Well done sir! The only thing is that now I need to find out the best DIY way to remove and restore actual rivets, which my staple gun has. But at least I know that from THEN on it's an easy fix. Also, those e-clips will come in handy if I need to do a mod when re-assembling! Thanks to you. By the way love your style- real, honest, confident and no bullshirt.
Just fixed mine that kept shooting 2 staples out. It had two problems, epoxy glue got stuck between the striker and the front cover, forced the striker away from cover and then it hit 2 staples. Other was the staple carrier, it has 2 pieces spot welded together and it broke apart. I carefully epoxied it back together. Long ago, I was gluing some FG cloth and the glue was not fully cured, so glue got stuck between the cover you took off, and the striker. It had been broke for more than 10 years.
Do you maybe have an advice what to do if your staple gun shoots 1-3 clips? Sometimes one 2 come out and 1 holds perfect and the other is upside down? I have no explanation for that....
Wow, that sounds strange. Could be the spring or flawed staples. I'd try a new lot of staples and go from there. Other than that, I'm not sure what else it could be. Good luck!
@@Bluelightbandit Just fixed mine that did that. Two problems, epoxy glue got stuck between the striker and the front cover, forced the striker to hit 2 staples. Other was the staple carrier, it has 2 pieces spot welded together and it broke apart. I carefully epoxied it back together. Another problem could be wrong width staples.
Not going to lie bud. I would probably still throw it away even while knowing how tp fix it. I dont have any of those clips. If i had to go to the hardware store to buy those clips then I would just go ahead and buy another gun.
Thumbs down. You failed to proceed with the rest. After removing the two e clips you conviently left out some crucial information about how it would fall apart.
Just for giggles, I went back and watched the part where I removed the clips and pins. I literally mentioned being careful not to let parts fly out. Maybe paying attention and being mechanically inclined just isn't your thing. But thanks for the 👎😊
Here's some free crucial information for you also. Retaining clips and pins (ironically) "retain" parts from moving freely. Therefore when you remove said "Retaining hardware", expect parts to be free. You're welcome 😊
Yeah I’m 15 so I watch your channel for this reason to I also have a target stand and use it to put my targets up and have a few that don’t work
That's awesome man, thank you so much!
i guess it's kind of off topic but does anybody know of a good site to stream newly released series online?
Well done sir! The only thing is that now I need to find out the best DIY way to remove and restore actual rivets, which my staple gun has. But at least I know that from THEN on it's an easy fix. Also, those e-clips will come in handy if I need to do a mod when re-assembling! Thanks to you. By the way love your style- real, honest, confident and no bullshirt.
You are my new hero! You helped a completely non-fix it girl, fix her staple gun. Thank you!
Glad it helped!
I just had my JT-21M unjammed and works like new.. cheers mate from downunder😀
Cheers brother! 😊🍻
good video. yeah its the same here. if it don't work, take it apart and see why. throwing things away is to easy.
Thank ya Eric!
Just fixed mine that kept shooting 2 staples out. It had two problems, epoxy glue got stuck between the striker and the front cover, forced the striker away from cover and then it hit 2 staples. Other was the staple carrier, it has 2 pieces spot welded together and it broke apart. I carefully epoxied it back together. Long ago, I was gluing some FG cloth and the glue was not fully cured, so glue got stuck between the cover you took off, and the striker. It had been broke for more than 10 years.
I made the mistake of letting parts go flying everywhere and now I have a brand new, almost completely disassembled stapler on my hands.....
Thank you, solved my problem in a jiffy :)
@@oliverapopovart8902 You're very much welcome :)
Would you know why my T50 handle will not press down on the staples? I took the front cover off and cant get it work right. Thanks for your help.
That's a symptom of a jammed staple somewhere binding it up. Sorry I can't be any more help.
Love your helpful videos
Thanks buddy!
Hello
boss can u make a video on Rapid 28 staple gun for cablers please.
Sorry bud, won't be able to do that.
Hi can i ask if They have a stapple reloader of guntacker in the store cause my guntacker pushing reloader is gone
To be honest, I don't remember seeing just that part. Sorry.
I didn't even know they go bad! I've been using the same staple gun for fourteen years and never had one problem. But yeah I'd probably tinker with it
This one in the video is pretty old and that was the only problem I've had with it. It's stapled more targets than I can count. Thanks man!
Do you maybe have an advice what to do if your staple gun shoots 1-3 clips? Sometimes one 2 come out and 1 holds perfect and the other is upside down? I have no explanation for that....
Wow, that sounds strange. Could be the spring or flawed staples. I'd try a new lot of staples and go from there. Other than that, I'm not sure what else it could be. Good luck!
@@Bluelightbandit Just fixed mine that did that. Two problems, epoxy glue got stuck between the striker and the front cover, forced the striker to hit 2 staples. Other was the staple carrier, it has 2 pieces spot welded together and it broke apart. I carefully epoxied it back together. Another problem could be wrong width staples.
Try using pliers to put. the E clips on - just squeeze them on
This lady thank you.
Just undo the nut and bolt in the rear and the staple carrier comes out the bottom.
I did exactly what you did and after i assembling the leaver is not
Moving loose up and fix back same problem. Don't know what to do now.
Without looking at it, it's hard to tell. Sounds like the handle isn't seated properly. Sorry for your troubles.
Realy good,,but show me how the trigger is made.
$25 will buy a 30. Pack of Budweiser at Walmart.🤓
Damn right! 🍺😊
I did it and it worked
😊👍🏼
Thank you thank you thank you!!!
You're so welcome!
Mine works as it should except it will not drive 1/4 inch staples completely into pine wood.
The staples may be too long for that. Maybe try shorter staples.
NOW TELL US HOW TO UNJAM A PLIER TYPE STAPLER , LIKE A PLIER 31
I wish I could bud.
Not going to lie bud. I would probably still throw it away even while knowing how tp fix it. I dont have any of those clips. If i had to go to the hardware store to buy those clips then I would just go ahead and buy another gun.
Then buy clips when you buy a new one
That's the difference between you and I, bud!
Thumbs down. You failed to proceed with the rest. After removing the two e clips you conviently left out some crucial information about how it would fall apart.
😂
Thanks Karen! 👍🏼🤣
Just for giggles, I went back and watched the part where I removed the clips and pins. I literally mentioned being careful not to let parts fly out. Maybe paying attention and being mechanically inclined just isn't your thing. But thanks for the 👎😊
Here's some free crucial information for you also. Retaining clips and pins (ironically) "retain" parts from moving freely. Therefore when you remove said "Retaining hardware", expect parts to be free. You're welcome 😊
It got me out of a jam. Lol
😁
Video me kich dikh hi ni rha
I still haven't received my contest prize yet ☹
Go MAGA and Made in USA!