ฝัง
- เผยแพร่เมื่อ 3 พ.ค. 2024
- Tháo tung quạt JisuLife Pro1 S và lắp lại. Bạn có thể vệ sinh, bảo dưỡng và độ pin dung lượng cao hơn.
JisuLife Fan Pro1 S Teardown and reassemble. You can clean it, maintain and have higher capacity battery mod if you can.
#JisuLife #HandheldFan #Fan #Teardown
Very informative video. I’m planning to fix my jisulife pro 1 as it makes noise when being tilted. Hope the process is the same🥹🤞
Maybe the problem is in the bearings, Jisulife doesn't have any lubricant in the bearings. So I think the lifespan will not be high if it is a cheap bearing.
@@BXT_LAB is it repairable?
My friend told me that it might be just the fan blades hitting on the inner part of the fan
Do you think that by just adjusting the blades would fix the issue?
@@cdgarcia5969 Yes, of course it's due to the propeller hitting the inside. But the cause may be due to the bearings, or the rotor shaft being misaligned. It can be fixed if you know how.
@@BXT_LAB I’m curious, does the coil separate from the plastic that holds the machine?
@@cdgarcia5969 Oh, so yours has broken off the motor base. You can use super glue to reattach it, but be careful to keep it aligned and not stuck by the glue. I think it might be because you dropped it quite hard.
Anh ơi không hiểu sao con lăn rất dễ hỏng không biết có cách nào khắc phục không ạ?
Em mở ra xịt một ít RP7 vào xem sao. Còn nếu mà hỏng hẳn thì anh thấy con linh kiện lăn đấy giống trong chuột máy tính, nếu mà cùng package với size thì thử thay xem, phải có hàn hoặc thợ điện tử làm nhé.
@@BXT_LAB nó không hỏng hẳn anh ạ nó bị đơ đơ lâu lâu vẫn lăn được nhưng rất khó khăn ạ
@@tongtrieu4710 em kiếm cái bình xịt RP7 xịt vào đấy xem có đỡ không?
Can you do jisulife fa42
I ordered it and it on the way. Subscribe and wait for the video, thank you very much!
Can you make video for Jisulife Life9?
I haven't bought that one yet, but you can watch this video
th-cam.com/video/19z82oS3Ye4/w-d-xo.htmlsi=2wlBO0wxNLTHn8cu
I ordered recently same like this, but out from the box, its not working, u charge for 2hrs, same still not working, there's a knocking sound and fan was not working, any idea whats the problem with mine abd how to fix it?
It sounds bad that when it comes out of the box it doesn't work☹
I guess it was due to shipping damage or they had a problem with quality control.
Normally when the fan starts it also makes a knocking sound when the motor starts to rotate. That is the special sound of this Jisulife fan with this 3-phase motor.
The problem of it not rotating could be due to the speed control circuit or a problem with the motor. This requires opening it up to figure it out.
@@BXT_LAB yeah, the device was damage, i already consulted to customer service and they gave me a replacement, i have to wait again for a week to arrive.
I bought 3 of these Pro 1S. But one of them has a poorly balanced fan blade. When running below 30% speed, it vibrates a bit, so when placed on the table, the noise is a bit annoying. The rest is no problem.
I dropped mine into the water and now it can be opened but the motor keeps freezing. LED display is working fine but it seems battery makes it uncontrollable and the fan isn’t rotating. Any advice?
If you drop it in water, the electronic parts will fail first. There is no other way but you have to buy another one.
@@BXT_LAB thats what i think. Thx so much!
Hey the yellow wire of my motor got cut off from the motor but still connected to the wire, where do i reconnect it to get it working again?
You must find the start of copper winding and resoldering it. It is 3 Phase BLDC motor, so it has 3 wire red, black and yellow connected to three ends of the copper windings.
Can you send me a pic of yours? I cant seem to figure it out
Or is there a replacement i could order or do i need to rewind the motor myself?
@@enzzy6880 You dont need to rewind the motor, but you just only find the copper end of one phase and solder it to the wire which is it broke from.
hey, the board of my fan burnt a bit, what should i do?
If there are no replacement parts, your only option is to buy a new one.
mình cũng có ngồi tháo con này ra, cạy cái ở sau xước hết :v
@SMedia74 Bạn cậy bằng bằng cái tool nó mỏng nhưng phải đủ cứng ý, chọc đúng vào khe lậy đều là được.
Can you do orashare hf03 also
Sorry, but i don’t have one.
how to open the fan without tweezer?
You just need a tool that's flat and hard enough, maybe a blade or something from a nail clipper set.
make video Jisu ultra 1
I’m thinking about it😂
Em gỡ ra rồi lắp vào quạt không chạy luôn sao anh làm hay vậy
Sao hơi đen thế bạn? Có thể do bạn chạm mạch chỗ nào đấy khiến IC chết hoặc cái dây ở motor bị đứt. Màn hình còn hiển thị không bạn?
battery lithium ?
Yes, it’s two cells Li-ion 18650 in series. (7.4V 2500mAh) equal 3.7V 5000mAh.
Mình xin thông tin pin đc ko b
Pin 2S 7.4V 2500mAh, cell 18650 nhé bạn.
Nếu mà nâng cấp lên cell 3000-3400mAh thì ngon luôn😄
is there a way to fix it when the fan is no longer rotating/working?
You need to know which component is damaged? And how to fix or replace it.
@@BXT_LAB i teardown my fan the way you did and saw that the wiring on the fan was broken/cut off. hoe do i fix that?
@@eulahrisse You can resoldering it if you know exactly which wire it broken from. Or you can go see an electronics technician (some one who understands electronics and has soldering equipment).