These kinds of videos drive me nuts. I have the tools and experience to do projects like this but my imagination sucks. I never would've thought of this. Great job man! I got online looking for reviews on different brands of part washer cabinets before buying one. Now I want to build one. I even have an extra power supply from upgrading my PC build. I think you just saved me $200. THANK YOU! Jerry was a nice touch. That cracked me up. Lol.
Te admiro y agradezco tus docencias y humildad y creatividad. Eres brillante e inspirador. Dios te diga Bendiciendo. Muchísimas gracias por tanto campeón.
Отличная работа! Вещь очень нужная. Я такую же себе сделал, правда из пластикового корыта и насос от станка для СОЖ. Пару советов. Сток из резервуара лучше сделать повыше, что бы был хороший отстой грязи. Выключатель лучше поставить вперёд и побольше, что бы можно ногой его выключать, а не грязными руками.
Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)
Very creative use of scrap tank. I was thinking of creating the same from used and discarded outdoor barbeque grills. Often these are of the correct height and size to convert to a parts washer, with a cabinet made from stainless steel. Your use of a fuel pump and PC power supply have given me more creative ideas, too. Thanks for sharing this video.
Svaka cast brat mozda i najkorisnija alatka za odmascivanje delova samo magnet dole ispod da skuplja opiljke da ne napuni filter i cepaj, pozdrav iz Leskovac drugare
I recently completed this project using a set of hand trucks as a stand to make mine more portable, low psi 12 volt fuel pump, an a computer power supply cord to power it. Works great but on mine a brush instead of the nozzle is a MUST or the splatter will cover you. Thank you for the inspiration and great money saving idea!
I noticed that you used a Parkside Performance 20v 150nm drill, so how did it hold up for 2 years since you bought it, is it robust and do you recommend it!?
Prices for mild steel have considerably raised lately. Currently it would be expensive to build all that. At the same time it looks like it all worth the trouble. I might be wrong, but try adding a 25l canister with fluid beneath the structure. Install 2 ball valves in a canister wall. 1 in a very bottom to remove heavy oil fractions and one in a top to remove light oil fractions. Suction is to install somewhere in a middle. That is of course if a pump can perform suction, as some of those can't. That will provide you cleaner fluid to wash with as fluid fractions tend to separate in layers. It is not necessary, but will grant you additional video and improve your part washer.
Kao i uvek, vrlo korisno i kvalitetno. Vidim da sve alatke farbas sa ovom bojom, pa me zanima ko je proizvodjac i jel otporna na nitro? Trazio sam pod bojom za alat, ali nista konkretno nisam nasao
Looks great...the only change I would have made is to plumb a filter into the pressure part of the system to filter out dirt and prolong the fluid and pump life.
![DIY - SandBlasting Cabinet [ FULL Process ]](http://i.ytimg.com/vi/cydrlW58yCE/mqdefault.jpg)
Excelente 👏👏👏👏👏👏👏👏👏👏👏👏👏
These kinds of videos drive me nuts. I have the tools and experience to do projects like this but my imagination sucks. I never would've thought of this. Great job man! I got online looking for reviews on different brands of part washer cabinets before buying one. Now I want to build one. I even have an extra power supply from upgrading my PC build. I think you just saved me $200. THANK YOU! Jerry was a nice touch. That cracked me up. Lol.
Very good addition the brush at the end !!!
The most inovative creator ever.... If only we have a million guys like you... Most of tools manufacturer will close their factory!
I love your videos, you're so clever! A PC power supply, drum and fuel pump and bam, parts cleaner. I need more!
Brilliant piece of kit for the garage.....nice one.
Te admiro y agradezco tus docencias y humildad y creatividad. Eres brillante e inspirador. Dios te diga Bendiciendo. Muchísimas gracias por tanto campeón.
Briljant idea, thanks, wanna build one myself, and yours is very nice
Absolutely amazing! You won yourself a new subscriber! 👍👍👍👍👍🌟🌟🌟🌟🌟
Za ovakve ideje sam bez komentara. Odličan kao i dosad.👌👍👍👍
Taman da ima gde da se tušira Jery.🤣🤣🤣
Отличная работа! Вещь очень нужная. Я такую же себе сделал, правда из пластикового корыта и насос от станка для СОЖ. Пару советов.
Сток из резервуара лучше сделать повыше, что бы был хороший отстой грязи.
Выключатель лучше поставить вперёд и побольше, что бы можно ногой его выключать, а не грязными руками.
Шаришь 👍
Very nice 👍🏼 I’d like it in my garage any day
Very good ideas for the quality of professional, the perfection. Tank you very much for the quality video.
i have to admit, that jerry part at the start was the funniest thing i' ve seen in a while, totally wasnt expecting it xD
Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)
Ты монстр самоделок. Класс.👍👌👏
Excellent. This goes to the top of my To-Do list. Thanks.
Man thats a quality parts washing machine 🙌🏻
Belle réalisation bravo à bientôt salut Jeannot 🛠😉
기술이 있으니까 아이디어만 있으면 못만드는게 없구나, 대단해 👍
With skills like yours you should market them excellent build ps I would buy one
nice, but a magnet to catch swarf would be good
Ingenious.. hats off to you sir
Prijatno si me iznenadio na kraju... mislio sam da je nešto beskorisno... i sad moram sebi da napravim jedan.... eeee... muko... :D
BRAVO!!!
Pozdrav da li si napravio ovakvu kadu i kakvu si pumpu koristio? pozdrav!
Your work loks more and more Professional!!!
Keep it up 🙂
Very creative use of scrap tank. I was thinking of creating the same from used and discarded outdoor barbeque grills. Often these are of the correct height and size to convert to a parts washer, with a cabinet made from stainless steel. Your use of a fuel pump and PC power supply have given me more creative ideas, too. Thanks for sharing this video.
Great video. excellent job. Thanks for sharing. Cheers
That's awesome - I am always looking for stuff I didn't know I needed, and this is one!!
Sensacional, parabéns!
Witam a ten wąz do wody zielony gdie mozna kupic ,pozdrawia. Dobra robota👍
Hello my friend very nice very very good 👍👍🙏🙏🙏🙏🙏
super ideja odličan alat, jesi li razmišljao o izradi ultrazvučne kadice, samo napred srećnooo
New subscriber!!🔥🔥🔥
The video I’ve been waiting for 👌🏽👌🏽👌🏽
Svaka cast brat mozda i najkorisnija alatka za odmascivanje delova samo magnet dole ispod da skuplja opiljke da ne napuni filter i cepaj, pozdrav iz Leskovac drugare
tu galères des fois ? ça parait tellement simple que ça énerve !! good work i love !!!
I had to give this a big 👍 Well done!
Stay safe, Joe Z
That is a really nice parts washer. Clever to use an old pc power supply. Can find those everywhere at almost no cost!! Im subscribing!!
Bravo maestro uvijek genijalno.Poz.
скоро зима !!!! будем ждать снегоуборочную машину в вашем исполнении:)
Very very good project...
I recently completed this project using a set of hand trucks as a stand to make mine more portable, low psi 12 volt fuel pump, an a computer power supply cord to power it. Works great but on mine a brush instead of the nozzle is a MUST or the splatter will cover you. Thank you for the inspiration and great money saving idea!
Bardzo dobra robota👌👍👏 super
So cool great video 👍
Awesome idea bro
Dobar uvod sa Jerry bravo.. i dobar proekt.. 👍
Super odcinek😀
Outstanding build
Hahhahah odlicna fora za miša. Svaka čast za montažu. Pozdrav
abonné 👍😉 super vidéo !
I noticed that you used a Parkside Performance 20v 150nm drill, so how did it hold up for 2 years since you bought it, is it robust and do you recommend it!?
Fajne pomysły i realizacja pozdrawiam
Woooow 😎❤️ Amazing work 😏
Good job !!!
Eres un maquina picha, un saludo desde sevilla 💪👍🏼
Доброго вечора, підкажіть будьласка який ви використовували насос?
fuel pump ford mondeo mk1 😀
Дякую за відповідь😊
😊😊👍👍 good job pechoo
Nice work. We featured this video in our homemade tools forum this week :)
Это просто гениально!
Hi man, i am from Brazil. And your job is very good. Like like like
Excelente idea, solo dos dudas
1) la bomba de donde la reutilizaste ?
2) que líquido ocupas para la limpieza ??
Saludos
I'm addicted...👍👍
Xaxaxaxaxaxaa,jerry was awesome :):):):):)
That’s super awesome 👏
Хорошая идея.
Prices for mild steel have considerably raised lately. Currently it would be expensive to build all that. At the same time it looks like it all worth the trouble. I might be wrong, but try adding a 25l canister with fluid beneath the structure. Install 2 ball valves in a canister wall. 1 in a very bottom to remove heavy oil fractions and one in a top to remove light oil fractions. Suction is to install somewhere in a middle. That is of course if a pump can perform suction, as some of those can't. That will provide you cleaner fluid to wash with as fluid fractions tend to separate in layers. It is not necessary, but will grant you additional video and improve your part washer.
Not if you go to a scrap yard or had some scrap pieces laying around .
Excelente trabajo!! Cómo Se llama el manguito verde?
Félicitation , bonne vidéo
Which liquid is best for cleaning greasey parts at cheap price
Kao i uvek, vrlo korisno i kvalitetno. Vidim da sve alatke farbas sa ovom bojom, pa me zanima ko je proizvodjac i jel otporna na nitro? Trazio sam pod bojom za alat, ali nista konkretno nisam nasao
Cool Efekt lak 3 u 1
@@peChoOO Hvala 👍
Looks great...the only change I would have made is to plumb a filter into the pressure part of the system to filter out dirt and prolong the fluid and pump life.
Petarda normalnie 🔥
what did you use for the hinges?
Лайк за мышь )))
Хорошо когда ролик называют как есть
Sprytne. Tylko mufki mogłeś zastosować takie przeznaczone do spawania.
de donde se consigue la bomba ? o que lo usa ?
thank you super video
Good luck brother 👍
What paint do you use
Thank youu..
i love your vids bro.
0:20 sec in, I liked and subbed cuz of that XD!
😁👨🏭
Koju si tečnost sipao za pranje
Pomysł i wykonanie super. Jakiej farby młotkowej używasz? Czy płyn w myjce z czasem nie rozpuści farby?
Number one my friend
Very nice, sir
sir whether the pump is safe for gasoline?
I think a fuel pump out of a car
SUPER !
Love it!!
what is kind of blue paint is that?
bravo majstore
Супер так держать
Hey I have the same black Parkside bl tools, they are great.
Koju si tekucinu koristio za taj cistac 😉
Excelent
Tnx👨🏭
Gitara pomysł :)
Jakiej firmy używasz wiertel i gwintowniki?
Mute, turned 2x speed and listen Bomfunk MC - Freestyler. That was awesome
Great job! Can I ask what type of paint you used; I like that hammered look finish.