Don’t forget to upgrade to thicker wires. I had my walbro 460/485 melt the two skinny wires on the inside of the fuel pump hanger. I ended up soldering 10 gauge wires to the inside terminals and crimped to the wires that come with the rally road kit. Also wire in an upgraded relay as well as 10 gauge wires from the battery to the pump to handle the extra current draw.
Better yet drill a small hole two holes directly into the plastic hangar top and put ring terminals with a 3mm bolt and lock nut passing thru the hat and now you have two studs on the outside 😊 And while your at it get rid of that junk rubber hose the plastic corrugated type hose you decided not to install will last for 30 years but not that rubber hose especially inside the gas. You are supposed to heat the end up prior to installing the hose. The real problem is I think the e36 hanagar uses a 3/8 barb but most fuel pump are 5/16 and no one really makes them that way. Heat it up
Really love this pov content keep it coming G Hope you get the steering wheel issue sorted asap 💪 Out of interest tell me , how much boost are you running and how much boost can the stockblock handle
Just from that driving i know that Audi is a somerset west driver (they're terrible) I am pretty sure we diced ages ago along that stretch by the strand golf club. If you can tune Honda's bra, i'd love to get in touch with you.
That turbo flutter and dumpvalve sounds awesome!
Really love the content, currently building a forged m50 at the moment so love watching your videos for motivation!
Thank you! Glad to see more people interested in the M50 platform! Goodluck!
Don’t forget to upgrade to thicker wires. I had my walbro 460/485 melt the two skinny wires on the inside of the fuel pump hanger. I ended up soldering 10 gauge wires to the inside terminals and crimped to the wires that come with the rally road kit. Also wire in an upgraded relay as well as 10 gauge wires from the battery to the pump to handle the extra current draw.
Thanks so much, I'll definitely consider doing this🙌🏻!!
Better yet drill a small hole two holes directly into the plastic hangar top and put ring terminals with a 3mm bolt and lock nut passing thru the hat and now you have two studs on the outside 😊
And while your at it get rid of that junk rubber hose the plastic corrugated type hose you decided not to install will last for 30 years but not that rubber hose especially inside the gas. You are supposed to heat the end up prior to installing the hose. The real problem is I think the e36 hanagar uses a 3/8 barb but most fuel pump are 5/16 and no one really makes them that way. Heat it up
Really love this pov content keep it coming G
Hope you get the steering wheel issue sorted asap 💪
Out of interest tell me , how much boost are you running and how much boost can the stockblock handle
Thanks bro. I went as far as running 1.4 bar boost on pump fuel but on a very conservative tune.
Man, that's really cool, I love that sound
Thank you!
@@noodytuned How much hp?
500hp 585nm
@@noodytuned 😮😍
THATS WHY YOU NEED A FAST CAR SO YOU CAN JUST OVER-TAKE THESE POEPHOLS
😂😂😂
which engine better for building? m50, m52, m54?
Personally I prefer the M50/M52 with the iron block.
Awesome video dude keep up the good work and content! 500subs in the bag ! Road to 1k 🙏
Thanks dude🙏🏼, we're halfway there🔥!!
Just from that driving i know that Audi is a somerset west driver (they're terrible) I am pretty sure we diced ages ago along that stretch by the strand golf club. If you can tune Honda's bra, i'd love to get in touch with you.
I couldn't agree more! Unfortunately I have no experience with Honda's😅.
@@noodytuned No stress! I'll be looking for ya to race when im strand side again neh ;)
ethanol will eat that rubber hose bro
I changed it out for the plastic one shortly after this video😁👌🏼.
Love what u doing brother🙌anyway i could contact u ??
Thanks, I appreciate it! Drop me a message on Insta @noodytuned.