2 Ways to Adjust Z-Height on a CNC Table - Kevin Caron
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- #Metalworking #MetalFabrication #MetalFab #CNCCutting #CNCTable #KevinCaronArt
From www.kevincaron.com - Artist Kevin Caron explains how to adjust the height of a CNC metal cutting table's nozzle, both on the computer and on the fly ....
Kevin Caron had a question from a gentleman who was using a CNC plasma cutter table: How do you set the Z-height, which the distance from the work surface to the torch? How do you adjust that gap?
The first thing Kevin Caron did was check his CNC table's plasma cutter manual to find the settings they recommend. That sent him to the Hypertherm manual, where there are a bunch of charts. These charts are set up in millimeters and in inches. The column you're interested in is the "Torch to Work Distance" column. Using the inches chart, Kevin Caron shows that the manual indicates that you set the height to 0.06 for 1/8" stainless steel, which is perfect for this example.
But what do you do with that information?
Kevin Caron opens the Sheetcam software, which helps him tell the CNC table what to do. He shows how to go to the Tool section - this is where you put the parameters that you found in your instruction book. He clicks on "1/8" stainless steel" and selects "Edit."
Another window pops open that shows the settings for that particular tool. Kevin Caron shows how to edit the Cut Height, which is the same as the Z-height. The software shows a diagram on the right indicating what you are setting. Now the next time he wants to cut 1/8" stainless steel, the Cut Height will be already set at 0.06.
You can also adjust the Z-height, though, right at the CNC table controls.
To show you how, Kevin Caron goes out to his studio, where his CNC plasma cutting table is. He shows the program that he uses to control the plasma table, which is made by Dynatorch. He zeroes in on the Set Point control, which is set at 127. If you want to raise the torch head, you can click it up to, say, 130, which would pick up the torch a little bit. If you want to lower the torch head, you'd click that number down.
So that's how you adjust your Z-height "on the fly" while you're cutting. Maybe you're watching the tip and it looks like it's getting too close to the metal - maybe the metal is bowing up just a little bit from the heat. You can bump that number up to raise your torch, then lower it again once you get over that hump.
Or if it looks like you're not getting enough penetration - if it looks like it's not cutting all the way through - you can lower the tip a couple of clicks. These kinds of adjustments may help you save your cut.
Kevin Caron hopes that answers the question about adjusting Z-height. So now is a great time to click that "Subscribe" button and to visit www.kevincaron.com to see more how to videos and Kevin Caron's amazing sculpture.
Before you go, though, you might want to enjoy an unscripted - and very cold - story time with Uncle Kevin ...
"Inspired sculpture for public & private places."
Artist Kevin Caron has been sculpting full time since 2006. See - and hear - his amazing metal and large format 3D-printed sculptures, which are found in public and private places coast-to-coast and online at www.kevincaron.com.
Follow me for more fun and facts:
Facebook:
/ kevincaronstudios
Instagram: / kevincaronart
Twitter: / kevincaronart - แนวปฏิบัติและการใช้ชีวิต
Thank you! Just getting started in plasma cutting. Very helpful! Cheers!
Glad it helped!
Great job great info. You have helped a lot. Thanks Kevin.
You bet
As always useful information. Thanks, Kevin!
Thanks for watching John!
Great info.. thanks Kevin....
Any time!
It would be nice if someone would show kerf setting also..great video by the way..Thank you
Great suggestion!
Hi Kevin do you ever have to physically adjust the torch on the machine? How do you set that up for instance replacing the torch. Is there a process for that? Thanks
I have changed the consumables a couple of times but have not had to mess with the torch. It is just held on with a clamp and 2 magnets.
PLEASE what about Thc do you use it on this machine. thanks.
Yes I do use thc and it works very well.
Can I use a step up transformer to run a 220 volt welder . Full Box of breakers can run a sub panel have to upgrade at a high dollar cost.
Not sure on this one. Hate to give you bad advice.
Scarey story 👍👍👍👍
welders have to be really smart
Or at least really willing to learn on the fly!
Duh: Read the Instructions!!!
If it was only that easy. First you have to find it!
Fantastic Kevin, always good information, pussy, prosperity , health and money on you
Thank you for watching and posting.