Excellent video. To get around breaking the glass when you are trying to get the tube into the bottle. My suggestions: Stop the copper tubing a few inches from the hole in the bottle and run clear plastic tubing from the copper tube into the bottle. Not sure what size clear tubing you would use but you should match it up in the store when you purchase it. To make the seal water tight coming out of the copper pipe you should probable use a silicone based product. . Also a dremel drill with a glass grinding bit to adjust the hole. Also you can use a rubber grommet on the glass to protect it.
@@tandiparent1949 ..I dont really have a youtube channel dealing with this type of thing...I worked doing glass work for awhile and other jobs that had me using tools and just know how I would do it..Thanks for reading my ideas...It should conceptually work..Or not..:-)
You could also make a bottle mold for coiling tubing...fill same size bottle with Quik-crete or something. If outer glass breaks, you still have the bottle shape to wrap it around, just allow for glass thickness or pad the cement bottle before coiling. 😀👍🏼
an alternative to making the hole in the wine bottle bigger might be to pre bend the copper tube to the preferred angle then slide it into place. will probably give the same effect plus less drilling the glass/less risk of breaking it
So COOL! Great for an outside patio bar! I want one- though it looks hard to make 😥! The only thing: I would use a proper wine glass if possible!? 🍷🍷🍷🍷Break the bottle? OOPS! Better go to Bev-MO and buy a case, finish drinking another... and another... and another...😁
Great video! One thing I've learned is to immediately rinse the bottle so the glass dust doesn't cake on the inside of the bottle. This is especially important it you are using a lighter colored or clear bottle.
Just ran a search for different projects and it wasn’t until the end that I noticed that you were from Santa Maria! Great project and you’re local... small world :) I’m from AG.
If you started cutting the hole with the correct technique in the first place you would have had a better angled cut than doing two different cuts. For other viewers, go research cutting holes in glass/tiles first before attempting this
Maybe use some red die to look like red wine . Very cool I'm starting on a larger version out side . Using a sump pump crock and a larger pump . Not sure of my deign yet but for and indoor or patio fountain that looks too cool I use a piece of pics pipe to bend mu tubing . Works great Thanks for your time in sharing your great idea
Doesn't work, not sure what copper he is using but my copper doesn't bend that easily. I wouldn't waste my time. If you want to get frustrated and keep breaking bottler have at it. Waste of time for me.
Video was detailed and informative. I plan to do project. Thanks for sharing.
Excellent video. To get around breaking the glass when you are trying to get the tube into the bottle. My suggestions: Stop the copper tubing a few inches from the hole in the bottle and run clear plastic tubing from the copper tube into the bottle. Not sure what size clear tubing you would use but you should match it up in the store when you purchase it. To make the seal water tight coming out of the copper pipe you should probable use a silicone based product. . Also a dremel drill with a glass grinding bit to adjust the hole. Also you can use a rubber grommet on the glass to protect it.
Lol, where's your page? I really like your ideas n would like to see how you do it 🙃
@@tandiparent1949 ..I dont really have a youtube channel dealing with this type of thing...I worked doing glass work for awhile and other jobs that had me using tools and just know how I would do it..Thanks for reading my ideas...It should conceptually work..Or not..:-)
Also recommend distilled water with your project to prevent calcium and lime build up.
This is superb idea of reusing a bottle.
You could also make a bottle mold for coiling tubing...fill same size bottle with Quik-crete or something. If outer glass breaks, you still have the bottle shape to wrap it around, just allow for glass thickness or pad the cement bottle before coiling. 😀👍🏼
an alternative to making the hole in the wine bottle bigger might be to pre bend the copper tube to the preferred angle then slide it into place. will probably give the same effect plus less drilling the glass/less risk of breaking it
So COOL! Great for an outside patio bar! I want one- though it looks hard to make 😥! The only thing: I would use a proper wine glass if possible!? 🍷🍷🍷🍷Break the bottle? OOPS! Better go to Bev-MO and buy a case, finish drinking another... and another... and another...😁
Great idea! And I think even I might be able to make one, too. I think you did a great job.
Great video! One thing I've learned is to immediately rinse the bottle so the glass dust doesn't cake on the inside of the bottle. This is especially important it you are using a lighter colored or clear bottle.
Great job!
Next time you could fill the copper tube with sand, no kinking, easier bending. Nice project though.
Just ran a search for different projects and it wasn’t until the end that I noticed that you were from Santa Maria! Great project and you’re local... small world :) I’m from AG.
Wow!!! GREAT JOB 👏👏👏
I would drill a hole in the bottom of the glass so it only gets so full and doesn't overflow... I think that would look cooler
could also dye the water red so it doesn't look like dirty pond water
@@ToleranceAzgalor ...that's what I was thinking about; do 2 of them...1 would be white wine and the other 1 would be red wine 🙃
You could have used a clear bottom wine glass and glue the led light under the wine glass.
lostsheep hendricks sksksl w przypadku braku możliwości zmiany ustawień przeglądarki będą w przypadku gdy nie ma
lostsheep hendricks Paweł cicho cicho cicho cicho bbb bum bum bum bum bum bum bum bum bum
lostsheep hendricks what you said is very good tip
😭 WHYYYY THIS ISNT SOLD ON AMAZON??!
I don't wanna make it!
I want to buy it 😍 NOW PLZ! 🤦🏽♀️
THIS IS AWESOME!
Can you use an outdoor fountain, of galvanized or wooden material for an alternative rustic cocktail beverage fountain?
Nice video
Cool video thanks
After you put LED. How is looks at night?
Good job!
you should be putting a little water on the surface to be glued water is needed for the bond believe it or not
and rinse the rocks lol!!
Achei lindo, mas complicado de fazer:(
Parabéns, campeão!
is the tubing 3-8 inside or outside diameter?
Bom meu guerreiro
SCARY.. l luv the wine bottle ideal but you terrified me throughout this project I really thought you were going to cut your hand open.
No need to be concerned. He is a professional
If you started cutting the hole with the correct technique in the first place you would have had a better angled cut than doing two different cuts. For other viewers, go research cutting holes in glass/tiles first before attempting this
Hello, would you be willing to sell and ship similar item?
Sure why Not! Did you want this style fountain?
+david brown yes, the wife would love it. Email details to algainey23@aol.com
+david brown would it be possible to drill a small hole in the glass, preventing it from filling up?
Lol, just found you n subscribed; but, you should show your 'technical difficulties'; people learn from the screw ups too🙃
😱
get a 4 inch pvc pipe
much easier with a beer can
🙃
Maybe use some red die to look like red wine . Very cool
I'm starting on a larger version out side . Using a sump pump crock and a larger pump . Not sure of my deign yet but for and indoor or patio fountain that looks too cool
I use a piece of pics pipe to bend mu tubing . Works great
Thanks for your time in sharing your great idea
PVC pipe to bend tubing . Sorry word predict sucks
Would you do it for me and sell it to me?
Doesn't work, not sure what copper he is using but my copper doesn't bend that easily. I wouldn't waste my time. If you want to get frustrated and keep breaking bottler have at it. Waste of time for me.