MeDuino - Automatic Medicine Reminder. Arduino diy.

Hi it's ashraf minhaj back again with a simple but very effective Gadget. A Smart medicine box that will automatically remind you to take medicine in time.
Get the Code -ashrafminhajfb.blogspot.com/2...
Blogpost - ashrafminhajfb.blogspot.com/2...
Please Subscribe my channel / fusebatti
___________________________________
___________________________________
BackGround Music:
Lensko - Cetus [NCS Release]

[@jessicaadams8860]

My mother is over daily Medication. She is 86 and in good health. Our problem was getting her to take her pills at the right times. We bought a MedSked for our Mom. Great Product. Mom has been using it for 3 months and hasn't missed a pill .

[@abdulaualjony8299]

অনেক সুন্দর হইছে!

[@FuseBatti]

Thanks

[@mrkhalid8010]

❤❤❤

[@jannatmoury1703]

👍👍👍👍👍

[@ibody4592]

can you help me with the arduino uno please

[@elly1175]

what changes would i do if i'll use rtc? i'm new at these things and i don't really have a lot of knowledge about these. i was hoping if you could help me. thanks!!

[@FuseBatti]

1. Buy a RTC module
2. Use RTC library, these can extract time easily
3. Set the code,
If (rtc_time.now() == evening_med_time)
{
Do these;
}

[@elly1175]

@@FuseBatti do i need to buy an lcd for this?

[@FuseBatti]

@@elly1175 you don't need to. If you want to show the user which medicine to take then that would make a great project, but that's optional. You can make it fully functional without lcd. Buy RTC module (Real Time Clock module).
And... Subscribe if you like this channel, else a thumbs up will do. Thanks.

[@tarashah5076]

what are the changes to be made if i want to use different leds for different time say morning ,afternoon and night?

[@FuseBatti]

Use a RTC module. Real Time Clock. Then read the time, if(time == your time)
Trigger your alarm or light up leds.

[@tarashah5076]

@@FuseBatti thanks sir .

[@charminetaganile9384]

Say, if i want to use a sensor that would only turn off the alarm when the kit is opened. how should i circuit it? and what sensor should it be?

[@FuseBatti]

Just add a limit spdt switch. It will be off when the box is closed, if and till open it will start counting for the next period. That's it!
If you don't want to do this hard way, connect it to the reset pin.

[@mahinulislam6804]

Can i use arduino nano here? And what will be the changes if yes.

[@FuseBatti]

No changes required. You can use Nano.
Please subscribe my channel. Thanks.

[@sheru_the_don_]

Make a full video how to set all programs because i didn't understand please sir

[@anushabalaga7825]

Sir, what if we want to get the medicine names as well..and if the prescription changes and different time slots have to be made, do we need to write a different program again??..pls answer for this sir

[@FuseBatti]

For updating prescription you can actually use Bluetooth module with Arduino.
And Android app on a phone to update time and Arduino will alert on that time(s).
And for showing medicine name you can use lcd or oled screen.
Hope this helps.

[@anushabalaga7825]

@@FuseBatti thank you sir

[@tanjirulislamsami6225]

Cool!!!!!
Amder shate alwz box thake na.
Jdi box er shate kono ghori typ kicuk connect kora jay jeta shara khon carry kora possible tahole aro vlo hoito

[@FuseBatti]

ধন্যবাদ, এটা আমি মাথায় রাখব ব্র। বাট আসলে বুড়োদের সাথে ফোন কমই থাকে।

[@tanjirulislamsami6225]

Ami mobile boli nai...oder haate jdi ghori typ kicu rakha jay oita bolsi

[@FuseBatti]

@@tanjirulislamsami6225 Okay I'll try making one. Thank you

[@rumeysaaskn8141]

can i use breadboard instead of vero board?

[@FuseBatti]

Sure, you can.

[@earf8446]

can i use arduino uno here?
if yes can you tell me the changes

[@FuseBatti]

No changes needed. You can use.
please consider subscribing my channel.

[@earf8446]

@@FuseBatti Thanks you for your guidance I was thinking about making one for my grandmother

[@FuseBatti]

@@earf8446 Note that when will the next alarm be on depends on the delay. so if she presses the button 5mins later the next alarm will be on 5minutes after the delay. If you want actual time like 7.30 pm or something like that then use a rtc clock module.

[@earf8446]

@@FuseBatti I was thinking of using a rtc module. Thank you for replying.

[@FuseBatti]

@@earf8446 My pleasure.

[@frostywamne9186]

how did you give power to the arduino?

[@S1ynced]

+frosty wamne, go to 1:47 seconds idiot

[@frostywamne9186]

@@S1ynced +karthik naidu ,Actually i had rushed through sir's blog and not through his video at first so i didnt realise the source of power he used , later i did so it was my mistake , i should have checked it thorouhgly.

[@sheru_the_don_]

how to use code ????

[@Tokemon72]

I am sure you can set multiple timers for various medications.

[@FuseBatti]

Sure, a lot can be improved

[@Tokemon72]

@@FuseBatti I take different medications and needles for my type 1 diabetes. So, was just thinking out loud. Thank you for your response.

[@FuseBatti]

Hmmm. I was thinking to make a consumer-level version of this device too.
And of course, pleasure is all mine.

[@Tokemon72]

@@FuseBatti That be another cool idea and video if you were to go with your idea.

[@rezaphlvx2771]

duitan gocap kanggo PBO pa reza , punten sateacana

[@FuseBatti]

English please

[@user-qb4rb7od1s]

Whats the Lifespan of this battery when it is turned on 24 hours every day?

[@FuseBatti]

It's a low cost battery, to be honest it can last for some hours. But this can be expanded if you cut the LEDs of power bank module and Arduino.

[@sanb3586]

Can you help me with code ?

[@FuseBatti]

Sure, my code is link is in the video description. Anything else? Don't forget to subscribe my channel!!

[@sanb3586]

I am using Arduino Nano and ds3231 module I want code for that tu run
Example: turn on on Sunday at 12:30:00 and off at 1:30:00 and on Monday turn on at 1:30:00 and off at 2:00:00

[@FuseBatti]

@@sanb3586 Okay, thetes a library for ds3231i2c. use that. read the time as string. then compare it to your preferred time.
if (time == "12:30:00")
{ do things
}
Hope you got the point. Thanks.

[@sanb3586]

And what about day

[@sanb3586]

#include
int Relay = 4;
DS3231 rtc(SDA, SCL);
Time t;
const int OnHour = 12;
const int OnMin = 24;
const int OffHour = 12;
const int OffMin = 25;
void setup() {
Serial.begin(115200);
rtc.begin();
pinMode(Relay, OUTPUT);
digitalWrite(Relay, LOW);
}
void loop() {
t = rtc.getTime();
Serial.print(t.hour);
Serial.print(" hour(s), ");
Serial.print(t.min);
Serial.print(" minute(s)");
Serial.println(" ");
delay (1000);
if(t.hour == OnHour && t.min == OnMin){
digitalWrite(Relay,HIGH);
Serial.println("LIGHT ON");
}
else if(t.hour == OffHour && t.min == OffMin){
digitalWrite(Relay,LOW);
Serial.println("LIGHT OFF");
}
}

[@tanjirulislamsami6225]

👅

[@FuseBatti]

;)

[@tarashah5076]

please reply

[@FuseBatti]

I did. Thanks.

[@tarashah5076]

@@FuseBatti sir ,i want to ask you one more query related to this project.if i want your program and circuit only , then what changes i need to make in that in order to glow the led for three different times? i have used 3 leds , as per your guidance i made the connection and have defined the port as well. the problem is of delay that we need to put and also about the reset. what should i do so that after taking medicine i can stop the buzzer and blue led to glow (morning) and can glow red one for afternoon. ?

[@tarashah5076]

Sir,it will be a great help if you could reply at the earliest :)

[@FuseBatti]

@@tarashah5076 I'd recommend using a rtc clock module to get the accurate time instead of delay.
If you just want to use with delay it just counts you time then alerts.
So, delay (1000) means 1 second. Multiply hours and minutes with it the time you want it to buz or blink.
If you want three leds blink different way then connect to different pins. Nor just on one pin (make sure the are 1.5v led. Arduino only outputs 5v.)
Now, reset and delay_ just add functions like this instead of reset add another button to arduino.
void evening_med ()
{
buz/blink; //start buz and blink led.
if(digitalRead(button)) //pushed button
{
digitalWrite(buz,LOW); //set alarm off
digitalWrite(Led,LOW);
delay (the delay you want);
night_med (); //call /goto night schedule
}
}
void night_med()
{
Buz / blink;
if ()
{
stop alarm;
delay;
Call morning alarm;
}
}

[@hengamanga2562]

কড়া

[@FuseBatti]

Thank you Sir.