making a simple cabinet using basic tools/paano gumawa ng simpleng kabinet

[@joeduvall3891]

It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better th-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.

[@rafaswoodcraft]

Thanks for watching

[@maricelsantuyo350]

Ano po b atawag sa pinangdikit nyo po

[@MikaSangalang6671]

Mukhang madali lang gawin .pero mahirap . Sipag at tyaga talaga .

[@rafaswoodcraft]

Thanks po

[@rodmriver]

Nice... its a Good Job...

[@rafaswoodcraft]

Thanks for watching po

[@meganledesma5091]

Pre your the best

[@rafaswoodcraft]

Thank you pre

[@myadventurevlogs1144]

Wow, ang ayos ng pagkakagawa, nice craptmanship ..

[@rafaswoodcraft]

Thank you po

[@jdarerbac9802]

ito ung tinatawag na skill. galing mo lodz

[@rafaswoodcraft]

Thank you po

[@kapoppomarinavlogs]

magandang gabi napakaganda ng iyong mga likha idol. ipagpatuloy mo lamang ang iyong talento

[@rafaswoodcraft]

Thank you po

[@JunTiksayVlogs]

Salamat sa video mo idol mayron akong kohang aral dito❤😊

[@rafaswoodcraft]

thank you po lods God bless panoorin ko rin mga video nyo more power

[@user_bilal]

good job, nice cabinet

[@rafaswoodcraft]

@@user_bilal thank you!

[@travelifestyleph.1569]

Nice ,Ang Ganda Ng pagkàkgawa niyo po.

[@rafaswoodcraft]

Thanks for watching po

[@nephsoundwork781]

Nice idol👍 watching idol

[@rafaswoodcraft]

Yes, thank you

[@LesPoquiz]

Nice Vlog, request po sana to content ng tools and materials na normally need sa pagawa ng nga ganyan, like cabinets, Computer Table at iba pa. Maraming salamat po 😍

[@rafaswoodcraft]

Thank you so much po🙏

[@archflynn7565]

@@LesPoquiz tama para matuto rin mga baguhan. Dagdag content na rin.

[@mixnikuya2946]

Salamat boss sa magandang kaalaman sa cabinet.God bless po

[@rafaswoodcraft]

Thank you po

[@joelocuaman]

Ang galing naman po Gosto ko ren matotong gumawa ng kabinet e

[@rafaswoodcraft]

@@joelocuaman kaya nyo din po gumawa sir practice lang po

[@lhenmarila3190]

Ang galing ni kuya..sana all

[@rafaswoodcraft]

Thanks for watching po mam

[@chardserranovlog8303]

Ok lods.. Good job lods.. Lods new friend and subscribers lods.. Always support lods.. Ingat sa work

[@rafaswoodcraft]

Thank you po idol God bless po

[@budoyvlog]

Ayos.....👌👌👌

[@rafaswoodcraft]

Salamat kabayan idol🙏🙏 hehehe😁

[@sherwoodforrest]

Napaka skilled nyo po. Keep it up

[@rafaswoodcraft]

Thanks po sir

[@vernonpaul1347]

Superb, who needs all those fancy noisy tools.😂

[@rafaswoodcraft]

Thanks for watching 😊

[@JhunDumsTVXj]

wow amazing

[@rafaswoodcraft]

Thank you

[@JunNaling]

Galing tuloy tuloy lang sir, keep it up more power sir

[@rafaswoodcraft]

Thanks po

[@gmakhanes8961]

Biglang lumabas sakin to ok din hilig ko rin mag diy

[@rafaswoodcraft]

Thanks for watching po

[@djkemzofficial2038]

Very educational. Keep working this kind of videos sir.

[@rafaswoodcraft]

Thank you, I will

[@mamalheyroslin1338]

galing ng kamay mo kuya..ka mommy lhey tinderela po

[@rafaswoodcraft]

Thank you po

[@tenggoyztv5071]

Ok lods galing mo👍

[@rafaswoodcraft]

Thank idol

[@Sedulor-slamet]

Terimakasih banyak sudah mau membagikan ilmunya 🙏👍

[@artsnlife47]

Thank you for this useful video

[@rafaswoodcraft]

Thank you po mam 😊

[@LezeilPadua]

Nice idol gling nman❤❤❤

[@rafaswoodcraft]

thanks idol

[@bryanvalenzona3684]

Galing mo nmn lods

[@rafaswoodcraft]

Thank you lods

[@cyberhomechanneltv9456]

Galing mo boss, ganda pagka gawa boss

[@rafaswoodcraft]

Salamat po

[@accountalkseasier2142]

galing ni kuya ansipag pa

[@rafaswoodcraft]

Thanks po ❤️

[@lorenakati]

Ito ang tinawatag na talent, galing Nyo po, ganda ng gawa nyo

[@rafaswoodcraft]

Salamat po

[@ironvsfiretv6204]

Ang galing mo pala lods?

[@rafaswoodcraft]

Salamat lodi

[@bambooku]

❤❤❤ from Indonesian

[@rafaswoodcraft]

Thanks for watching

[@boxing_reign]

nice skills sir keep it up

[@rafaswoodcraft]

Thank you, I will

[@rafaswoodcraft]

Thank you po

[@JunTiksayVlogs]

Wow ang galiing mo idol ❤

[@藤-v4o]

That's a very good video. Please tell me the name of the tool used to carve small pieces of wood. Product name if possible

[@rafaswoodcraft]

@@藤-v4o lotus palm router sir

[@藤-v4o]

@@rafaswoodcraft thank you.
I would like to know the product name of the plane used in the video, not the router.　8:19

[@rafaswoodcraft]

@藤-v4o it's just a simple small hand planer that I bought on Lazada online store

[@kalasa26]

Galing nman

[@rafaswoodcraft]

Thank you po 😊

[@kaalamantv9524]

Nice idol

[@rafaswoodcraft]

Yes, thank you

[@crisantobartolini9657]

wow ang galing nyu naman po

[@rafaswoodcraft]

Salamat po☺️

[@mariafonseca1481]

👏🏼👏🏼👏🏼👏🏼👏🏼

[@o-gesto6755]

Galing lodi

[@rafaswoodcraft]

Salamat lods😊

[@ednadeguzman1903]

Nice craftsmanship, 1/2 edges will make the cabinet smooth looking.

[@rafaswoodcraft]

Thanks mam🙏

[@keemzero4151]

grabe 10mins lang nya ginawa yung cabinet. idol

[@rafaswoodcraft]

Hehe thanks for watching idol

[@MinsetGaming]

Edited yung video malamang 10 mins lang hahahha

[@rafaswoodcraft]

@@MinsetGaming hehe opo sir

[@bastisab]

Galing mo lods.. Hirap maglagari ng ganyang kakapal na plywood..

[@rafaswoodcraft]

Tyagaan lang po sir hehe

[@eyeshieldgalamiton6905]

Ang basic na tools na gamit nyo lang is lagari...
Lahat power tools na...
Ako gumawa ako ng cabinet lahat halos mano2 pag gawa wala kasi ako power tools...kahit pag gawa ko ng butas para sa concelled hinges mano2 din...
Yun ang pinaka basic...pero disclaimer lang po d po talaga ako karpentero...nanonood pang din po ako ng mga diy videos...
Pero boss...hanga din po aoo sa nyo...ayus din ang gawa nyo...

[@MariaCristinaTagorda]

Ang galing Naman gumawa

[@rafaswoodcraft]

Thank you po for watching 😊

[@carmeladiumano6618]

ang bilis nyo po gumawa ng cabinet idol

[@vinjzpabz7545]

Ganda ng paggwa sir..ano tawag sa pang pako nio sir??

[@rafaswoodcraft]

Electric nailgun po sir thank you po

[@MrDojee]

👍👍👍👍👍👍👍

[@joymarkdian2771]

Ang galing mo sir. More tutorials pa po. Ano po pala mga pangalan ng materiales nagamit ninyo? Salamt po

[@rafaswoodcraft]

Thanks for watching po

[@rafaswoodcraft]

Plyboard po gamit sir

[@EllahRennisonVlogs]

sa kabuuan at panglikod? ano po gamit plywood at sukat

[@rafaswoodcraft]

Plyboard po and yung pang likod po 1/4" plywood

[@janahjeanabella2381]

Pwde po malaman ano anong sukat mga yan sir isang buong flywood lang gamit mo?

[@rafaswoodcraft]

3ftx3ftx1ft po sukat mam

[@bugsgarage2951]

Magaling po!

[@rafaswoodcraft]

Salamat po❤️

[@atedesmixtv5084]

Ang galing nyo naman po gumawa ng cabinet

[@rafaswoodcraft]

Thank you po

[@ahlekssa]

nung tawag dun sa equipment parang ni shape or ni balance or ni grind nya yung may mga sobra sa sides nung kahoy?

[@rafaswoodcraft]

Trim router po mam

[@meganledesma5091]

I love u pre

[@AlexisLibunao-jw9yv]

Galing idol soilid. Tanung lang idol anu mga materials ginamit mo para makagawa ng ganyan cabinet? Thank you in advance.

[@rafaswoodcraft]

Thank you po sir eto po materyales na nagamit
1 pc plyboard 3/4"
1 pc plywood 1/4"
4 pcs ½x1 edging
2 pairs #1 concealed hinges
2" finishing nails
1" finishing nails
Wood glue

[@rpmselarom854]

Ano Po magandang gawing cabinet Kuya Yung plywood ba o plyboard at ano po pampakinis na ginamit mo SA board?

[@rafaswoodcraft]

Plyboard po mas mura po sya, liha lang po gamit pampakinis kasi makinis na rin naman po yung plyboard salamat po

[@ednalynnatividad2893]

Sir ano pong wood gamit nyo. And materials na din.

[@rafaswoodcraft]

Eto po ang material na nagamit ko po dyan sa small cabinet mam
1 plyboard 3/4"
1 plywood 1/4"
Liston/edging ½X1
Stikwel
C1 concealed hinges

[@crisdelapena2757]

Sir anong pong playwood gamit nyo slamat

[@rafaswoodcraft]

3/4 plyboard po thanks po

[@AlfieOcfemia]

Ano po mga materials sir ginamit

[@rafaswoodcraft]

@@AlfieOcfemia plyboard 3/4" po ginamit ko dyan

[@diablo7280]

​@@rafaswoodcraftAno pong tawag doon sa parang kinakaskas ninyo sa may pinto

[@rafaswoodcraft]

@@diablo7280 katam or hand plane po

[@Albert-ck9vw]

Sir the wood is plywood or what do we call?

[@rafaswoodcraft]

Plyboard po sir

[@Albert-ck9vw]

@@rafaswoodcraft thankyou for your reply 👍

[@rafaswoodcraft]

@@Albert-ck9vw welcome

[@christianlunaii5844]

Hi po anong tawag sa parang baril or driller na pula n gamit mo po? Thanks po

[@rafaswoodcraft]

Electric nail gun po sir mitsushi brand po mura lang nasa 1k+ lang po

[@SecretLee]

Hi. Merun po ba kayo video on how ikabit ang cabinet hinges? Para pantay yung cabinet door?

[@rafaswoodcraft]

@@SecretLee thank you po gagawa po ako ng video how to install hinges salamat po sa support

[@cassbabyahri2775]

Anu tawag duon sa pula na electric

[@rafaswoodcraft]

Electric nail gun po thank you po

[@Ra_chelSumayao]

Hello sir anu ..po sukat nyan sir pa share naman po

[@rafaswoodcraft]

Hello po yung sukat po 36x36x12 inches po thanks po

[@marygracevalle2645]

sir ano pong tawag jan sa mliit nio na pang katam?..at ska po ung manipis na inilalagay nio sa gilid?.

[@rafaswoodcraft]

Yung manipis na na pang edging po is liston ½x1"
Katam naaliit lang po yung gamit ko dyan mam mumurahin na katam lang po nabile ko sa lazada, thanks po

[@serendipitythirteen98]

ano po twag sa pinang babaril nyo parsng stapler po ba yan?

[@rafaswoodcraft]

Electric nailgun po

[@Sam-yp1pe]

ano tawag sa inaaplay mo na pamdikit sa kahoy

[@rafaswoodcraft]

Stikwel po sir

[@whitechocolate4072]

Trabaho lang bahala na kay dyan, wala ng sukat sukat hahaha

[@rafaswoodcraft]

Hahaha opo

[@nidadeomampo6802]

Anung wood gamit nio..

[@rafaswoodcraft]

plyboard po

[@ranzcator1246]

Stickwell po bayan?

[@rafaswoodcraft]

Opo thanks po 🙏

[@AnjzRocacorba]

Ano pong tawag sa ginamit nyong tools na kulay pula ?

[@rafaswoodcraft]

Electric nailgun po

[@EllahRennisonVlogs]

Ano po gamit na plywood?

[@rafaswoodcraft]

Plyboard po mam

[@pomporoy5763]

master

[@03lhanz]

Anong klaseng flywood po yong ginamit nyo

[@rafaswoodcraft]

3/4 richmond plyboard po

[@tolentinoosayan3493]

Yes all very basic...

[@lerei8862]

Kasya po ba isa plywood sir? 4×8ft

[@rafaswoodcraft]

Yes po mam kasya po isang buong plywood

[@alen670ify]

sir.. anong klaseng flywood po ang gamit nyo at anong size pra sa pggwa ng cabinet.. tia po..

[@rafaswoodcraft]

plyboard po thanks po

[@karysmastudio]

anong wood po gamit niyo?

[@rafaswoodcraft]

Plyboard po

[@karysmastudio]

plywood po or plyboard?
san po location niyo? pwede ko po ba kayo mavisit for potential business collaboration po?

[@rafaswoodcraft]

@@karysmastudio yes po pwede po pasay po location

[@rafaswoodcraft]

@@karysmastudio eto po fb page namin message lang po kayo facebook.com/woodcraftbymarlo?mibextid=ZbWKwL

[@jeffreylim3097]

isang buong plyboard po b yan o mga nbbli n po mga cut na

[@rafaswoodcraft]

@@jeffreylim3097 opo Isang buong plyboard ako na po nag cut

[@jeffreylim3097]

@@rafaswoodcraft mgkanu po kaya isang buo ng plyboard?

[@rafaswoodcraft]

@@jeffreylim3097 nasa 1100 po presyo ng plyboard

[@jeffreylim3097]

@@rafaswoodcraft salamat po

[@manalolittlefarm7158]

Mahusay po

[@rafaswoodcraft]

Salamat po

[@ZiamarCagadas-pw6xn]

Ano po yung pinandikit?

[@rafaswoodcraft]

Stikwel wood glue po

[@rafaswoodcraft]

Thanks for watching po!

[@ZiamarCagadas-pw6xn]

@@rafaswoodcraft sir maganda kung may vedio po kayu yung ipakita mo yung mga tools na gagamitin tsaka mga pangalan nito.para po may idea kami kung ano pangan if ever bibili kami ng mga ganyamg tools.start today lagi npo akonv manunupd sa mga vedio mo

[@rafaswoodcraft]

@@ZiamarCagadas-pw6xn opo next video po isama ko po hehe, newbie lang po kasi sa youtube hehe

[@crislubetania1985]

Sir pwd malaman ang mga sukat,?

[@rafaswoodcraft]

Yung taas po 3ft yung lapad 3ft tapos 12 ft yung kapal nya sir

[@kingfinn9948]

Ano brand nail gun mo lods

[@rafaswoodcraft]

@@kingfinn9948 mitsushi lang po brand lods

[@ryanorcullo3068]

pwede poba lagyan ng hinges ang 1/2 na plywood sir?thanks

[@rafaswoodcraft]

Pwede po kaso yung ordinary hinges lang, hindi po pwede yung concealed hinges sa 1/2 plywood

[@rafaswoodcraft]

Or pwede nyo din lagyan ng 1/2x2 na kahoy paikot para kumapal yung 1/2 para maging 3/4"

[@ryanorcullo3068]

ah..gnun ba sir salamat sa info sir

[@rafaswoodcraft]

Welcome po sir

[@marmelynlachica7552]

anong tawag po jan sa nilalagay nio na pandikit sir?

[@rafaswoodcraft]

Stikwel glue po mam

[@rafaswoodcraft]

Thanks for watching po🙏

[@maryjanesalvador1415]

ano po tawag sa gamit nyo paglagay ng tox b yon??saka ung sa pangdikit..

[@rafaswoodcraft]

Yung electric nailgun po ba mam

[@maryjanesalvador1415]

thank..planning na gumawa po kasi ng ganyan sir..using ur video..thank you so much po❤

[@rafaswoodcraft]

Thank you po mam sa panonood ng video

[@marryqueencarabio7077]

Anong kahoy po yung gamit niyo tapos bali ilang pcs yung na gamit sa pag gawa into po Niyan?

[@rafaswoodcraft]

Plyboard po 1 piraso tsaka 1/4" plywood para sa backing mam

[@archflynn7565]

Ano pong kahoy gamit nyo balak ko gumawa lagayan sana ng plato sa ilalim saka kaldero. Ty

[@rafaswoodcraft]

Plyboard 3/4" po gamit ko dyan thanks po

[@archflynn7565]

@@rafaswoodcraft mas ok ba lods yung board?

[@rafaswoodcraft]

@@archflynn7565 ok naman budget friendly kasi mas mahal ang plywood kesa plyboard pero pag sa kitchen cabinet mas maganda marine plywood ang gamitin

[@archflynn7565]

@@rafaswoodcraft yan nga rin napanood ko para sa nababasa daw. Pwede rin kaya yan patungan ng rice cooker? Balak ko kasi lamesa ibabaw patungan ng rice cooker, ilalim lagayan ng plato, kalder, stacks.

[@rafaswoodcraft]

@@archflynn7565 yes po pwede po patungan ng rice cooker sir

[@floranteugbamin8502]

Wala po bang sounds? Yong mga gamit na kahoy at yong parang adhesive? Gusto ko sana matuto

[@rafaswoodcraft]

Thanks po mag upload po ako step by step ng cabinet making for beginners thank you po!

[@rjdolalas7480]

Anong tawag sa board na ginamit niya? Balak ko po kasi magpagawa ng laundry shelves

[@rafaswoodcraft]

plyboard po 3/4"

[@echimithegreaterestsss1991]

Ano yung pandikit mo ser?

[@rafaswoodcraft]

Stikwel wood glue po

[@echimithegreaterestsss1991]

Salamat po..

[@rafaswoodcraft]

@@echimithegreaterestsss1991 thank you for watching po

[@MercyLim-q1t]

Stick well

[@brytv26]

Ano po yung ginamit niyong pandikit?

[@rafaswoodcraft]

Stikwel po

[@brytv26]

@@rafaswoodcraft ok lang po ba kahit pako nalang ang gamitin? Kahit wala nang screw?

[@rafaswoodcraft]

@@brytv26 opo sir ok lang po

[@brytv26]

@@rafaswoodcraft ano po budget friendly na pwede gamitin pang masilya po at pintura para sa plyboard?

[@rafaswoodcraft]

Pwede nyo po gamitin yung boysen glazing putty nasa 200+ po yun ready to use na tapos top coat nyo ng quick dry enamel,
2nd option water based paint
Primer davies wood primer q
Tapos pang masilya nyo maghalo kayo ng patching compound at woodprimer tantsahin nyo lang po yung timpla tapos pagkaliha pwede nyo na rekta top coat
Top coat Davies aqua gloss enamel

[@MariaCristinaTagorda]

Sir anong tawag diyan SA pangbbarena niyo na ginamit pati Yung pampako na de kuryente salamat

[@rafaswoodcraft]

Electric nailer po mam

[@MariaCristinaTagorda]

Thank you po

[@rafaswoodcraft]

@@MariaCristinaTagorda thank you po mam

[@ranglerrr1956]

Sir anu pong gamit nyu pampadikit?

[@rafaswoodcraft]

Stikwel wood glue po sir

[@shirleymallari9760]

Hi po,new subscriber po,ask ko lang po ano pong glue gamit nyo,ung pangalan po,gusto ko din po kasing magpagawa sa asawa ko nyan para hindi na kami bibili

[@rafaswoodcraft]

Hello po stikwel lang po gamit ko glue mam salamat po God bless

[@dhonglibardos7063]

anong tawag sa glue na pang gamit mo po sa wood ??

[@rafaswoodcraft]

Stikwel po sir

[@joancrisostomo9428]

Anu po name nang wood na ginamit ninyo sir

[@rafaswoodcraft]

@@joancrisostomo9428 plyboard po ginamit ko

[@jmairgela9187]

anong klase po wood gamot nyo

[@rafaswoodcraft]

@@jmairgela9187 plyboard 3/4" po ginamit ko