M012 My Almost Perfect DIY CNC Router
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2021
- About 17 years of evolution and this DIY CNC Router is almost perfect. Join me on this walk around where I explain why I changed from MACH 3 to Centroid Acorn for the controller. What changes I made on the machine over the years to make it much more flexible for the various applications I have for the router. See a one of a kind, automatic tool change system that uses a common 2.2kw collet type spindle. There is plenty to see and hopefully some good ideas can be had along the way.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Please visit the companion website for more information about these videos…
makingstuffwithchrisdehut.com/ - วิทยาศาสตร์และเทคโนโลยี
awesome,thank for showing us your cnc setup
My pleasure Gary. I will be doing some more CNC related videos soon. I have been so darn busy with my real job the last year I have fallen behind on my video production schedule.
Cheers!
Chris
I have a Mori Sl1h lathe I bought with a recent centroid oak conversion. The machine was functional but lacking a few small things. I negotiated to have hard buttons for feed hold and cycle start added before I would buy it. Rapid over ride I use through the wireless pendant and some through the touch screen. I will say anyone thinking about going to Centroid. Hard buttons for cycle start, feed hold, rapid over ride and touch screen make for a much more efficient and comfortable control. Thanks for the great video!
Thank you very much for the kind words and feedback! I agree with you suggestions as well regarding "physical" control buttons and touch screen.
Thank you for posting your summary video Chris. Very nice piece of mechanical, electrical and electronic Engineering.
Centroid has been doing CNC Machine Motion Control for 30+ years and is a family owned and operated business in Pennsylvania. More info on Centroid Acorn can be found on their website: www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
Thanks Marty, much appreciated.
I like that you clarified "expensive hobby", lol, which is an excellent tip for warming up the grease in the bearings by stepping the spindle speed.
Oh yeah, no hiding from the "expensive" part. Thanks for the comment!
Great video! thanks for posting.
Thanks CNC Keith
This was a very informative video. Your knowledge of the content and how you present it are top tier. Thank you for sharing.
Thank you very much for the kind words, I really appreciate that! Thanks also for taking time to watch the video!
Nice refined machine. I'm hoping I can do it right for my first build.
Great video, thank you for sharing
Thank you very much for watching and for the kind words!
Clean install, inspiring
Thanks for the kind words Eric, much appreciated!
Thanks!!
Very nice machine. Congratulations!! Are you planning to open source the machine?
Thank you very much for the comment. Regarding "open source" I am not sure. If I did open source it, what would you expect in the form of documentation etc?
I really like your video and much thanks for taking the time to create this. I'm in the process of upgrading my controls software to Acorn and would like to use your cabinet layout as a reference. This is my first time doing this and have some apprehension but I've done electrical work, low voltage mostly, and if I take my time and reach out when I need help I'm not worried.
I started my CNC adventure a few years ago to make parts for my 1940 Ford street rod and bought a 24"by36" CNC router then a 3D printer. Like you I'm not one to leave things alone and trying to make what I have better and along the way get a better idea of what I have and how it works.
One question, regarding the wiring in the enclosure. Are you using shielded wire for all your wire runs and if so what wire do you use?
Again thanks for the video.
Peter
Yes, shielded wires - I usually buy it from McMaster.com and look for "high flex" for any cables that have to move. It is pretty darn expensive compared to "ordinary cables" so be prepared.
Thanks!!
Do you remember where you bought the monitor keyboard support or the brand name? I've never seen one that adjusts as easily as yours appears to in the video.
Hi Greg,
I just checked on Amazon and it appears that it is not currently available. Here is a link though...
www.amazon.com/dp/B01CKHTA06?psc=1&ref=ppx_pop_dt_b_product_details
Cheers
Chris
will you share more info about the control board? I am in the process of setting mine up and not really sure which schematic to chose for the type of close loop controllers I have.
Thanks
Hi Goslownow,
I looked for the schematics this morning to see what I still have and found something that may help. They are not marked "Final" so I am not sure if they are or are not. You will have to use them only as a rough guide. Where do you want me to send them too, they are in PDF format.
Chris
Could you do a video on how you programed the plc logic for the stack lights in acorn software
Hi Slapcity, I currently am in the process of filming about 25 other stories that will hopefully wrap up around springtime. After that I will certainly give that a look and see what I can do.
@@MakingStuffwithChrisDeHut OK and thanks
The problem with a DIY CNC: It is never quite done.
The beauty of a DIY CNC: It's never quite done.
I love mine. Just wish I had more time to use it...
Thanks for the comments - you are right, whether I am using it as a tool or using it as an experimental platform to add features or improvements too it, it's all good fun!
If I understand correctly your ATC System is electro mechanic. It doesn't use pneumatics. Is that correct? If so, any plans or docs you could share? I could probably go thru your videos too. It'd just be nice to at least have a parts list to start in order to understand how it all comes together.
Hi south_american_cowboy,
The system does use pneumatics for :
Advance / retract of the spindle lock
Advance / retract of the tool magazine lock
When I designed and created that entire system, I had no idea if it would ultimately work so I never documented the process. Knowing what I know now and how much everyone is interested in it, I should have! THere are a number of videos about it on this channel that should give you a good idea of how it works and what is used in it.
Cheers!
Chris
That MPG motion! That's what I want.. I still love Mach3.. So there isn't any way, any pendant that can give me that? 😪
(using the wireless XHC HB04B right now)
I get it, that is just one of the reasons why I abandoned MACH software. Don't get me wrong, MACH is (was) amazing and Art did an incredible jobs creating it from the framework of another CNC software package.
But if all you ever experienced is MACH, then you don't know what "real", industrial level CNC is like. The Centroid Acorn package is pretty damn robust, ESPECIALLY when you take into account the price point.
Cheers!
Chris
@@MakingStuffwithChrisDeHut Thanks! 😀
Great! What is the model of Dell display?
This should be a link to the monitor I purchased from Amazon www.amazon.com/Dell-P2418HT-23-8-Touch-Monitor/dp/B07NQW9Y89/ref=sr_1_1?dchild=1&keywords=Dell+P2418HT+23.8%22+Touch+Monitor+-+1920X1080+LED-LIT%2C+Black&qid=1625174127&sr=8-1
If not, search for the following on Amazon
Dell P2418HT 23.8" Touch Monitor - 1920X1080 LED-LIT, Black
if we talk about high speed AC sindles there is no difference between air cooled and water cooled. it's a two variants of same thing.
the only difference is in operation. water cooled are much quieter and cleaner in operation.
i personally use an 2.2kW water cooled one (ER20). two pipes, bucket of coolant and a fish tank pump - that's all. it's really quiet.
That is great information, thanks for sharing!