Hi. Dennis Ranck, thank you for your video. This is your achievement installing a backup camera on your Toyota Tundra Truck. I bought mine back in 2003 but that time I didn't felt the backup camera important because backing up was not difficult in open spaces but in today's environment where everyone is in need of utilizing every bit of space. Let me come to the point, please provide the backup camera name or product information so, I could purchase one to install on my 2003 Tundra on the same spot where you have installed it. Your video is helpful for me and it will benefit me and many others if we have the product information. By the way you can add the product details in the description anytime you want, it is still not to late. Thanks
SallyBest® Waterproof Night Vision High Definition 420TVL Car Rear View Camera Universal Auto Parking Reverse Vehicle Backup Camera with 170 Degree V www.amazon.com/dp/B00VUSVM8U/ref=cm_sw_r_cp_apap_UwW6DMQAJyCR3 This is the camera I used. Remember, I did disassemble and rotate 360 degrees.
This is helpful video. Can you please add link of products in description of video. where did you bought camera, monitor and other things. So its easier to anybody to buy exactly what they need
Hey, nice video on the wiring, but do you have one showing how you installed the camera into the handle? This video doesn’t clearly show the camera, thanks, id like to see that type of camera you started with and how it looks inside that handle.....
I remove the handle with a 10 mm nut driver. Then I drilled a hole big enough to accommodate the camera that I did get from Amazon. The camera that I did get from Amazon, I did have to pull it apart and flip it 180.
Hi, am using a license plate camera for mine which should have less issues with vibration. My question is ; how do you run the wire into the cab? Do you drill ? Was thinking of routing through the slide down rear glass but it may keep rubbing and ruin the cable. Could you please give me a heads up on how you did yours.
I apologize. I do not check my TH-cam videos very often, I do not get a lot of comments. I simply ran the wire through a grommet in the floorboard and up underneath the threshold on the driver side. From there I ran the wires that were needed up underneath the dash and grounded to a nut that was right there. And I used that same area to run the wires to the monitor.
4.3 Inch LCD TFT Rearview Monitor screen for Car Backup Camera www.amazon.com/dp/B005CFLMNC/ref=cm_sw_r_cp_apap_QkEWNLkYpyul5 This is the monitor used.
Thanks for the video. I purchased a backup kit that came with a 20ft video cable. I needed about 25 ft to run the length of my truck from the license plate to the radio. I will use your method and install the male RCA connectors I just ordered from Amazon.
Very helpful for my 2000 tundra! Thx
Thanks thought it was a great placement idea until you brought up the tailgate slamming. Didn't even think of that thanks again
That's not a biggie.
thanks man this is a big help
Nice install. I'm going to try it on my '05. Please shut that dog up!
Hi. Dennis Ranck, thank you for your video. This is your achievement installing a backup camera on your Toyota Tundra Truck. I bought mine back in 2003 but that time I didn't felt the backup camera important because backing up was not difficult in open spaces but in today's environment where everyone is in need of utilizing every bit of space.
Let me come to the point, please provide the backup camera name or product information so, I could purchase one to install on my 2003 Tundra on the same spot where you have installed it. Your video is helpful for me and it will benefit me and many others if we have the product information. By the way you can add the product details in the description anytime you want, it is still not to late.
Thanks
Dior clarification, I used a uni bit to drill a large enough hole in the plastic of the handle.
SallyBest® Waterproof Night Vision High Definition 420TVL Car Rear View Camera Universal Auto Parking Reverse Vehicle Backup Camera with 170 Degree V www.amazon.com/dp/B00VUSVM8U/ref=cm_sw_r_cp_apap_UwW6DMQAJyCR3
This is the camera I used. Remember, I did disassemble and rotate 360 degrees.
niiice
This is helpful video. Can you please add link of products in description of video. where did you bought camera, monitor and other things. So its easier to anybody to buy exactly what they need
Sorry so late. Amazon.
Do I have to start smoking to install this?
when the tailgate closes the wire does not get pinched.
Hey, nice video on the wiring, but do you have one showing how you installed the camera into the handle? This video doesn’t clearly show the camera, thanks, id like to see that type of camera you started with and how it looks inside that handle.....
I remove the handle with a 10 mm nut driver. Then I drilled a hole big enough to accommodate the camera that I did get from Amazon. The camera that I did get from Amazon, I did have to pull it apart and flip it 180.
Hi, am using a license plate camera for mine which should have less issues with vibration. My question is ; how do you run the wire into the cab? Do you drill ? Was thinking of routing through the slide down rear glass but it may keep rubbing and ruin the cable. Could you please give me a heads up on how you did yours.
I apologize. I do not check my TH-cam videos very often, I do not get a lot of comments. I simply ran the wire through a grommet in the floorboard and up underneath the threshold on the driver side. From there I ran the wires that were needed up underneath the dash and grounded to a nut that was right there. And I used that same area to run the wires to the monitor.
dennis ranck thanks very much
4.3 Inch LCD TFT Rearview Monitor screen for Car Backup Camera www.amazon.com/dp/B005CFLMNC/ref=cm_sw_r_cp_apap_QkEWNLkYpyul5
This is the monitor used.
everything was purchased from the Amazon website.
Where did you get the camera
Sorry so late. Amazon.
Does it matter if the 18-4 wire is stranded or solid?
Typically, no.
Thanks for the video. I purchased a backup kit that came with a 20ft video cable. I needed about 25 ft to run the length of my truck from the license plate to the radio. I will use your method and install the male RCA connectors I just ordered from Amazon.
I am glad that I was able to help. That is why I make videos that I do.
damn, that dog is annoying...
Cujo in the background smh