It sounds like the issue with the shelly power meter displaying as text instead of a value on the Ulanzi TC001 likely stems from how the data is being processed or formatted within Home Assistant or Node-RED flow. If the power meter's value is being sent as a string rather than a numeric value, the Ulanzi TC001 might interpret it as text. To troubleshoot, check the Node-RED flow or Home Assistant configuration to ensure that the power meter data is being correctly formatted as a numeric value before it's sent to the Ulanzi TC001 via MQTT.
I do not know is there any other way to make it work than just re-flashing the device with awtrix. After you flash it there is no password at all in the authentication tab.
Thank you! Helped me a lot in the HA / MQTT Jungle.
You welcome. You can watch other videos about this device that I recorded. Also visit my website where you will find tutorials.
Super helpful video! Now I am totally pleased with the TC001 🙂
Thanks.
many thanks 👍👍👍👍 looking forward for more Homeassitant to Ulanzi Learning Videos
The last one left in fact and it will be about deploying n8n in Kubernetes (k3s) cluster.
I already figured out how to pickup weather from Home Assistant and display it onto Ulanzi TC001. I will upload tutorial on March 22nd 2024.
great video, helped me a lot!
Glad it helped!
Thank you best Video
Thanks. Sooner or later will add more, but need to find a time to record a good quality content about roles in ansible.
Thanks for the video
You welcome. There is a whole series about it. Tutorials are on my website.
Great ! How do you send a sensor value to awtrix ?
Thanks MQTT broker. Watch the whole series from the very beginning and you will see how to achieve this goal.
Unfortunately I have a problem with the output of my shelly power meter. Here it shows the shelly sensor as text and not as a sensor output value
It sounds like the issue with the shelly power meter displaying as text instead of a value on the Ulanzi TC001 likely stems from how the data is being processed or formatted within Home Assistant or Node-RED flow. If the power meter's value is being sent as a string rather than a numeric value, the Ulanzi TC001 might interpret it as text.
To troubleshoot, check the Node-RED flow or Home Assistant configuration to ensure that the power meter data is being correctly formatted as a numeric value before it's sent to the Ulanzi TC001 via MQTT.
how do i reset password auth awtrix light?
I do not know is there any other way to make it work than just re-flashing the device with awtrix. After you flash it there is no password at all in the authentication tab.