Depend, you must to have a PLC with some output at train pulses ... for example, I have a machine with a PLC CP1E-NA and two oriental motors stepper (ARD-K) and this PLC have a four pulses output, 100.0, .1, .2 and 100.03. It work in Pulse+Dir. for the first motor (port #0) 100.0 for Pulses and 100.1 for Direction, for the second motor (port #1) 100.2 for Pulses and 100.3 for Direction. Check the PLC output before buy it, and the Omron assistance it's free ! Call they
I have CP1L M60DTD, but when i try to program same as expert do, the stepper cant rotate. What setting should i change in CX Programmer?
How to change velocity and position when motor is running?
You need to stop output cmd first to change velocity and position in Pls2 cmd
Which output of PLC? I don't see u show us the output of PLC to connect to the servo driver
th-cam.com/video/gzkaScmMiII/w-d-xo.html
@@Technocrats91 Thank you very much
How to get actual position?
thanks you so much
excuse me, can i get ladder diagram omron for motor stepper ?
Depend, you must to have a PLC with some output at train pulses ... for example, I have a machine with a PLC CP1E-NA and two oriental motors stepper (ARD-K) and this PLC have a four pulses output, 100.0, .1, .2 and 100.03. It work in Pulse+Dir. for the first motor (port #0) 100.0 for Pulses and 100.1 for Direction, for the second motor (port #1) 100.2 for Pulses and 100.3 for Direction.
Check the PLC output before buy it, and the Omron assistance it's free ! Call they
------------------------------------------------------------------------------------------------------------------------------------------
Program Sample At:
automationsolutions.tk/
automationsolutionz.blogspot.com/
Download Sample Section
------------------------------------------------------------------------------------------------------------------------------------------