Power Genius XL, Tuner Genius XL and Antenna Genius integration overview

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ม.ค. 2025

ความคิดเห็น • 7

  • @tecina75
    @tecina75 7 หลายเดือนก่อน +1

    When will there be an integration of the tuner and power genius within the smartsdr

  • @dennisdinga218
    @dennisdinga218 ปีที่แล้ว +1

    In your first tuning example you started out with a challenge of 8:1 SWR. The tuner corrected it to 1.8, then 1.08 which is nice, but what is the maximum power allowed out of the amp with such a large of a correction? You skipped that part by only driving with 20W which produced only 500W out of the amp. Same with the second example in which you corrected a 4:1 SWR, but didn't mention that the amp can no longer put out 1500W or the tuner may fail.
    I own two competitive solid state LDMOS amps and both will correct high SWR, but the catch is they fold back the output power to prevent blowing up the finals.
    I wanted to see if your tuner had heavier duty components which would allow putting out max legal power at high SWR. That would really pique my interest.
    Thanks Mike,
    -Dennis N6DD

    • @FlexRadioSystems
      @FlexRadioSystems  ปีที่แล้ว +1

      To ensure optimal operation of your setup, it's important to understand the specifications and limitations of your equipment. In the case of the TGXL, full amplifier power is permitted. However, exceeding any design ratings may result in the termination of transmission to safeguard the device.
      Monitoring SWR (Standing Wave Ratio) is crucial for maintaining efficient RF power transmission. If the SWR exceeds 2:1 at the amplifier antenna port, the PGXL is designed to initiate a fold-back mechanism, reducing RF power. Rest assured, the TGXL and PGXL are engineered to handle SWR ratios up to 10:1, ensuring reliable performance.
      While it may have been possible to achieve full power on the 60M dipole, it's important to consider the potential risks involved. Higher voltages associated with full power transmission could potentially damage the installed balun. Protecting the integrity of your equipment is paramount.
      Remember, your antenna system starts at the connector connected to hardware like the PGXL or TGXL. Take the necessary steps to minimize SWR at the end of the feedline, whether it's through the use of a radio, tuner, or amplifier. Neglecting proper SWR management can lead to compromised performance.
      It's crucial to acknowledge that there are no shortcuts or magical fixes in antenna design. Simply installing an end-fed half-wave antenna and relying solely on a tuner will not yield the same results as a well-designed and optimized antenna system.
      Investing time and effort into optimizing your antenna system will greatly contribute to maximizing performance and protecting your valuable equipment. Take charge of your setup to ensure the best possible experience in the world of amateur radio.

  • @GH0ST369
    @GH0ST369 หลายเดือนก่อน

    Only get a thumbs up if the chat is open.
    Thank you for the video, how do you power this 240v with a one leg plug/cord?

  • @boydsharp
    @boydsharp ปีที่แล้ว

    Can I use the Tuner genius with an ACOM 1010 amp? I am slowing building up my Flex and Genius setup in stages.

  • @alfredkwok9239
    @alfredkwok9239 4 หลายเดือนก่อน

    good demonstration