ความคิดเห็น •

  • @mikejohn1202
    @mikejohn1202 5 ปีที่แล้ว +1

    As always, very informative and no doodling or trailing off to other things. Jeff, stays on point. Thanks!

  • @lieutenantglorp
    @lieutenantglorp 12 ปีที่แล้ว +2

    Another factor to consider is how a different brand kite or different size kite will react when released to flag line. Every manufacturer is different. Test the safety system in an area without consequences first. Don't wait until you need it!

  • @jeanvalgent7986
    @jeanvalgent7986 4 ปีที่แล้ว +1

    Also make sure you don't use a High split power line like the one on the North (around 6 meter high) with a low split (Naish ,Cabrinha, Best ,slingshot and airush).
    in other words all 4 lines bar are interchangeable except for the north.

  • @jdee4763
    @jdee4763 ปีที่แล้ว

    nice one Geoff Howard

  • @marktownsend8914
    @marktownsend8914 5 ปีที่แล้ว

    Thanks Jeff! Amazing helpfull video!!!
    So my OR Shitft2 bar should work fine with at AR 2019 WOW4 using the 20cm pigtails it came with correct?

  • @jessever3655
    @jessever3655 10 ปีที่แล้ว

    hello there, i have a question, i have a radsal 6.5m2 (4 line) with handels. I want to buy a peter lynn hornet 4 m with control bar. will this bar work on my radssail? and i want to buy a backstrap will that work on both kites with bar and handel?

  • @Ronagery
    @Ronagery 5 ปีที่แล้ว

    Hello Jeff and thanks for the video. I would like to know if my hyperlink bar from Ozone is compatible with a soul from Flysurfer ? Thx for your help. Ron

  • @tedbarton7449
    @tedbarton7449 4 ปีที่แล้ว

    Thank you. I have a 2017 Cabrinha 1x Trimlite control system. I have a 2011 & 2009 Switchblade kite. A Cabrinha chart says they are not compatible. They fly ok. Just a little soft, as you mentioned the angle. Any suggestions on adjusting the setup?

  • @SoL-cl1pw
    @SoL-cl1pw 6 ปีที่แล้ว

    Hi!
    I have a question I need answer to. I have a North trust bar 2018 with high Y I also have a Airush lithium 17 kite. Are the bar and the kite compatible? I have the pigtails but I not sure about the steering. Airush use low V bars and I have a high Y bar.
    I do have pigtails so i solved the line connecting.

  • @studdyts
    @studdyts 9 ปีที่แล้ว

    Could you mention a bit more on one bar and the safety cross over for other kites? I use one of the many Cabrina bars with IDS but Cabrinha suggest having exactly the right bar per kite. Im now looking at a North Dice and see lots of cheap Cabrinha bars with IDS which as a four equal line bar to kite option I would think was safe but is it safe? What safety system is most transferable? Thanks Tom in Cornwall UK

  • @stephaniepeplow8152
    @stephaniepeplow8152 11 ปีที่แล้ว +1

    Hi Geoff. What do you think about the switch element? thinking about getting a 11m as my first LEI, mainly kite buggy but am hoping to get into kitesurfing.

  • @franzjimeno8322
    @franzjimeno8322 2 ปีที่แล้ว

    If I have Starkite 2014 10m would it work with a cabrinha or slingshot bar?

  • @fnoronha2010
    @fnoronha2010 11 ปีที่แล้ว

    Hello!
    I have an 2005 16 m Cabrinha CO2 KITE WITH RECON GENERATION 2 CONTROL SYSTEM, and I use it in very low wind conditions, but the safety system is very obsolet...
    Do u think is it possible to upgrade the control system to a new CABRINHA IDS control system or any other new manufacturer 4 line system considering the pig tail adjustment modifications?

  • @alexsky7694
    @alexsky7694 6 ปีที่แล้ว

    Hey guys thanks for Info. Could you please advise how to add pigtails to F-One Middle lines, they have such a small knot there, I do not think it is safe to connect a loop from a thick pigtail cause it most likely will slip. Or are there any special pigtail for small knots like this?

    • @kiteboardingcom1
      @kiteboardingcom1 6 ปีที่แล้ว

      Hello, while we would never advise you to do something that you think is unsafe, we do believe that the pigtails here: kiteboarding.com/proddetail.asp?prod=pks2018_universal_pigtail_v2 will work fine for you application.

    • @alexsky7694
      @alexsky7694 6 ปีที่แล้ว

      Thank you. But link leads to page saying no product available =(

    • @kiteboardingcom1
      @kiteboardingcom1 6 ปีที่แล้ว

      I am not sure why you are seeing that. But they are in stock and ready to ship.

  • @shithead73458
    @shithead73458 9 ปีที่แล้ว

    Geoff so money! @stephanie I have owned 2 elements V1, they have made improvements to v2 and v3. not bad for the price. a little short on the wind range compared to some kites, losses some responsiveness when depowered, not as smooth as many kites, and not particularly beginner friendly at the top of it's wind range or in gusty conditions, imho. on the up side, great price, reasonable workmanship and durability, cheap and available spare parts, lots of pop, and good on the surfboard, drifts as well as my Ben Wilson.

  • @24tatan
    @24tatan 8 ปีที่แล้ว

    Hello I have Cabrinha kite 10 mt bar 18mt line the question is I recently buy the best nemesis hp v3 2012 whit no bar if I add 2 mt extencion line in the nemesis kite I can't use cabrina control bar? And where can I find leader line set 7/64 for cabrinha kite 2009
    If some one help me plz thank

    • @kiteboardingcom1
      @kiteboardingcom1 8 ปีที่แล้ว

      +Sebastian Castro Hi Sebastian, we are happy to help you with a set of lines or extensions. The best way for us to help you would be for you to email: support@fixmykite.com
      FixMyKite is our sister company we partner with for many repairs and line accessories. Thanks for your inquiry.

  • @sowshulmedia9482
    @sowshulmedia9482 8 ปีที่แล้ว +1

    Excellent advice for us noobs...thanks!

    • @kiteboardingcom1
      @kiteboardingcom1 8 ปีที่แล้ว

      +Sowshul Media You're welcome & glad we could help. if you ever have specific questions you'd like to see a video on, let us know, Jeff is happy to provide explanation.

  • @ricsweet
    @ricsweet 12 ปีที่แล้ว

    what if the bar has pulleys for 2:1 and 1:1?