Hallo Stfan, ich habe eine Frage, ich fahre mit dem Fahrrad an einer Holzauffrischerfirma Kemp vorbei und ab und zu muss ein Innenholz verschwendet werden, einmal ist es eine Traktormarke Valtra und manchmal gibt es einen Mann-LKW, wenn sie wieder beschäftigt sind Holz werde ich das Video nach dir senden oder wenn ich kein Interesse daran habe
you all probably dont give a damn but does any of you know of a tool to get back into an instagram account?? I somehow lost my password. I would love any tricks you can give me
@Randall Beckett i really appreciate your reply. I found the site on google and im in the hacking process now. Seems to take a while so I will reply here later with my results.
How you doing stefan, I see the machine hop problems and the beginning , when the mechanic opens en checked, work good, thanks you for the vidio.. sal.des.new yorkc,
Greetings Stefan. I do think some people get machinery to try to do a little bit more than it is intended to do. I mean at 8.50 that trunk to my mind was a bit too much, for a start they could have cut the branch parts off a lot closer to the trunk. Personally I'm just surprised it didn't give up altogether or at the very least wreck the cutters. Good video all the same, - Stay Safe - Cheers Chris.
@@landtechnikmv-agriculturalvide Greetings Stefan. I see your point exactly, but their comes a time when you can push any machine over it's limit, - and that's when accidents happen, - if it's intended to take 9" trunks you can be hardly surprised if it breaks having pushed it to it's limit year after year. Like everything it wears out. - Cheers Chris.
In fact, it does exactly what the machine is built for. he could have turned the feed down a bit, but was probably too uncomfortable to put it politely. But the shredder regulates the feed independently if the counteracting forces are too great. And straight root wood and/or wet wood, as shown here is also more difficult to work with. But the feed was probably a bit too high. Edit: However, the loading can also be determined by the desired size of the wood chips. in conjunction with the hole pattern used to determine the size. The size of the cutter head (and thus the number of knives) can also be the limiting factor. Maybe that was just the way it worked.
@@Imholze - Agreed, - a touch less speed wouldn't have done any harm, (especially to the cutters). If you want a machine to last, you 'feed it', - as in this case the size of log/tree it was intended to take. If you continually push them above 'design size' something will break, - sooner, rather than later.
![Energieholz häckseln mit MAN und Jenz HEM 581 Aufbau, März 2019 [4K]](/img/n.gif)
Nice video Stefan!
Thank´s a lot Jan. Greets Stefan
Tach Stefan wieder geiles Video was der da so durch schiebt ist schon wahnsinn 🙈
Moin Paul, das stimmt, der muß das Maul ganz schön weit aufreißen. Greets Stefan
@@landtechnikmv-agriculturalvide jo so siehst aus 😅
Solche Videos sind auch immer interessant klasse Stefan Gruß Marko
Danke dir Marko. Greets Stefan
Moin Stefan coole Aufnahmen vom Holz schreddern solch ähnliches Gespann fährt hier auch bloss mit Lkw gruss
Moin Sven und vielen Dank. Greets Stefan
@@landtechnikmv-agriculturalvide Moin Stefan bitte schau mal bei Wood pimper die haben bei euch den Sitz gruss
Schöne Maschinen!
Vielen Dank. Greets Stefan
Hallo Stfan, ich habe eine Frage, ich fahre mit dem Fahrrad an einer Holzauffrischerfirma Kemp vorbei und ab und zu muss ein Innenholz verschwendet werden, einmal ist es eine Traktormarke Valtra und manchmal gibt es einen Mann-LKW, wenn sie wieder beschäftigt sind Holz werde ich das Video nach dir senden oder wenn ich kein Interesse daran habe
Danke, aber ich muß dir sagen, das ich kein Fremdmaterial verwende, aber du kannst es doch auf deinem Kanal hochladen.
Hallo Stefan 😁
Es war ein sehr schönes Video.👍🤗
War sehr Interessant.✊😄💪
Moin Christian, das fand ich auch, war auch das erste mal das ich das so filmen konnte. Greets Stefan
you all probably dont give a damn but does any of you know of a tool to get back into an instagram account??
I somehow lost my password. I would love any tricks you can give me
@Damian Preston Instablaster ;)
@Randall Beckett i really appreciate your reply. I found the site on google and im in the hacking process now.
Seems to take a while so I will reply here later with my results.
@Randall Beckett it did the trick and I now got access to my account again. Im so happy:D
Thanks so much you saved my account :D
Cooles Video Stefan! 🙋🏼♂️ Gruß Richard!
Moin Richard und Dankeschön. Greets Stefan
How you doing stefan, I see the machine hop problems and the beginning , when the mechanic opens en checked, work good, thanks you for the vidio..
sal.des.new yorkc,
Thank´s a lot Carlos, stay healthy. Greets Stefan
Very nice, Stefan. Must have been quite noisy, too!
Thank´s a lot Alan, that´s true but really interesting to see. Greets Stefan
Amazing video
Many thank´s William. Greets Stefan
Hallo Stefan,
Mal etwas anders! 📽
Die Jungs von Blunk! 👍
Schöne Grüße Marc!
Moin Marc, muß auch mal sein. Greets Stefan
Nice video
Thank´s a lot. Greets Stefan
Greetings Stefan. I do think some people get machinery to try to do a little bit more than it is intended to do. I mean at 8.50 that trunk to my mind was a bit too much, for a start they could have cut the branch parts off a lot closer to the trunk. Personally I'm just surprised it didn't give up altogether or at the very least wreck the cutters. Good video all the same, - Stay Safe - Cheers Chris.
Thank´s Chris, If you never push a work machine to its limit, you've probably bought too big. Greets Stefan
@@landtechnikmv-agriculturalvide Greetings Stefan. I see your point exactly, but their comes a time when you can push any machine over it's limit, - and that's when accidents happen, - if it's intended to take 9" trunks you can be hardly surprised if it breaks having pushed it to it's limit year after year. Like everything it wears out. - Cheers Chris.
In fact, it does exactly what the machine is built for. he could have turned the feed down a bit, but was probably too uncomfortable to put it politely. But the shredder regulates the feed independently if the counteracting forces are too great. And straight root wood and/or wet wood, as shown here is also more difficult to work with. But the feed was probably a bit too high.
Edit: However, the loading can also be determined by the desired size of the wood chips. in conjunction with the hole pattern used to determine the size. The size of the cutter head (and thus the number of knives) can also be the limiting factor. Maybe that was just the way it worked.
@@Imholze - Agreed, - a touch less speed wouldn't have done any harm, (especially to the cutters). If you want a machine to last, you 'feed it', - as in this case the size of log/tree it was intended to take. If you continually push them above 'design size' something will break, - sooner, rather than later.
Good video & excellent machine!
Many thank´s Ryan. Greets Stefan
Very good video Stefan.
Many thank´s Pavel. Greets Stefan
Profis fahren Eschlböck.....
Eschlböck sagt mir nicht mal was.
Der nimmt selbst die dicksten Dinger !
Na, wenn das nicht zweideutig ist ;)). Greets Stefan
Mit der Motorsäge bei der Fällung ein paar Schnitte mehr, und das ganze geht viel einfacher und schneller...
Da kann ich nix zu sagen, kenne mich nicht aus damit. Greets Stefan
Muy bien 👍😃 como siempre Stefan 👌
Muchas Gracias Juan. Greets Stefan
Nice video 👍🏻
Thank´s a lot. Greets Stefan
Echt sehr cooles Video 😁👍
Vielen Dank. Greets Stefan
Good video, greetings Johan
Many thank´s Johan. Greets Stefan
Very interesting!
Thank´s Tommy. Greets Stefan
Da bei dem einen Stamm war der gute Jenz wohl ein bisschen zu schwach!
Ist möglich, war ja auch nicht der größte seiner Art. Greets Stefan
@@landtechnikmv-agriculturalvide das stimmt. Ich kenne viele Jenz Hacker. Leider gehört mir da keiner.
das stell ich mir ja mega anstrengend vor eine Hem zu bedienen
Keine Ahnung, ich habs nur gefilmt und nicht bedient. Greets Stefan
Heeft er knap moeilijk mee
Bij de groten ja, verder ging het goed. Greets Stefan
不要晃
不知道你的意思。 Greets Stefan