thank you from good old blighty for this. just waiting for the glue to harden to adhere the blind back together and rewind as per this video.

[@jgilesh]

Thanks a lot! It's very clear =D

[@acevedogerman5413]

Thank you Mr !!

[@HealthEducResources]

Thanks Joey, that's a valid point.

[@ernestoernest2634]

this really helped me today, thanks a lot..

[@AniridiaNetUK]

Outstanding thanks it works! But you can do it just by unscrewing the end and tightening it without removing the cap but so it can rotate as well. If you do this with it standing vertical and between your knees its easy.

[@mightytorrente7993]

Thank you, your video is very helpful

[@angelconesallc4153]

Thanks dude ! Att signarama PF Tx.

[@mohamadnabiei5402]

Thanks so much. Helpful

[@waynoodonnell5532]

thanks for your time
well met
helped a lot

[@gont1553]

Thanks that was very very helpful 🖤........

[@charliem4767]

Genius..!!! Thank's

[@glaubergiscardribeirocouti2714]

Thank's! God bless you too.

[@physiolympha]

Prefecture explained cheers

[@georgesherpa]

Thank you!

Thanks a lot.

[@mannixtan7268]

Very helpful video.😃👍

[@maurenpardo]

Thank you! I was about to cry 😅 because I couldn’t figure it out 😂

[@paul18896]

Waoooo ,it really works, thanks Man 👍👍👍

[@paulofigueiredo6931]

excelent!

[@uncledaku7382]

God Bless YOu Sir

[@BurnAlong]

Still helpful in 2022, thank you!

[@benosotrossomosequipo8560]

thanks good video

[@tonnymarrufo123]

Thank you brother, Yesterday I had to fix 3 and I couldn't do any.

[@slametmuharis3251]

Thanks u from indonesia.... 👍👍

[@olinsoto9366]

Thanks!

[@imprimerielina949]

thx so much sir, u really save my day :D
really appreciate that (y) (y) (y)

[@VictorUmeh]

Thank you

[@dgw4049]

U da man!

[@SiwachHandwritingClasses]

Fine sir so thanks

[@koukhprinter5567]

thank you

[@vrnn6102]

Thank you sir 🥳🥳🥳🥳

[@christophernelson978]

What needs repairing on mine is that the actual spring has lost its tension from end to end, how do you fix that back.

[@jaas666]

You can use the vise grip with the en cap in place.. a lot easier than holding it with the pliers...

[@joshuadaley16]

Not if it went inside, though. Mine went inside during shipping, so it wasn't even sticking out!

[@wmswrld]

thank man

[@amedjamesrafaelo767]

Excelente

[@fulllifemarketing4532]

Henry P is correct. I could never transition from the vice grip to the needle nose. Just wound it with the endcap instead.

[@joshuadaley16]

Thanks so much! I got it fixed, but now I am still wondering, did I break it? Or was it broken when it arrived? What is that little key for? Am I supposed to put that in the hole before I use it? SO many questions, and the idiots sent zero instructions.

[@alytaromy]

God bless you too 😉

[@henryp.2861]

Do not remove end cap. Loosen all screws at the slotted end, leave end cap on, but with all the screws off , you can just turn whole end cap. No need for vise grips or needle nose pliers.

[@HealthEducResources]

That's a good point, and it can work well also, thank you.

[@MrNoyoki]

Ĺ

[@eduardoomar8213]

i know im randomly asking but does anybody know a tool to log back into an instagram account?
I stupidly lost my account password. I would appreciate any tips you can offer me.

[@terrywaylon8521]

@Eduardo Omar Instablaster ;)

[@eduardoomar8213]

@Terry Waylon Thanks so much for your reply. I found the site thru google and I'm in the hacking process atm.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@Blem4Life420]

This has changed my fucking life

[@TwoMaga]

Мужик, ты красава

[@ervinvitek3306]

little improvement: u dont have to use pliers and tools, just use console, bit easier, jist did it thanks for inspiration

[@Berluskony]

I used to repair rollup only a screwdriver. Winded end cap without removing it. It is much easier ;-)
Я для ремонта роллапа использовал только отвёртку. Наматывал торцевой крышкой не снимая ее. Это намного проще ;-)

[@AfzalKhan-bx8hp]

Семен Семенов o

[@AfzalKhan-bx8hp]

I
O

[@reginaldcortez8763]

Can this process be completed when entire shade is still hang in place ?

[@naveensahabandu115]

Hi sir... may i know why pullup banner bend front after....

[@sojoudhussein]

What do i do if i lose the other end and the spring gets messed up?? 😓

[@samsobaka]

молодец

[@sajankumarslimillionaire7030]

What to do when back stick broken

[@spikemcclure4052]

Thanks for the tutorial! Why did I waist an hour trying to figure it out by myself?

[@helterskelter485]

Punya kita dol cokk gimana anjir

[@xavieroshiro3257]

muy mal, grabare uno mejor!, asi provocaras accidentes!

[@nicolasguarin3302]

Thank you!