Firstly, never apologize for being bad at English, the fact that you have made the effort to learn another language is in itself impressive. You're a damn Wizard man and Thanks for the Epic tutorial. I really needed this help.
Your English was great! Thank you for going through the effort of translating everything for those of us who aren't bilingual. You totally changed my camera setup for the better.
thanks bro wizard and you help me a lot.. to be honest no english is perfect.. i learned that on NY, people create new words or slang every single day.. so your english is really clean to me honestly..
Thank you for sharing. At first it didn't work for me then I updated my firmware from 1.0.0 to 1.1.0 with SD card and now it works!! Also your English is good.
Great tutorial. Thanks. Just need one help. How did you assign the front dial to change the iso. Whenever I use that dial, I could only change the shutter speed. Thanks in advance
Thank you 😁 you can switch through the overlays with the control pad, in the only overlay that is displayed you can select the shutter speed and then change it with the control dial. The change then also works with the clean output
Worked for me! was getting memory card error. had to open with notepad++ and re-save. also changed the k to a c in disc for the script file. did this with m100
Awesome man! Thanks for doing this, I'm going to be offering online drum lessons and am using 2 m100s for different angles. This is a lifesaver as my lessons are 30-60 minutes!
Thank you so much for the tutorial. You just made my m100 a lot more useful. Ihr Englisch war sehr gut und leicht verständlich. Haben Sie keine Angst, es noch einmal zu tun. 👌 vielen Dank
Here a Linux bash version of getting the SD card into script mode - after formatting as FAT you can use this command - it worked for me. echo SCRIPT | dd bs=1 count=6 seek=496 conv=notrunc of=/dev/sdX1 where X is your SD card. And THX for the useful video !
HEADS UP GUYS..: Just found out that FAT32 also has a minimum volume size of about 260MB so the smallest card you can use is 512MB... Don't fret though, it does still work with FAT instead of FAT32. I have tested it. It seems to still be working as intended so far, but just incase, would be best to get an SD card with minimum of 512MB.
Fantastic tutorial! Also, you mic sounds soooo good. Crisp and clear. What mic are you using? And what settings have you made to make it sound so amazing? Cheers from Sweden!
Thank you so much! I use the tonor q9, which is a relatively cheap microphone but in my opinion it has a good sound ... otherwise I added a bit of compression in obs.👌🏻
You’re awesome man! I was nearly to get crazy with this M100... great video, great explanations, don’t care if you’re reading... the result is amazing!!!
do you mean switch off? there are two different scripts in the forum. one of them only gives you the clean HDMI, the other also deactivates the automatic switch-off. look if you are using the correct script. I don't think it has anything to do with the fw, but I don't know exactly either ...
Your English isn't very good?! You had me fooled! You are very articulate and very clear. I had no problems at all understanding you. Thanks for showing us how to get clean HDMI!
yes there are very cheap capture sticks on Amazon. they cost 1/10 of a camlink and are not significantly worse... Y&H HDMI Videoaufnahmekarte - 1080P 30fps Capture streamen, HD 1080P Video Record via DSLR,Camcorder,Action Cam,unterstützt Videoaufzeichnung Live-Übertragungen www.amazon.de/dp/B088FTWLPH/ref=cm_sw_r_cp_api_i_DF9rFbMSN4994
Wonderful job, very helpful for my influencer career that's starting to take off, I was going crazy trying to figure this out, and your English was very good and easily understandable. Cheers!
Dude your English is good and thanks so much for making this video I have been using a C920 but would like to use my m100 since its so much better quality. Great Video and I will recommend it to my friends that also have the same camera.
Thanks for the guide!! The clean HDMI on my M10 works fine with this script but the only problem is that the display keeps turning off after a short while. Although I have "Eco Mode" and "Auto Power Down" turned off. The "Display Off" mode is on 1 min. and can't be changed to "off" or "zero". Any ideas?
@@haleyrogers8273 Unfortunately it is not possible with the M100. At least 2 years ago it wasn't. I got a M200 now. It works fine with that one and no need for any scripts. It works out of the box. Although the camera display still switches off after around 15 Min.
This works! Thank you so much sir! My parents have been struggling with having an ugly on board webcam for their conference meetings, I got lucky i had this M100 lying around here in my house and with your help I made it work as a webcam. thank you so much
Hello! great tutorial ^^ i have a question: how do you make your camera stay active after 30 minutes? my camera keeps deactivating the screen after 30 minutes (in power saving> display off) and the longest it can stay active is 30 minutes by default settings so.. a little help please??
Thank you for this video! wondering if it will be able to record video without red recording dot, etc, dirty hdmi for post livestream HD editing, will be investigating and trying this out! Thanks
@@NOPROTV yes.. thank you. I used Auto Mode before. And after i switch into Manual Mode now the screen clean.. prnt.sc/v6rgpv but i have another issue now because i reset the factory setting on the m100 so on LCD camera now show Yellow Horizontal Grid line but not show in Laptop/OBS/Zoom .. and last issue the LcD now black but show on the laptp screen 😂 try to got some best setting again
A little late to the party but just curious on what cable you are using to run the camera to the Algato cam link ? I dont see an hdmi out on the camera
@@NOPROTV do you happen to have a link to one of your livestream with it? Been searching all over the net and I can't find a video showing full screen of the video output from obs.
Thanks for the video. I followed everything and it works except my camera shuts down after few minutes. Is there a newer script of anything I miss so the camera keep on running?
Hi, thanks for the video. I followed the instructions but still see the AF square tracking.. I'm not sure the script really worked. I don't have all other info but also when connecting the camera via hdmi capture I don't have the live view..
Hello thanks for the video, its really helpful, but i got a little problem, the video output that came out, has a purple overlay. Is there a way to remove it? thanks
Thanks for the tutorial. Does the face detect autofocus still work once you've hidden the menus by running the script? Do you need to run the script every time you want a clean HDMI out?
Yes the autofocus and everything works normally. It’s enough if you put the script on the card once. Whenever you want a clean HDMI you start the camera with the key combination. If you want to use the camera normally, just turn it on with the start button - the SD card can remain inside 👌🏻
after opening with preview mode, if i want to use back to normal, can i turn it on again normally and i will have all the settings showing on the screen ? and same for going back to clean hdmi?
I can't confirm it because i haven't tried it myself, but a larger card should work if you can format it in FAT32. I think you will need an extra program for that... if you are successful you are welcome to let me know :)
Thanks for the video, very enlightening and direct. But I was unable to transmit to OBS using a blackmagic Intensity Shuttle. There is some other configuration to do. Thank you.
I'm sorry but I have no experience with the intensity Shuttle. When I use the camlink I just have to select it from the sources in obs and it works ... Doesn’t you get any signal? Have you tried another Hdmi device?
NOPROTV unfortunately i don't have another hdmi device. anyway, thanks for listening and make more videos like this. helps a lot of people. I will research about my board's compatibility. thank you
Hi, Quick question if you could help me please, does this camera feed out audio from through hdmi, If I was to use the built in microphone whilst doing the clean hdmi. Kind regards
@@NOPROTV thanks for replying. It was a decision I was going to make. I was considering purchasing one to connect to my outdoor irl rig. To live stream, so I don't have access to the cam.
i have a stupid question, what cord do i use to connect to my PC? i don't have an extra HDMI slot available, they are for my monitors? also do i use micro or mini hdmi on the m100>?
Hey Marc. Thank you for this video. Could you be so kind and tell which gopro you are using as webcam. Also there seems a remarkable quality difference
Thanks for sharing. Tried on my M100 and it is work the clean HDMI. But after 2-3 minutes it stop "recording". I need to softly pressed the shutter to make it on again. Is it commond problem? My M100 firmware is Ver.1.0.1, I am afraid this is the root couse of the problem.
Incredible tutorial friend! Everything works great, other than my camera being distorted... Anyone have any suggestions/solutions for this? I can rescale in OBS but would like to know why this is happening :) thank you so much!
does it affect the dummy battery to always turn on the m100 camera when streaming? I use the default camera battery for only 30 minutes, the camera turns on and then turns off and I have to press the button and it turns on again. I ask for a solution. Thank you
no you need a camlink or something similar, there is a cheap alternative on amazon... the software depends on what you wanna do, for streaming obs, for calls skype...
Great content. have you tried using the Canon webcam software with your M100? I have M100 and want to use it as a webcam but I don't want to buy camlink.
hi thank you! i don't know the software, but according to the website the m100 is not yet supported. Maybe it will come with an update. If you don't want to spend a lot of money on a Camlink, there are ten times cheaper alternatives on Amazon. I bought a cheap capture stick myself and would recommend it to others.
Wow this is great. This helps more a lot that other tutorial. But can you please help me hot to set up for streaming. what are the cables needed. I don't have hdmi cable that came in with the box. I think Its not really included in the box. Can you show me what are the things needed. Pleaseeeeee. Thank you so much. Thank you also for making an effort to translate this video in English..
Does your camera turn off after 30 minutes, too? I don't understand why... I turned the setting "Auto Power Off" off but it still shuts my camera down (Aperture is still open so the camera is not fully off). I get a Screen which looks like the TV Error with many colors xD
Firstly, never apologize for being bad at English, the fact that you have made the effort to learn another language is in itself impressive. You're a damn Wizard man and Thanks for the Epic tutorial. I really needed this help.
Thank you so much! 🤓
Hi There. I seem to be struggling with getting the VBR to load. do you know if there is a work around this?
@@WizardOfOz013 sorry what do you mean with vbr?
Your english is much much better than those who said they know english...
Your English was great! Thank you for going through the effort of translating everything for those of us who aren't bilingual. You totally changed my camera setup for the better.
Thank you, that‘s great!
thanks bro wizard and you help me a lot.. to be honest no english is perfect.. i learned that on NY, people create new words or slang every single day.. so your english is really clean to me honestly..
Thanks man, this video is very helpful.
Greetings from Hungary 😁
Thank you so much for making this video in english. once I get an SD card, I'll give this option a try! again thank you so much!!! *Tears of joy*
Thank you for sharing. At first it didn't work for me then I updated my firmware from 1.0.0 to 1.1.0 with SD card and now it works!! Also your English is good.
Great tutorial. Thanks. Just need one help. How did you assign the front dial to change the iso. Whenever I use that dial, I could only change the shutter speed. Thanks in advance
Thank you 😁 you can switch through the overlays with the control pad, in the only overlay that is displayed you can select the shutter speed and then change it with the control dial. The change then also works with the clean output
Really helpful video and great English skills!
Worked for me! was getting memory card error. had to open with notepad++ and re-save. also changed the k to a c in disc for the script file. did this with m100
Awesome man! Thanks for doing this, I'm going to be offering online drum lessons and am using 2 m100s for different angles. This is a lifesaver as my lessons are 30-60 minutes!
I'm happy that I could help 😁
Thank you so much for the tutorial. You just made my m100 a lot more useful. Ihr Englisch war sehr gut und leicht verständlich. Haben Sie keine Angst, es noch einmal zu tun. 👌 vielen Dank
Here a Linux bash version of getting the SD card into script mode - after formatting as FAT you can use this command - it worked for me.
echo SCRIPT | dd bs=1 count=6 seek=496 conv=notrunc of=/dev/sdX1
where X is your SD card.
And THX for the useful video !
HEADS UP GUYS..:
Just found out that FAT32 also has a minimum volume size of about 260MB so the smallest card you can use is 512MB... Don't fret though, it does still work with FAT instead of FAT32. I have tested it. It seems to still be working as intended so far, but just incase, would be best to get an SD card with minimum of 512MB.
Thank you for sharing your experience with us :)
Nice tutorial, you earn a new subscriber, continue doing this kind of videos
Thanks for the very good and useful information.
Your English is actually very good.
how did you connect the camera to the cables?
Danke, Mark. Very helpful guidelines - delivered in nearly flawless English.
Fantastic tutorial! Also, you mic sounds soooo good. Crisp and clear. What mic are you using? And what settings have you made to make it sound so amazing?
Cheers from Sweden!
Thank you so much! I use the tonor q9, which is a relatively cheap microphone but in my opinion it has a good sound ... otherwise I added a bit of compression in obs.👌🏻
You’re awesome man! I was nearly to get crazy with this M100... great video, great explanations, don’t care if you’re reading... the result is amazing!!!
Thank you so much!
NOPROTV man, I need more help, my m100 turns on 30 minutes, did I something wrong? Or I have to upgrade the firmware of the camera? Help me please!
do you mean switch off? there are two different scripts in the forum. one of them only gives you the clean HDMI, the other also deactivates the automatic switch-off. look if you are using the correct script. I don't think it has anything to do with the fw, but I don't know exactly either ...
Your English is great man!! No need to apologize!!
Your English isn't very good?! You had me fooled! You are very articulate and very clear. I had no problems at all understanding you. Thanks for showing us how to get clean HDMI!
Thanks bro ❤️
Your English was superb, as was your video. Great work
What's the maximum resolution it provides to OBS? Some old cameras are limited to 720p when used as webcam, can the m100 do 1080p when streaming?
1080/60 is no problem
Great tutorial, but after the initial excitement I noticed the Elgato Cam Link device costs like half the camera...any cheaper alternatives ?
yes there are very cheap capture sticks on Amazon. they cost 1/10 of a camlink and are not significantly worse... Y&H HDMI Videoaufnahmekarte - 1080P 30fps Capture streamen, HD 1080P Video Record via DSLR,Camcorder,Action Cam,unterstützt Videoaufzeichnung Live-Übertragungen www.amazon.de/dp/B088FTWLPH/ref=cm_sw_r_cp_api_i_DF9rFbMSN4994
Wonderful job, very helpful for my influencer career that's starting to take off, I was going crazy trying to figure this out, and your English was very good and easily understandable. Cheers!
English was great mate :) thanks for the video
Dude your English is good and thanks so much for making this video I have been using a C920 but would like to use my m100 since its so much better quality. Great Video and I will recommend it to my friends that also have the same camera.
Thank you very much!
did it work on you m100?
Thanks for the guide!! The clean HDMI on my M10 works fine with this script but the only problem is that the display keeps turning off after a short while. Although I have "Eco Mode" and "Auto Power Down" turned off. The "Display Off" mode is on 1 min. and can't be changed to "off" or "zero". Any ideas?
Were you ever able to figure out the solution to this problem?
@@haleyrogers8273 Unfortunately it is not possible with the M100. At least 2 years ago it wasn't. I got a M200 now. It works fine with that one and no need for any scripts. It works out of the box. Although the camera display still switches off after around 15 Min.
This works! Thank you so much sir! My parents have been struggling with having an ugly on board webcam for their conference meetings, I got lucky i had this M100 lying around here in my house and with your help I made it work as a webcam. thank you so much
Your English is really good!! I would've had no idea you were just reading Google Translate
How long does your m100 battery last when live streaming? How long will you be able to stream for before it dies?
Unfortunately, i cant tell you how long the battery will last, because i use an ac Adapter. So you can Stream as long as you want 😁
Hello! great tutorial ^^ i have a question: how do you make your camera stay active after 30 minutes? my camera keeps deactivating the screen after 30 minutes (in power saving> display off) and the longest it can stay active is 30 minutes by default settings so.. a little help please??
thank you I got this working! :) And your english is great!
Thank you for this video! wondering if it will be able to record video without red recording dot, etc, dirty hdmi for post livestream HD editing, will be investigating and trying this out! Thanks
Excellent, it works perfectly also when connected to a field monitor (Neewer NW-760, now called F200), I get 1080p 60fps.
Great 👌
Hi @NOPROTV may i ask something? In your screen has some small rectangle in top left sidescreen?
prnt.sc/v54c28 i made screenshot
hm, I've never had that 🤔 you may have to switch through all setting displays...
@@NOPROTV yes.. thank you. I used Auto Mode before. And after i switch into Manual Mode now the screen clean.. prnt.sc/v6rgpv but i have another issue now because i reset the factory setting on the m100 so on LCD camera now show Yellow Horizontal Grid line but not show in Laptop/OBS/Zoom .. and last issue the LcD now black but show on the laptp screen 😂 try to got some best setting again
Good luck as you get started the new channel.
Thanks Konstantinos 🙏🏻
Does the autofocus dual pixel work even with this method? Thanks
A little late to the party but just curious on what cable you are using to run the camera to the Algato cam link ? I dont see an hdmi out on the camera
Is the autofocus of the m100 good enough to keep you in focus when livestreaming?
yes, it always worked perfectly for me
@@NOPROTV do you happen to have a link to one of your livestream with it? Been searching all over the net and I can't find a video showing full screen of the video output from obs.
Thanks for the video. I followed everything and it works except my camera shuts down after few minutes.
Is there a newer script of anything I miss so the camera keep on running?
chdk.setepontos.com/index.php?topic=13489.10
This link takes you to the Script which also prevents the automatic shutdown 👍
Brilliant video. Your English is fantastic
a pleasant day. whre are two scripts? how to download the 2 scripts? thanks a lot.
Hi Nopro does the autofocus still working at this ? Thx to answer 🙏
Yes it will work 👌🏻🤓
Fantastic video, great help, your English is very very good, thank you.
Hi, that was nice explanation. Do you have maybe a link for that small camera holder on the top of the monitor?
your english is great!! i'm going to try this out soon for streaming!
Thank you!
You are a god among men. Thank you for taking the time to explain this. I was losing my freaking mind.
Great video! Not sure if I missed it or something, what is the cable from the m100 going to into the pc for the video? Thanks!
Finally can work .. thank you for the video tutorial. 👌👍👍
Hi, thanks for the video. I followed the instructions but still see the AF square tracking.. I'm not sure the script really worked. I don't have all other info but also when connecting the camera via hdmi capture I don't have the live view..
Manual focusing removes that
can i use hdmi capture other brands besides elgato cam link? i don't have the money to buy elgato cam link😅
Of course, i bought a very cheap alternative for my second camera myself. And it works perfectly 😁
@@NOPROTV thank you mr good luck for you🙏☺
Thanks for the english tutorial. You did an excellent job!
Thanks for the video Mark. But I can’t this to work, is it because the canon m100 firmware version is 1.1.0?
Your english is good for real! What is your microphone ?
Thank you :) it’s a Tonor Q9
Hello thanks for the video, its really helpful, but i got a little problem, the video output that came out, has a purple overlay. Is there a way to remove it? thanks
Thanks for the tutorial.
Does the face detect autofocus still work once you've hidden the menus by running the script?
Do you need to run the script every time you want a clean HDMI out?
Yes the autofocus and everything works normally.
It’s enough if you put the script on the card once. Whenever you want a clean HDMI you start the camera with the key combination. If you want to use the camera normally, just turn it on with the start button - the SD card can remain inside 👌🏻
Hello, first thank you alote for the video tutorial, i have a question on how to remove the auto focus square in the middle of the screen thank you
if you follow the steps in the video you will have just that...
@@NOPROTV It work YESS ! I was doing a step wrong ! Danke alote !
Danke für deine Mühe.👍
after opening with preview mode, if i want to use back to normal, can i turn it on again normally and i will have all the settings showing on the screen ? and same for going back to clean hdmi?
Yes 👍🏻
you can change the mode after switching to the original photo card. Or is it as simple as turning it off and then starting it up normally?
yes you do not need to change the sd card. just restart like normal 👍
You said it won't work with a larger SD card. Would something like 16GB work? it's actually cheaper to get that than a 1GB or smaller one
I can't confirm it because i haven't tried it myself, but a larger card should work if you can format it in FAT32. I think you will need an extra program for that... if you are successful you are welcome to let me know :)
@@NOPROTV I actually found a 16MB one on eBay for next to nothing 😂 seems to be enough storage based on how much space it took up in your video
Thanks, i`ve done it and it really works... very useful
Hi ! I cannot find the script for Canon EOS M3. Can you help?
Will this work on a Mac 🖥 thanks in advance
This was amazing!!! Thank you soo much. Im about to get into streaming and I have this camera. Cant wait to test it out :) English was perfect mate!
Thank you! 😁
Thanks for the video, very enlightening and direct. But I was unable to transmit to OBS using a blackmagic Intensity Shuttle. There is some other configuration to do. Thank you.
Can you help me?
I'm sorry but I have no experience with the intensity Shuttle. When I use the camlink I just have to select it from the sources in obs and it works ... Doesn’t you get any signal? Have you tried another Hdmi device?
NOPROTV unfortunately i don't have another hdmi device. anyway, thanks for listening and make more videos like this. helps a lot of people. I will research about my board's compatibility. thank you
You'er awesome man, love you, nice video!
gracias amigo, mi pregunta es para emitir en directo mas de 30 minutos es con el programa o por la bateria con cable?
Do I need two computers running OBS if I want to record a dual camera setup?
Hi,
Quick question if you could help me please, does this camera feed out audio from through hdmi, If I was to use the built in microphone whilst doing the clean hdmi.
Kind regards
I haven't tried that yet because I generally use an extra microphone. if you use obs just look at the audio sources if you can find the m100
@@NOPROTV thanks for replying. It was a decision I was going to make. I was considering purchasing one to connect to my outdoor irl rig. To live stream, so I don't have access to the cam.
I’ve been looking for this for so long!!! Thank you. Do you use any software to stream or once you plug in the hdmi it’s all set??
I use obs to use the source
Your English is good. Thanks for your help.
hi, sorry i have a canon m100 but i have a problem with POWER SAVING, display off maximum 30 minutes, how can use always on? thank you
Just wondering if you're using mf with the camera does it still have the box around your face? When going out through HDMI
Hm probably 🤔 don't have tested that
That's a GoPro Hero3+? Good to know! Thx for this. Well done!
Yes it is a Hero3+ 😁
When live streaming using the canon m100 does it overheat?
no, the m100 does not overheat, because theoretically it does not record or work, it is simply switched on
@@NOPROTV Thank you very much for this tutorial and this question also arose but reading the comments it has also been solved.
i have a stupid question, what cord do i use to connect to my PC? i don't have an extra HDMI slot available, they are for my monitors? also do i use micro or mini hdmi on the m100>?
Hey Marc. Thank you for this video. Could you be so kind and tell which gopro you are using as webcam. Also there seems a remarkable quality difference
Hey Berk Eren, thank you 😁 i use the GoPro Hero 3+ (silver i think 🤔)
NOPROTV hmm.. Thank you very much !! 🏆
What specific wire do I need to connect my m100 to video capture? thanks
Just HDMI -> Micro HDMI
Thanks for sharing. Tried on my M100 and it is work the clean HDMI. But after 2-3 minutes it stop "recording". I need to softly pressed the shutter to make it on again. Is it commond problem? My M100 firmware is Ver.1.0.1, I am afraid this is the root couse of the problem.
Incredible tutorial friend! Everything works great, other than my camera being distorted... Anyone have any suggestions/solutions for this? I can rescale in OBS but would like to know why this is happening :) thank you so much!
Thank you for this.
This is great video
You dont get black bars at up and down or the sides of the video output? i need full FHD out without any black bars.
Hello. I am going to buy this camera used and wanted to make sure the HDMI output is 1080p 60fps.
Thank you!!
Does it work in OBS? Clean hdmi works as webcam or it just for recording videos?
Yes it work in OBS 👌🏻
you do really have a good job
does it affect the dummy battery to always turn on the m100 camera when streaming? I use the default camera battery for only 30 minutes, the camera turns on and then turns off and I have to press the button and it turns on again. I ask for a solution. Thank you
So instead of the Camlink, can you just use the micro HDMI connect directly? No software required on the computer?
no you need a camlink or something similar, there is a cheap alternative on amazon... the software depends on what you wanna do, for streaming obs, for calls skype...
Great content. have you tried using the Canon webcam software with your M100? I have M100 and want to use it as a webcam but I don't want to buy camlink.
hi thank you! i don't know the software, but according to the website the m100 is not yet supported. Maybe it will come with an update.
If you don't want to spend a lot of money on a Camlink, there are ten times cheaper alternatives on Amazon. I bought a cheap capture stick myself and would recommend it to others.
@@NOPROTV I follow the methods on your video to get clean HDMI and it is working like a charm. Thank for the informative content like this.
Thank you so much. Good work on the English!
Hello! Is it possible to use the Canon EOS M100 as a webcam? I'm not able to use it. Utility Webcam driver only for M50 and M200
yes it is, but you need something like the camlink or an other capture device to connect the Camera with the Computer
@@NOPROTV hai .. how if i used laptop that have hdmi port , can we use cable hdmi (on laptop) to micro hdmi (m100) .. so dont need camlink ?
@@NOPROTV ok its done for me. Finally work after i buy hdmi video capture. Thank you for the video. 👍
Wow this is great. This helps more a lot that other tutorial. But can you please help me hot to set up for streaming. what are the cables needed. I don't have hdmi cable that came in with the box. I think Its not really included in the box. Can you show me what are the things needed. Pleaseeeeee. Thank you so much.
Thank you also for making an effort to translate this video in English..
With this hack does autofocus work? How can I change frame rates?
Yes, all functions are still there. You can still change the frame rate in the camera menu.
Does your camera turn off after 30 minutes, too? I don't understand why... I turned the setting "Auto Power Off" off but it still shuts my camera down (Aperture is still open so the camera is not fully off). I get a Screen which looks like the TV Error with many colors xD
Thank you so much for the tutorial, and thanks again for doing it in english!!! ♥
I did all the steps, but I dont have a elgato cam link, Can I just use a cable, like a usb or hdmi
I dont know that it only works with one cable, but there are very cheap alternatives to the Elgato Camlink 👌
if you plan to use it as a camera again, is it still possible?
Yes it's possible. just take another memory card or turn the camera on in the normal way.
Thank you so much for explaining this!