Welcome back, Hi guys. Today I show about How to make mechanical system from plastic gear and DC motor. You can buy it via this link: goo.gl/yZ6RpY Thank you for watching!!
Really good! I appreciate the zoom in and the quality of the video. I was wondering, in the double layer gear with the 10T gear in the middle, what is the pressure angle of that gear? It looks like the pressure angle is not exactly the same as the the bigger wheel it's meshed to. It does spin well though. When you fitted the white single 14T gear, it looks like that gear has a pressure angle closer (or equal) to the bigger wheel it's meshed to. Or maybe they all have the same pressure angle and it's just the process of moulding the double layer gear that makes it looks like it's not the same pressure angle. Could somebody confirm?
Hey brother how you doing I was just doing some research because I have to make a small gear set just like yours for small electronics with a 12 volt motor small. I was just wondering how or where do you get those steel little bars that you put the gears on to to make those or can you purchase them please thank you?
What does this accomplished other than the Turning of a bunch of Wheels? I have a bunch of Gears I'm looking to make something useful with and I don't understand what you're doing here
I have no clue what he is trying to accomplish however if you put the power in from the other side it will make the last wheel super fast. I'm designing a similar design to try make one motor powerful enough to fire a ball at a target effectively.
Shows you how you can get a lot of torque out of a small motor by compounding gears and linking them in a 'geartrain' notice him putting pressure on the gears and not stopping the motor and how slow the last gear was turning compared to the first. Lots of uses here. One would be if you have a motor that has an RPM higher than you want and you want to slow it down without reducing the load you can add 1 or more larger gear till you achieve the disired RPM. Or if you have a small motor that is fast but weak in strength (torque) Then same thing applies ...add compounding gears that get larger as you and you will get a lot more torque out of your little motor
Revolution 1 to 50 from a waterwheel connected to a gear system to a big dynamo gives you a lot of free electricity , and it works on any flowing river , realistic ,functional mass energy solution 😀😀😀😀😀😉😯
Plāsṭikēra giẏāra kibhābē āmi saṅgraha karatē pāraba
I am suscribe
Thanks
Look strong
OMG! What a power is this enough to carry 2 kg load
Actually it doesn't have a lot of power. It just have very high torque.
Can you make gear shift
Ya gear kha sy milta ha ??
Aise gear kha milenge
Make it faster
Sorry, i did better when i was 12 and the Internet didn't exist.
And now you're here in the internet, seekong attention 🤢
@@schrodingersgunna6390 Who's seeking attention here? AAAahahaha
That's RICH!!!!
@@stclairstclair im sorry
Brilliant. Well except for the music but since nothing needs to be said it is easy to turn down the volume. Self explanatory in my opinion.
Thanks for your recommend
can you show a video to see how much torque those gear have!
It have lot of torque
How can I collect this plastic gear?
I bought from EBAY
ভাই আমি এই গেয়ার কি ভাবে সংগ্রহ করতে পারবো
Where i can find these rods of 2mm?
I need something like this. Is there an easy way to lower the sound level?
You can use metal gears with lubricants to reduce sound level
Bhai gear box kitne rupaye ke Hain
Really good! I appreciate the zoom in and the quality of the video. I was wondering, in the double layer gear with the 10T gear in the middle, what is the pressure angle of that gear? It looks like the pressure angle is not exactly the same as the the bigger wheel it's meshed to. It does spin well though. When you fitted the white single 14T gear, it looks like that gear has a pressure angle closer (or equal) to the bigger wheel it's meshed to. Or maybe they all have the same pressure angle and it's just the process of moulding the double layer gear that makes it looks like it's not the same pressure angle. Could somebody confirm?
hi
Where can I find those to buy? I think I need dual 1.5 inches one
I bought it from Ebay. Please visit this link goo.gl/yZ6RpY
Very good ideals of performance thanks for your support very good ideals
Loud annoying music with no explaining of what is going on regarding gear ratios, torque multiplication.
Hey brother how you doing I was just doing some research because I have to make a small gear set just like yours for small electronics with a 12 volt motor small. I was just wondering how or where do you get those steel little bars that you put the gears on to to make those or can you purchase them please thank you?
Brother, I bough those gear from Aliexpress. you can search by keyword plastic gear.
@@PowerCreative hey im talking about the steel rods
@@PowerCreative you dumbass need to train your own ASS reading comprehension. I also want tonknow where you can find those steel rods
Can you sketch gear of cavatelli maker plis?
Why so much high pitch music
I will improve for next video. Thanks for your feedback
no se porqué siempre ponen música tan pinche horrible
What does this accomplished other than the Turning of a bunch of Wheels? I have a bunch of Gears I'm looking to make something useful with and I don't understand what you're doing here
I have no clue what he is trying to accomplish however if you put the power in from the other side it will make the last wheel super fast. I'm designing a similar design to try make one motor powerful enough to fire a ball at a target effectively.
Shows you how you can get a lot of torque out of a small motor by compounding gears and linking them in a 'geartrain' notice him putting pressure on the gears and not stopping the motor and how slow the last gear was turning compared to the first. Lots of uses here. One would be if you have a motor that has an RPM higher than you want and you want to slow it down without reducing the load you can add 1 or more larger gear till you achieve the disired RPM.
Or if you have a small motor that is fast but weak in strength (torque)
Then same thing applies ...add compounding gears that get larger as you and you will get a lot more torque out of your little motor
fabulous
thank you
It made strong power but slowly. Thank you.
How can I buy these gears
Link in description.
❤good
Thanks
Great. Keep uploading
Thank you, I will
beautiful
What motor did you use?
24 volt brushed dc motor
Yeah Kitna weight Utha sakte hain
Bhai ye saman mere ko chahiye kitani price ha bhai
I need this types of gear , from where can I get it
Taobao
Ebay
It's available to purchase online
como axo a musica de fundo
Make a powerfull gear box with 12volt motor
Ya gayee kha milta ha
Look like toys
Ap ne ye gear kahan sa ly
Please btaye
👍👍👏👌
Revolution 1 to 50 from a waterwheel connected to a gear system to a big dynamo gives you a lot of free electricity , and it works on any flowing river , realistic ,functional mass energy solution 😀😀😀😀😀😉😯
😄🙂
ऐ गेर काहापे मिलेंगे
आप प्लिज प्लिज बताइऐना
How can I buy these gears in Pakistan
You can buy it on this link goo.gl/yZ6RpY
I have tried it but they said to me that we cannot send it PAKISTAN
Sad. I am sorry for can't help.
It’s ok
Bro search in Amazon gear toy kit and buy it
Where.live you