Gotta love the harbor freight manual tire changer. I've had mine for at least 15 years, only broke it once at about week 3. I may fix it one day day but it still works fine. The little pin that holds the wheel at the lug hole is really weak.
Love the rims! They look like an old style factory rim off BMWs. I showed a picture of this car to my dad, who has owned several and is a big BMW fan. He straight up said, “They bastardized it...” 😂 I think you guys did great work!
I love how everything is over engineered with super detail & design (like how Ethan joins round tube with threads inside, then runs it back in the lathe to get a seamless join) Then on this episode there’s next level hackery with the windshield silicone🤦🏼♂️🤣 Absolutely love your work boys! By far the best channel on TH-cam!!!!!
If it's like my old E46, the hazard button is between the seats and will short it and turn it on if you happen to spill a drink on it - so it may have been the rain shorting the button. Happened to me on the freeway and had to drive home with my hazards on. Finally turned off one corner from home and a hair dryer to make sure it was completely dry again.
Heat the sikaflex up with a heat gun a little if you are trying to use a normal caulking gun..alternatively organize a sikaflex gun.great video guys....looks like fun
Negative camber in the front will fix your problem. Achieve this by putting one washer at the bottom of knuckle mounting point. Boom negative camber for five cents.
Big slabbed log drying in the garage, splitting mall leaned up! Love the background consideration 👍From one local to another, proud to see real life happening behind the scenes! Keep up the fun!
Hey guys he when you use that window urethane adhesive it makes it easier if you warm up the tube before you start squeezing it out onto the window stick it in some warm water sticking in front of the heater let it warm up to temperature
WOW@ the hail. That must have left some healthy dents in the car bodies. Only escape a covered garage. I lived in north central Idaho (McCall) 39 years ago, and that was the last time I saw hail like this.
I just love how these guys dont focus on CoSmEtIcS and mainly focus on functionality. Its awesome how far they have come, especially contrasting other DIY channels like themselves!! Great job broskis
The BUTE needs a nice set of offroad lights on the top bar afross the roof. Whether it be KC lights, a ligbt bar, or just safari style lights. Something. It would be awesomeeee.
I loved the old gray-yellow color scheme, the original build had. It looked like those old WW2 german Stuka dive bombers. (Fitting as its BMW). Still nice build!
Those harbor freight tire changers are a bang for the buck I modified the bead breaker with a piece of C steel in place of the two little straight pieces going to the piece that pushes the bead and it was a day and night difference you guys do great work love your channel 👍👍
I love this channel, it inspires me. Y’all show anyone can build something awesome. Keep up the sick work and I can’t wait to see what you guys will do to the 2j mower
I was an auto bodyman for years and when the pneumatic gun would die we would cut open the window glue tube and spread it all over and level it afterwards. It's a trade secret
LIKE WOW!!! Ethan saying lets take it easy a little Bit. 2 mins Later Full Send mode!!! Freaking UTE looks sweet all White. I seen on the Cars & Camera guys page where they ran into you guys at the Gambler.
we had similar hailstorm ten days ago here. crops are gone, fruit trees gone, wheat fields gone...screw cars, i've got nothing to sell from my farm :( everything is GONE !
@@ApocGuy that sounds like a stressful year. Half of my 22acres is underwater right now because of intense flooding, it's pretty stressful haha, just sitting here watching TH-cam trying to ignore everything being destroyed 😂
I like how you guys are ALWAYS using PPE, even when performing the most... improvisational "fabricobbling" skills. Ten fingers, ten toes, four limbs, two eyes, and proud! 😂
Colorado gets that kind of hail, and bigger, multiple times a year now it seems. I drive around a hailed out car because of it and have no real desire to have a nice car again until I move. Shit is crazy, but also pretty cool at the same time.
Who would’ve thought that I needed a Turbo Off Road E36 Truck 🤔. Keep thinking outside the box fellas, loving this content and the spooly bois sounds lol 🙌
Love your Ute. I also live in Idaho and I’ve had a e39 bmw that’s been chopped into a Ute/drift missile For a few years now. When I found your channel and was very excited to see another Ute. You guys inspire me to finish the junkyard ls swap
You should tune it so it doesn’t break up so bad when y’all are ripping on it, good fun when you can fully rip on it. Keep up the good work guys and Keep Grinding Hard!!
Two things you guys could use for the shop number one some type of tire Machine that is an upgrade from what you already have. Second you could definitely use a paint spray gun so that you can paint your projects. Instead of using rattle cans. You guys make some cool projects give them some good love with a nice paint job. Not saying you can’t do it with a rattle can but it would be nice to have wouldn’t it.
As an autoglass tech, that is most definitely not the way the pros do it but hey, as long as it doesn't leak and they didn't break the glass then ed did a good job lol
All of the things I dreamed of doing as a child, you turn into reality. Thank you guys for being so awesome and for being willing to take such risks. 🤟🏼🤙🏼
it's amazing even though they have lots of subscribers and cant message back everyone they still respond... many TH-camrs get so big they never respond at all...they forget its the subscribers for why the channel is big...!
Super guys 👌😍 Did you know the sand system to balance the wheels = On off-road they use some sort of soft sand in the tire to make an auto dynamic balance of the tire. So for a cheap tire montage in the future you can try it?
$2,000+Welder Giveaway and new merch here www.grindhardplumbingco.com/
Oh man this is going to be *EPIC!*
remove that edge on both of the front fenders. it really makes me nervous bcs it coul cut the wheel
You guys r the best
What did u do for tuning on e36
How’s the
Absolutely brilliant build! The speed limit sign front skid plate is an awesome touch! Keep doing what you do!
Gotta love the harbor freight manual tire changer. I've had mine for at least 15 years, only broke it once at about week 3. I may fix it one day day but it still works fine. The little pin that holds the wheel at the lug hole is really weak.
Love the rims! They look like an old style factory rim off BMWs. I showed a picture of this car to my dad, who has owned several and is a big BMW fan. He straight up said, “They bastardized it...” 😂 I think you guys did great work!
They are inspired by Lancia Delta Integrale wheels, hence the name. Nothing to do with old bmw wheels.
On a Wednesday! Best Wayne & Garth voice: “we’re not worthy.”
Haha we are trying for twice a week for the rest of summer!
@@GrindHardPlumbingCo thank you
WE SUCK
@@GrindHardPlumbingCo
I’m curious if you had stolen this idea from the *Doctor D.S.* TH-cam channel? He did the exact same thing with his beemer.
@@travelinman482 I’d say he copied us as we did ours years before
I love how everything is over engineered with super detail & design (like how Ethan joins round tube with threads inside, then runs it back in the lathe to get a seamless join) Then on this episode there’s next level hackery with the windshield silicone🤦🏼♂️🤣
Absolutely love your work boys! By far the best channel on TH-cam!!!!!
If it's like my old E46, the hazard button is between the seats and will short it and turn it on if you happen to spill a drink on it - so it may have been the rain shorting the button.
Happened to me on the freeway and had to drive home with my hazards on. Finally turned off one corner from home and a hair dryer to make sure it was completely dry again.
The notification that i need
Yewww!
Heat the sikaflex up with a heat gun a little if you are trying to use a normal caulking gun..alternatively organize a sikaflex gun.great video guys....looks like fun
She definitely gets down on a whole new level now. The added power and traction really made a huge difference, needs a longer track to run with!
WOW The turbo truck is finished!!!!!
Negative camber in the front will fix your problem. Achieve this by putting one washer at the bottom of knuckle mounting point. Boom negative camber for five cents.
Getting a mad max feel from the rim tire combo👌
Perfect! Exactly what we wanted!
@@GrindHardPlumbingCo then you nailed it!.
I was thinking back to the future. But I see it now. 😎
Big slabbed log drying in the garage, splitting mall leaned up! Love the background consideration 👍From one local to another, proud to see real life happening behind the scenes! Keep up the fun!
Love u guys. Trust me mount that tire changer. I used one for 3 years before I anchored it to concrete. Changed everything.
I like the moniker BM Double-Ute.
Hey guys he when you use that window urethane adhesive it makes it easier if you warm up the tube before you start squeezing it out onto the window stick it in some warm water sticking in front of the heater let it warm up to temperature
The rims for the Ute look like rally Subaru rims also if you put a lift kit on it you won’t have to cut the arches out
Great build guys and good job Dustin Hoffman for bringing a windscreen.
WOW@ the hail. That must have left some healthy dents in the car bodies. Only escape a covered garage. I lived in north central Idaho (McCall) 39 years ago, and that was the last time I saw hail like this.
I just love how these guys dont focus on CoSmEtIcS and mainly focus on functionality. Its awesome how far they have come, especially contrasting other DIY channels like themselves!! Great job broskis
The BUTE needs a nice set of offroad lights on the top bar afross the roof. Whether it be KC lights, a ligbt bar, or just safari style lights. Something. It would be awesomeeee.
That's why I always keep a blanket in my car for hail, go to the black hills in late summer for masive hail
Good call!
I loved the old gray-yellow color scheme, the original build had. It looked like those old WW2 german Stuka dive bombers. (Fitting as its BMW). Still nice build!
That wheel and tyre combination does indeed look amazing. Wowie.
Those harbor freight tire changers are a bang for the buck I modified the bead breaker with a piece of C steel in place of the two little straight pieces going to the piece that pushes the bead and it was a day and night difference you guys do great work love your channel 👍👍
We might have to try that out!
That speed limit sign skid plate is the most awesome use yet!
9:56 was sick!
I MISS MY E36!!!! I just ran skinnies with studs on the off road and winter time and she just gobbled up the rough stuff.
Had a buddy who put paddle tires on a 7 series BMW and made a sand buggy. Looks like you put a little more work into your car.
14:25 - that’s what she said
Good Luck Gambling, GHPCo Squad. We Proud
in general e36 are really good cars for everything you can build them for cheap,they can drift,really fun car
Your videos are the only thing that makes me wanna open TH-cam
I love this channel, it inspires me. Y’all show anyone can build something awesome. Keep up the sick work and I can’t wait to see what you guys will do to the 2j mower
Best use of a beemah eva !
Not really but i like it.
That might actually make it up my driveway in the winter.
I bet she could
Y'alls music is always on point. Kudos to Edwin!
The production quality of your videos is awesome and it keeps gettin better each time.
I'd love to see you guys on SEMA! would love to see colonel senders and BMW truck in person.
Nice mad max ride. Sweet! Thanks for sharing this one.
I was an auto bodyman for years and when the pneumatic gun would die we would cut open the window glue tube and spread it all over and level it afterwards. It's a trade secret
5:35: Ethan recording
6:55: when the camera man shows up 😎
Damn shots fired lol
LIKE WOW!!! Ethan saying lets take it easy a little Bit. 2 mins Later Full Send mode!!! Freaking UTE looks sweet all White. I seen on the Cars & Camera guys page where they ran into you guys at the Gambler.
Love the summer storms. I jave a pic of my vehicle outside temp over 100f and huge hail falling.
Sweet builds! Hail like that happens in Alberta quite often toonie sized
“Hailstorm alley” for a reason aha
Loonie toonie
Fantastic video Guys 👍. The BMW truck looks SICK 😜😜. That hail storm was wicked 😝
I've seen hail like this once in my life, I remember half the town having golf ball size bits of hail in their freezers. Crazy
we had similar hailstorm ten days ago here. crops are gone, fruit trees gone, wheat fields gone...screw cars, i've got nothing to sell from my farm :( everything is GONE !
@@ApocGuy that sounds like a stressful year. Half of my 22acres is underwater right now because of intense flooding, it's pretty stressful haha, just sitting here watching TH-cam trying to ignore everything being destroyed 😂
@@offgridas yeah, that's one way to look at that :D .
I'm liking the road sign sump guard. Been there, done that.
I cant wait to see the convertible being built! Love the rim an tire combo! Gave me hudge ideas.... thanks guys an keep building!
OMG guys! You need to get that Syncro under some sort of shelter 😱 Those vans are worth their weight in gold nowadays!
Looks like the BMW has “bucket” seats
Boys what you have here is a piece of art! Great job guys
Pro tip, heat your window sealant with a heat gun, comes out really nice!
I like how you guys are ALWAYS using PPE, even when performing the most... improvisational "fabricobbling" skills. Ten fingers, ten toes, four limbs, two eyes, and proud! 😂
Rims worth more than the car. I like it. I like it a lot.
Colorado gets that kind of hail, and bigger, multiple times a year now it seems. I drive around a hailed out car because of it and have no real desire to have a nice car again until I move. Shit is crazy, but also pretty cool at the same time.
Who would’ve thought that I needed a Turbo Off Road E36 Truck 🤔.
Keep thinking outside the box fellas, loving this content and the spooly bois sounds lol 🙌
That approach angle. Very nice
Love your Ute. I also live in Idaho and I’ve had a e39 bmw that’s been chopped into a Ute/drift missile For a few years now. When I found your channel and was very excited to see another Ute. You guys inspire me to finish the junkyard ls swap
The zip line FPV clip was sooooo 🔥🔥🔥🔥
Man you've got me excited for the next episode now. Your Gambler videos are what I look forward to the most every year!
So cool!! I know you guys were on a time crunch but the rockers and the roll bar need to be black!! The wheel and tire combo looks great on that rig!!
I am so bloody envious of you guys...you have the life! Keep it up, LOVE the videos!
You should tune it so it doesn’t break up so bad when y’all are ripping on it, good fun when you can fully rip on it. Keep up the good work guys and Keep Grinding Hard!!
ThT ute looks like even more fun now
from the humidity everything starts to brown and the car wiring starts to get stuck quickly the electronics will fail on rain nice done.. :D
Whoa. Dudes! A video on a Thursday morning. 2020 just keeps bringing it.
You should put some small bull bars on the front
It sounds really good without exhous system, that turbo whistles nice. Great job also to the body!
You guys have such an interesting mix between content and the b-roll/music. I mean it's amazing, don't get me wrong!
This channel is still very under rated.
Upgrades people! Upgrades!!
Two things you guys could use for the shop number one some type of tire Machine that is an upgrade from what you already have. Second you could definitely use a paint spray gun so that you can paint your projects. Instead of using rattle cans. You guys make some cool projects give them some good love with a nice paint job. Not saying you can’t do it with a rattle can but it would be nice to have wouldn’t it.
BMW race truck! Hell yeah love it!
hands down best film work!
I cant get enough.
Another great video guys.
Looks like a room addition to the house? Maybe a new video editing office? Can we hear more about that some day? BWM is looking hottttt!
Came for the builds, stayed for the slow mo weather footage 👍
Your guys videos are cinematic! Love watching them
When I was a kid it use to hail like that in the SoCal desert. But haven’t seen it in over 10 years now .
rally car dirt raceing wood be fun in that car
Those kanati mongrels are 10 ply i believe and should do well id think. Especially since modern utvs make serious power.
That’s crazy look at the size of those hails
Nice job guys the ute looks awesome!!Good luck at the Gambler!!
Great build guys!
As an autoglass tech, that is most definitely not the way the pros do it but hey, as long as it doesn't leak and they didn't break the glass then ed did a good job lol
All of the things I dreamed of doing as a child, you turn into reality. Thank you guys for being so awesome and for being willing to take such risks. 🤟🏼🤙🏼
Saw these wheels on the BMW monster car video. Im glad thats what they're for!
I love the speed limit skid plate
I love the skid plate
We got that hail all the way over here in northern Minnesota
it's amazing even though they have lots of subscribers and cant message back everyone they still respond... many TH-camrs get so big they never respond at all...they forget its the subscribers for why the channel is big...!
y’all be pumping out projects way faster than most youtubers it’s awesome af
Best teazer i seen on grind hard yet
The hazzard lights could possibly be a faulty crash control modual as well.
All of your builds are absolutely so sick, would love to do anything like you guys do someday.
Super guys 👌😍
Did you know the sand system to balance the wheels
= On off-road they use some sort of soft sand in the tire to make an auto dynamic balance of the tire.
So for a cheap tire montage in the future you can try it?
At some point you guys should paint the front end with the same gloss white paint so it’s all fresh bright white
Make sure to double clamp the pressure side of the intake😉
Love it!! Sorry, but I’m still waiting on the 1000cc power wheels Jeep! When’s it gonna be finished?
Whenever they get around to it. I’m guessing it’s been painted already, but the video might not be for a while
Sam: "I mean... it will work" is the motto of GrindHard hahah