Bushcraft Chair 3.0 / A Victorinox Venture Project
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- How to craft a bushcraft chair with a conventional design with four leg and a backrest. The only tools i need is a Victorinox Venture, A Victorinox Swiss Army Knife and a 16mm flatdrill.
👉 flat drill set (mm): www.galaxus.ch...
👉 Victorinox Venture: www.victorinox....
👉 Links for my books, Swiss Army Knives and equipment below
👇👇👇
🇩🇪 🇦🇹 🇨🇭 Mein Amazon Shop: www.amazon.de/... 🇺🇸 My Amazon Shop: www.amazon.com... 🇬🇧 My Amazon Shop: www.amazon.co.....
➡️ Instagram: / feliximmler
➡️ Facebook: / felix.immler
➡️ Website: feliximmler.ch
I get lots of questions about why a flat drill was included with this knife. Now I can point them to this video. 😀
Super... i will give you more ideas what the flat drill is good for...
My Grandfather made that chair design for porch chairs; he used bailing twine for the seats without the center support. He used a weaving pattern using the twine on the chair seats and skinned the bark off the wood. He made some sort of stain too, that was brown to coat the whole chair. He used green locus wood and those chairs lasted as long as I can remember.🤔😅😂 Fun seeing your chair building project!
Thank you so much for this wonderful and interesting story!!!!
Hallo Felix. Du wirst von ja von vielen als "Victorinox-Gott" bezeichnet... und in deinen Videos beweist du das immer wieder. Der Sessel... wow... 👌👍Aber: lass mal deine Verbindungen spielen, damit Victorinox-Österreich die Venture in rot wieder bekommt!😉Du schuld bist, dass ich mir die verschiedensten Victorinox kaufe, seit ich deinen Kanal gesehen habe. Kann zwar nichts außer einen Pilz schnitzen, aber möchte das feine Stück zum PIlzesuchen und Angeln zweckentfremden. 😁 Mach weiter so tolle Videos! LG aus Österreich
Danke für Deinensuper netten Kommentar! Ich hoffe dass eine neue Serie Venture noch vor Weihnachten auf den Markt kommt. LG Felix
I'm a carpenter and I have to hand it to you, there is no end to your creativity. That is just awesome!
Wowww, thank you very much for this wonderful compliment!
THAT was **SPECTACULAR** !! From when you had all the bits and pieces cut and collected at the start of the video, it looks like the rest only took you a couple hours or more - and the finished project was very impressive! I'd even use such furniture in an apartment! Thanks for this, Felix! 😁
Bushcraft? That is such a fine chair that I am sure Grandma would like a set for her dining room. Ok, maybe not the dining room, but the front porch on the cabin for sure. What a fun project! Thanks for sharing this with us. When the apocalypse comes, I want to be neighbors with you!
For the first time I'm lost for words... So please take just my sincerest and hertfelt: WWOOOOWWWW !!! 🤩
Thank you very much for this wonderful compliment!
Herr Felix, I still remember that funny Viking chair you made from 3 planks. Now here you are making a full fledged chair. Amazing.
You are one of the three people I credit with my continued carrying of a Swiss Army Knife. I just bought myself and my son the Farmer X alox and it hasn't tackled any project like this yet but it has whittled a few small figurines that I make for Christmas gifts.
Thanks a lot for this wonderful words...
I've recently used the saw on my Hiker, they are super useful for so many bushcraft projects,,
Fantastic chair Felix,, thank you for showing us this one,, 👍👍🔪
Thanks a lot for watching!!!
Lieber Felix, an dir ist wirklich ein "Outdoor-Tischler" verloren gegangen! Einfach nur fabelhaft, was du uns alles zeigst, wie du es mit einfachsten Mitteln umsetzt und uns dabei vorführst, wie groß der Einsatzbereich von Victorinox-Messern ist! Vielen Dank dafür!👍👍👍
Ganz liebe Grüße aus Oberösterreich in die Schweiz und ein schönes Wochenende für Dich und Deine Familie!
Ih liebe Dich 😂
😘🥰😄😄😄@@FelixImmler
You could make the chair sturdier by using wedges to secure cross pieces in holes similar to how a wedge secures an axe head to its handle.
I want to fin out if the shrinking greenwood legs clemp the dry crossbars enough after two weeks..
@@FelixImmler -- A lot of old time chairmakers in Appalachia (my part of the world) use blind mortises when making chairs like this. The difference in moisture content really locks the joints and they don't need wedges.
Thats awesome i had the same idea😅😂
The orientation of the dry wood/green wood is important. As wood doesn’t grow perfectly round. The way you orient the shapes is critical to whether the joints will shrink tight.
Well, there you see. 😄 A workshop with tens of different machines is not always needed.🙄 IKEA now only needs to sell a manual for the chair model, then the customer has to get the raw materials themselves and a small tool set... 😂 I wish you Felix a nice weekend! 😄👍
😂😂 Thanks a lot for your fantastic idea!
Maybe call it Felistol
Your creativity never ceases to amaze me. Felix the Cat!
Thank you very much 😺
Was ein tolles Projekt!!
Die Idee das Taschenmesser mit den Schleifsteinen zu tauschen ist super!
Danke für das Lob!
Ei Gude Felix, *Wahnsinn!* 🤩👍🏻🤩 Immer wieder faszinierend was Du mit nur
zwei Victorinox und wenig Hilfsmittel hinbekommst. Bin begeistert!
Vielen Dank fürs zeigen, hab ein schönes Wochenende und feiere kräftig! LG Uwe
Vielen Dank lieber Uwe!
I have four chaires like this in my house, my great-grandfather made them in 1912!! They are still very sturdy!! I only repaired the seats in 1980, put some new gras/rope on, otherwise they are timeless 😍
Thanks a lot for your interesting comment!
I watch you with nothing less than stupidified awe, Felix!
Thank you very much for this compliment!
Hello 🤝. You made a cool chair out of branches. You have excellent woodworking skills
Thank you very much!
Na endlich mal wieder was anderes. 👍
Danke Friedrich!
Superb, makes a normal carpenter look silly with the simplicity
Thanks a lot for this compliment!!
Ein würdiger Thron für den Outdoorkönig. Gruß Karl.
Haa ha haaaa, vielen Dank lieber Karl!
Sensationell - ich bin ja so was von beeindruckt! Danke Dir dafür!!
Vielen Dank!
Very nice beautiful great job ❤❤❤
Thank you very much!
Simply amazing. Next Felix builds a sofa, just kidding. Great work as always! Enjoy your family holiday 😊
Thank you very much!!
Impressive bushcrafting!
Thank you so much!!
Love your creativity always Felix! You are amazing! ☺
Wowww your comment makes me happy! Thank you!
Magnificent effort a lot of people with a workshop would be reluctant to take that on. Bravo!
Thank you very much!!
Nice chair. If I ever make one and ivite you to my house ... i'm not sure you should trust me when I say: Go ahead Felix, you cah seat on it, it's safe!
Great video...I was watching you measure distances with your pocket knife and just thought: the amount of crafting you have to do until you comfortably do that...must be quite a thing
Haaa ha haa, you pay attention to the details. A pocket knife with a large blade and a small blade folded out is exactly 20cm
❤ hello from British Columbia Canada 🇨🇦
Beautiful chair🎉🎪🎠🐐🌍
Thank you very much!
I can now understand how earley man was able to craft so many items. Thank you for the insight..
Great chair,this is a high upgrade then the tripod chair imho.
Well done,great knife
Hello Steve. Thank you very much!
Outstanding project. You really show how you can make anything just use your mind and some time.
Thank you very much for this wonderful compliment!
Dear Felix, thanks for this awesome video. I wish you a great holiday with your family 😊
Thank you very much!
Fantastisches Projekt!! Werde ich bestimmt mit meinem Sohn nachbauen.
Danke für eine weitere Inspiration!!
Viel Erfolg und viel Spass!
Probably modern survival blade!
Thanks a lot my friend!
Very good video Felix.
Have a great weekend my friend.
JT
Thank you very much!!!
This is better than the chairs I have in my house! 😂 You’re a wizard, Felix!
Haa ha haa thanks a lot! 🤣
👋🔥✌️Hello, Felix. Thank's a lot 👍👍👍💪👌!!!
Thank you very much!
Ich sehe sie am liebsten mit Taschenmesser
Vielen Dank für das Feedback!
Felix I stand and tip me hat to you Sir!.....ATB
Thanks a lot for this wonderful compliment!
So gut geworden. Auch dass die Rückenlehne ein bisschen schräg ist, weil die lange Hölzer perfekt ausgesucht sind. Bin immer wieder beeindruckt wie leicht das bei dir aussieht wenn man das Video auf 10 facher Geschwindigkeit laufen lässt.
Mit dem roten Taschenmesser zusammen sieht der Gürtel sooo schön aus. 😍
Danke für dieses tolle Feedback!
Very cool project, Felix! 👍 The chair looks relatively comfy. LG
Thank you very much!!
Hope you have a wonderful time with family. Best wishes from Ireland 🇮🇪 to you and your family and subscriber's
Thank you very much!!!
Wonderful video, Felix! I always enjoy and look forward to watching your channel.
Thank you very much!
"Hello TH-cam" brightens up the start to my weekend every time. you make it look so easy 😀
Thank you very much!
Felices vacaciones Felix
Thank you!!
Outstanding job Felix!
Thank you very much!
Gran trabajo Félix 1👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽, da gusto ver tus proyectos
Gracias!!
Nice dam job on making the chair !! Pretty Cool!! 🇺🇸🇺🇸🪓🔪👍👍
Thank you very much!!
Dear Felix,
the chair and the timelapse-video how and while you made it, is simply great.
Thank you for another masterpiece that you did create by using a Victorinox-knife, a good idea you did focus on and a lot of your personal talent and effort.
Best regards from the "Jadebusen"
René
Dear René. Your comment makes me happy and motivate me to make more videos! Thank you!
Wow, great project 👍
Thanks a lot!
That is very good Felix and looks like hard work well done
Yes... to make over 20 holes was in deed hard work 😊
This was an awesome project, Felix! Well done!
As always, Félix, an amazing video. Cool. 👍😉
Thank you very much!
Enjoy your holiday, it’s well deserved.
Thank you very much!!
Muy buenas 😉 el proyecto de la silla me a encantado 👌 a quedado muy guapa las herramientas funcionan de maravilla buen trabajo amigo mío 👍 que disfrutes de las vacaciones 🍻 saludos 🇪🇦
Muchas gracias por estos buenos comentarios!!!
Greetings Felix. Excellent chair and video! Thanks for the inspiration and knowledge.
Thanks a lot for watching my friend!
Schön gemacht..... bin mal gespannt wann Du die Blockhütte dazu baust😉🤣👍🏻🍀
Ja, das würde ich schon lange gerne. Das wäre ein Lebenstraum...
Hallo Felix, ein etwas aufwändiges Projekt, aber es hat sich definitiv gelohnt, denn der Stuhl sieht recht bequem aus! LG Micha
Danke Micha!
Hallo Felix.. wieder ein tolles Video. Vielleicht kannst Du den Stuhl als Bausatz Idee an IKEA verkaufen. 😊
Ein Übernachtungsvideo mit dem Venture Pro fände ich Klasse.
Liebe Grüße aus Bochum und viel Spaß im Urlaub..
Danke für deine Idee und danke für dein Kompliment!
Nicely done!
Thank you very much!!
Cheap folding chair from the garage alternative? Faster but lacks Felix's craftsmanship.
Great work with the Immler knife 🗡️ 👌
Thanks a lot!
Good effort mate
Thank you very much!!
Very nice great job 👍👍👍👍👍👍
Thanks a lot dear Mike!
Happy birthday to you Felix
Thank you very much!!
great project my friend
Thank you very much!
great movie again Felix. Be sure to look out for Ikea to recrute you for their special boreal furniture concept.
Who would have thought that one could make a proper chair in the woods by using Victorinix tools.
Hammer, ich Feier das Venture und deine Vidos
Herzlichen Dank!
👍🏼nice looking chair good work
Thank you very much!
Thanks for another interesting video. Your creativity seems to know no bounds! Have a good holiday with your family, we’ll see you when you get back. Les in UK 🇬🇧
Thank you so much!!!!!
Höchst beeindruckend lieber Felix! Bravo mein Freund! LG Sepp
Herzlichen Dank mein lieber Freund!
Brilliant - a lot of work, but classic result, worthy of any British Chair Bodger Felix. (Bodger in the old definition, not the slang new one !)
В ближайшем походе попробую сделать такой стул!👍
Sorry... i don't understand.
@@FelixImmler I will try to make this chair in next hike
Great looking chair!
👍very good job. Amicalement Daniel from France
Thank you very much!
Exelente trabajo,logrado con pocas herramientas.Muy bueno
Thank you very much!!
Thank you for your knowledge, friend. Greetings.
Thanks a lot for watching
Hey Felix was für ein toller Stuhl klasse gemacht das sieht bei dir immer alles so leicht aus 😂 tolle arbeit wie immer
Ich wünsche dir eine tolle Zeit mit deiner Familie und ich freue mich schon auf dein nächstes Video 👍👍👍
Vielen lieben Dank
😮 congratulations,awesome. Perfect job 👏🏻👏🏻
Thank you very much!
Super videó,good Skills,,,,👍✌️🤝
Thank you very much!
*editing the video* “What music do you think we should use on the overlay?”
~”Get the sexy chair music!”😂
Yes😀
nice, plus you can use the same idea to make more stuff.
absolutly... thanks a lot!!
@@FelixImmler If you leave a hole in the seat, you can use it as a crapper. Just make sure not to use poison vines.
That's a remarkable project, though I am unlikely to attempt it.
Thanks a lot for your comment!
awesome - as always
Thank you so much!
Schönes Projekt
Und einen schönen Urlaub!
Vielen Dank!
Sehr cooles Projekt Felix, du bist eben ein Meister deines Faches. Viele Grüße aus Thüringen auch von Rocco und bis ganz bald :)
Ich freue mich sehr über deinen Kommentar. Ich wünsche Euch ein schönes Restweekend!! Liebe Grüsse
Excelente video gracias
Thank you very much!
Very cool project Felix, thanks for sharing, God bless my friend !
Thank you very much dear Michael!
Wenn du so weiter machst, kann Ikea zu machen ;-)
🤣🤣🤣
Ganz tolles Projekt und (wie immer) super umgesetzt. Bei mir scheitert es schon daran, dass ich nicht senkrecht bohre, ganz zu schweigen davon, dass die Bohrungen in einer Flucht bzw. rechtwinklig zueinander sein müssen. Da hast Du schon begnadete Augen und Hände.
Gruß Tino
👍👍👍
Thank you very much!!
You can get a better chair with a tinny credit card, and faster 😂😂😂😂. It’s a joke. Nice work. Excellent. Congrats and thanks for sharing.
Gazie Gustavo!
for Halloween I'll have to use thorny vine for the seat and decorate it with poison ivy
Super idea!
Ja geil! Das freut mich, dass Du mal wieder ein Projekt machst. Ist super geworden. Wie lange hast du dafür gebraucht?
Viel Spaß im Urlaub!
LG aus Hessen
Mit filmen ein Tag...
Das ging fix!@@FelixImmler
Piękna robota.. 🪑
Holaaa Saludos
Wow oh yes ! ! !
Was sehe ich da ganz am Anfang? Beide Klingen zugleich ausgeklappt? Regel Nr. 5 (hört sich schon wie Gibbs bei NCIS an): Immer nur ein Werkzeug auf einmal aufklappen. Sorry, heute kein Schnitzdiplom für Felix 😁
Ja... grauenhaft durchgrasselt! :-D
Excellent, as usual Felix!
I think I might have used a tip from an earlier video of yours - I'd have put in 3 or 4 hardened wooden nails into the log to stabilise the pieces while drilling. Any reason you didn't?
Thanks Felix.
One day when you have time could you do a video on the Hercules? I'd love to hear your opinion!
Thanks a lot for your idea with the wooden Nails. i want to know if it is enough if the legs shrink and hold the crossbars like this.
@@FelixImmler Yeah, Felix, I'm dying to hear how it works. The theory sounds fine. Good luck!
Servus mein Lieber, ich könnte 20 Stück für meinen Partykeller gebrauchen, wie schaut's aus...😂.
Schöne Vorstellung Felix, bei den Bohrungen spielt das Venture seine Vorteile aus.
Schöne Grüße, Marco
Ach bei 20 Stück würde ich eher zur Bohrmaschine greifen 😂.
@@FelixImmler 😂