I'm still new and learning the mechanics of these but that new Ghost steering you have is awesome....... I feel like there should be more things moving lol
Sweet video! Working on the ground is never fun but it's not impossible! You should do a video on adjusting your toe and camber, show how you do your measurements and what you like your bike to be like, that would be a cool video.
Oh man i have built a ton of Yamaha’s over the years! It doesn’t really matter you could follow how i did it start w removing everything in the subframe then engine then remove everything on the frame a arms/swinger etc!
Throttle cable getting hung up or mayb its time for a new one? I change my cables once a year w racing but you ride a lot as well! Open up the thumb lever and see how it looks in there Corroded mayb!
I didn’t know that cracked frames where that common that there not a concern I’ve always been scared of breaking a frame but your videos have kinda made me think there not that bad
Ive whacked a ton of trees w this quad some pretty bad so once you get one bad one it never seems to end! But they can be fixed and sections replaced so its still a solid platform!
ononewheel7 I tend to try and stay away from hitting tress it’s never the highlight of the day but thanks for letting me know that there fixable could save me some money one day
LOL John what happened to that ride? Are you healthy? I also see the seat was damaged! And that full rebuild that you do for 8 hours - not for the first time you are like a F1 service team, but you are all alone :)
@@ononewheel7 LOL couldn't drive like you! You are somewhere between crazy and amazing. Line is really thin. Great video actually and will wait for your new upload! This will be powerful video as I see what you do to the Quad !!!
Got same drills are bad ass good content and video chief keep it up
Thanks for watching!
I'm still new and learning the mechanics of these but that new Ghost steering you have is awesome....... I feel like there should be more things moving lol
Hahahaha wait till ya see the video when it happened!
@@ononewheel7 Was this when you went over the bars at that rock?
Oh ya!
I was at gazza on Sunday saw you guys in the woods and in the pit! Hope to see you out there again soon and watch you guys tear it up in the woods!
Nice was a fun day hoping to get out this weekend again!
That's friggen impressive!!!
Thanks man!
Thanks for watching!
Binge watching your videos right now lol. Very good content, as usual!!
Thanks man!
Hard working man great job on the swap
Needed to be ready for the weekend haha so it was double time here 🤣
Thanks for watching!
Just look out for those rocks 😂
🤷♂️
Great video keep them coming 🤘
Thanks for watching!
That was fast! I’ll be tearing my whole bike down for powder coating and upgrades this weekend.
Thats magic 🤷♂️
I saw you got a 2010x sweet ride man good luck with your build!
ononewheel7 thanks man! I can’t wait to tear into it, you definitely gave me a ton of motivation
I know how you were able to do it so quickly. 😌 you did it in time-lapse! 🤣😂
Great job bro.
mVm
Hey don’t share my secret haha
Thanks for watching!
Awesome video bro 🔥🔥🔥🔥
Thanks bud!
HAPPY BIRTHDAY BUD🤟😎👍
Thanks man!
Great video!! Keep it up !!
Thanks man!
damn ur a beast! this would take me weeks!!
Just gta get in there 🤣
Sweet video! Working on the ground is never fun but it's not impossible! You should do a video on adjusting your toe and camber, show how you do your measurements and what you like your bike to be like, that would be a cool video.
Thanks man and thanks for watching! I will try and do a video like that on the new quad once its done!
I need them skills. Nice job...
Thanks man!
Just get in there and learn its not too hard
dang dude that free floating steering should get should rid of 10,000% of vibration and shock . genius idea lmao
Amazing how good it felt that last stretch of trail i hit only problem was i was turning right but going straight 🤣🤣🤣🤣🤣🤣
@@ononewheel7 lmao
Honestly, good job! How do you remember what goes where and which bolts and screws go where? Impressive.
Thank you! I guess i know these machines pretty well i have built so many over the years!
Anyone knows how to get the vin engraved into a new frame to a Yamaha got all the paper work for the new frame but it comes without the vin
Not sure maybe check with your local dealer.
Where can I find a frame with pink slip for 2014 yfz450r
Right now theres not a whole lot available! You can get a new oem one but those dont come w a title!
Thank you.
Your making my back hurt just watching this lol.
Tuff workn on the floor 😫
Just under 8hrs on your knees and your only complaint is dirty pants lol. Now THERE IS a man who has spent a lot of time on his knees!! LMAO. 😂😂😂😂
After work during work my whole life 🤣🤣🤣
You are an animal my dude !
@ Raptor Dan thanks man i guess i know these yfz’s well haha!
How many swaps have u preformed whatsa good order to take when removing everything
Oh man i have built a ton of Yamaha’s over the years! It doesn’t really matter you could follow how i did it start w removing everything in the subframe then engine then remove everything on the frame a arms/swinger etc!
Did you do a parking break delete on this ? 👀
Yup all my quads i run the glann innovations caliper cooler/block off plate and delete the parking brake!
Cool vid bud
Thanks for watching dude!
Wish has raptor 250 plastic on a yfz 450 then be looking hell mean body with lots of descents mods with it then be he'll sweet to ride them
Hey man I'm having a problem with my raptor when I hit the gas the rpm hangs for like 5 seconds then drops any ideas?
Throttle cable getting hung up or mayb its time for a new one?
I change my cables once a year w racing but you ride a lot as well!
Open up the thumb lever and see how it looks in there
Corroded mayb!
@@ononewheel7 ok thank you I will go look now
I’m looking for a yfz450r complete rolling chassis?any chance you might know somebody that is selling a rolling chassis?im really looking for one
I have a friend in Maine actually who has one for sale!
Have a email or away to contact you I’m still looking for one?what is he asking for one.
My email os in the about you section!
Email is in the about me section!
Second
😎😎
How much is it for a frame, and does it come with a title John?
New oem is around 1300
I didn’t know that cracked frames where that common that there not a concern I’ve always been scared of breaking a frame but your videos have kinda made me think there not that bad
Ive whacked a ton of trees w this quad some pretty bad so once you get one bad one it never seems to end! But they can be fixed and sections replaced so its still a solid platform!
ononewheel7 I tend to try and stay away from hitting tress it’s never the highlight of the day but thanks for letting me know that there fixable could save me some money one day
Ya believe me i don’t try too haha seems like lately i hit one every ride now 😡
LOL John what happened to that ride? Are you healthy? I also see the seat was damaged! And that full rebuild that you do for 8 hours - not for the first time you are like a F1 service team, but you are all alone :)
Ride video will he up soon hopefully i am ok just some bruises haha more crashes lol! If you were on IG you would have seen a sneak peak haha!
@@ononewheel7 LOL couldn't drive like you! You are somewhere between crazy and amazing. Line is really thin. Great video actually and will wait for your new upload! This will be powerful video as I see what you do to the Quad !!!
Its gna be good gna work on it more today hoping its up tomorrow or saturday
I have 6hrs of footage to go threw 🤪
ononewheel7 Great to have a lot footage to choose from. It is a lot of work but most of the time catch a really great moments.
Tons of video
5 gopros and some drone shots
nice! 8 hours go for 7 hours whaaa xdxd
If i did it on my atv lift it may have been a little faster 🤣🤣🤣
@@ononewheel7 sorry made a joke, nice job men!!
All good buddy hahahaha 🤣
First :P
😎
new challenge .... how fast can ononewheel7 build a yamaha ?? hes at 8 hours . but i think he can shave off a few lmao
Hahahaha
If i did it on the lift it would have been faster not sure by how much but it would have been way easier working of that vs the floor haha!
@@ononewheel7 lol yes all the kneeling and bending over kills your back and knees also
867diesel oh ya!
Make play back speed 2😂😂😂😂😂😂😂😂😂😂😂😂
Slower??
This was about 8hrs total time lapsed!