Guys, awesome video, I am doing major maintenance on my X. One thing to add if anyne interested, I can upload a vid. You can get away (spanner wrench part) with a flathead screwdriver and a rubber mallot
How many miles were on This bike when the new bearings were needed. My bike only has 12,000 miles and I have the front end wobble at 40-50 mph ? Thanks so much
@@ItalianMetalHED Usually when you let go of the bars at about 35 mph you will get a shake in the front end. That "death wobble" is the tell tale sign that it's time to replace.
OK pretty good video however the locking nut on top of the stem nut does not get torqued as you did at time stamp 9:00 in this video, watch from time 8:53 you installed the stem nut, then the locking plate and the locknut and then torqued the entire assembly. It's the stem nut (the one that goes on first) that gets a preload I think it's 12-15 ft-lbs, then the lock plate drops on and hand tight the lock nut to align with the tabs. The upper triple tree nut will lock everything in place once torqued. That's according to manual and every tech I have ever talked to about this. PLEASE everyone doing this DO NOT TORQUE the lock nut.
This seems like a pretty extensive job I am concerned of how much this is going to cost me I'm within my 30 days should I return the bike [ handlebars shaking violently when I take my hands off]
Your handlebars aren't shaking from neck bearings. Check wheel balance. Air pressure. Wheel bearings. Tire condition. Many contributing factors. Unless you trailer your bike alot neck bearings last a long time.
Just got mine in the mail yesterday so I'll have plenty of time this winter to get them changed. Looks easy enough. Thanks!
Excellent video and found it just in time to change mine out. 07 vtx 1300c. Thanks for putting this together.
Guys, awesome video, I am doing major maintenance on my X. One thing to add if anyne interested, I can upload a vid. You can get away (spanner wrench part) with a flathead screwdriver and a rubber mallot
You can also buy a large socket. I have found that its actually to get the correct torque spec doing it this way. Good idea though.
Great video I learned a lot thaks
Ive read that folks are using different torque values on the main nut (12,15, 30) which do you use?
How many miles were on This bike when the new bearings were needed. My bike only has 12,000 miles and I have the front end wobble at 40-50 mph ? Thanks so much
That's about the time that I replaced the neck bearings on my bike.
@@GoheenCycles what is a symptom of them needing to be replaced?
@@ItalianMetalHED Usually when you let go of the bars at about 35 mph you will get a shake in the front end. That "death wobble" is the tell tale sign that it's time to replace.
Thank you...excellent video
OK pretty good video however the locking nut on top of the stem nut does not get torqued as you did at time stamp 9:00 in this video, watch from time 8:53 you installed the stem nut, then the locking plate and the locknut and then torqued the entire assembly. It's the stem nut (the one that goes on first) that gets a preload I think it's 12-15 ft-lbs, then the lock plate drops on and hand tight the lock nut to align with the tabs. The upper triple tree nut will lock everything in place once torqued. That's according to manual and every tech I have ever talked to about this. PLEASE everyone doing this DO NOT TORQUE the lock nut.
Safety 3rd! Clean cut though.
What size pipe did you use as a driver
What was the symptom?
I know this is an old video, but do you have the part number for the steering head bearing set? Thank you.
All ballz steering bearing
Roller bearing design instead of ball bearing
This seems like a pretty extensive job I am concerned of how much this is going to cost me I'm within my 30 days should I return the bike [ handlebars shaking violently when I take my hands off]
Your handlebars aren't shaking from neck bearings. Check wheel balance. Air pressure. Wheel bearings. Tire condition. Many contributing factors. Unless you trailer your bike alot neck bearings last a long time.
how many miles where on this bike?
RanGer498 I believe about 8k.
Goheen Cycles thxs
WHY DO YOU HAVE TO REMOVE THE TANK...SEEMS TO BE SET FAR ENOUGH BACK IS NOT IN THE WAY
+Dave Fe when I do them now, I don't remove the tank. I just cover it before I start.
No proper tools. No clean job.