[STEP BY STEP] How to make a very LIGHT MDF door with machined handle (WITHOUT WARNING)

How to make a very LIGHT MDF door with machined handle (WITHOUT WARNING)
In this video I teach you step by step how to make a passage door in MDF.
One of the advantages of making an MDF door is that it is possible to create it in a mimicry way, camouflaging it in the environment.
But as you know, mdf is much heavier than traditional doors, to solve the weight problem, the door was pressed using 6mm mdf on both sides with a hollow core, just with some plywood beams, which by the way, is very light.
Another problem that often happens with mdf doors is that they warp or warp. And the solution for a door without warping was the use of a 2.5x2.5cm metalon on the side opposite the hinge. Note: the side that is held by the hinge already performs the function of aligning the door. If it were a sliding or pivot door, metalon would be needed on both sides.
And to finish with a flourish, a machined armhole handle was made from the MDF itself, giving it extra charm.
If you liked the way I show you how to make a passage door in MDF, I ask you to leave a like and subscribe to the channel!
Share this video: • [PASSO A PASSO] Como f...
Channel: / @rote-woodwork
Instagram: / rote_woodwork
Other videos that might also help you:
ATTENTION! Don't make a sliding door before watching this video!
• ATENÇÃO! Não faça port...
You have NEVER seen this! Amazing CAVA HANDLE idea!
• Você NUNCA viu isso! I...
#sliding door
#portamimetizada
#puxadorcavamdf
#portademdfnaoempena How to make a very LIGHT MDF door with machined handle (WITHOUT WARNING)
In this video I teach you step by step how to make a passage door in MDF.
One of the advantages of making an MDF door is that it is possible to create it in a mimicry way, camouflaging it in the environment.
But as you know, mdf is much heavier than traditional doors, to solve the weight problem, the door was pressed using 6mm mdf on both sides with a hollow core, just with some plywood beams, which by the way, is very light.
Another problem that often happens with mdf doors is that they warp or warp. And the solution for a door without warping was the use of a 2.5x2.5cm metalon on the side opposite the hinge. Note: the side that is held by the hinge already performs the function of aligning the door. If it were a sliding or pivot door, metalon would be needed on both sides.
And to finish with a flourish, a machined armhole handle was made from the MDF itself, giving it extra charm.
If you liked the way I show you how to make a passage door in MDF, I ask you to leave a like and subscribe to the channel!
Share this video: • [PASSO A PASSO] Como f...
Channel: / @rote-woodwork
Instagram: / rote_woodwork
Other videos that might also help you:
ATTENTION! Don't make a sliding door before watching this video!
• ATENÇÃO! Não faça port...
You have NEVER seen this! Amazing CAVA HANDLE idea!
• Você NUNCA viu isso! I...
#sliding door
#mimickeddoor
#mdfcavehandle
#mdfdoordoesnotbend

[@rote-woodwork]

Já tiveram problemas com porta que empenou?

[@cimgesso8441]

Sempre darei like a pessoas q responde as dúvidas como vc. Fiz uma na minha casa no pivot. Mas ficou muito pesada. 1100x2700mm. 4 pessoas para pegar. Duas chapas cruas (1de cada lado) para fazer canal do metalon, mais engrosso de 15mm, e 2 de 6mm para acabamento

[@ControlPc10]

Genial!

[@junioribeiro9498]

Parabéns meu amigo. Obrigado por compartilhar seu conhecimento.

[@erivamsousa3336]

Excelente

[@eng.silvabn]

Trabalho impecável!

[@steliotaveira3597]

Trabalho perfeito, parabéns por compartilhar 👏👏👏👏

[@edenglish95]

Muito obrigado pela ótima aula 🙏🏼

[@aniaiosilviovenancio2032]

Xuque viu linda parabéns aorendi mas está obrigado

[@user-he4wo4uv5e]

Desse geito ai que foi colocado nao empena mesmo top demais

[@silviamartins7578]

Bom dia para vocês que Deus te abençoe grandemente ❤

[@josimarmaziero317]

Parabéns, projeto muito bem executado.

[@douglasmarcondes7438]

As travessas do meio da porta e qual material

[@AirsoftSpring]

Eu faço porta assim onde eu trabalho, e muito trabalhoso kkk segunda feira tenho duas pra fazer

[@rcodev]

essas duas chapas(da frente e atrás) são é de 15mm?

[@dilsonsapiello3730]

qual a espessura acabada da porta a parte de dentro é de 25mm e a chapa que voce cola nas partes de fora

[@edudu7901]

Agora essa prensa não seja o devo encontrar 😂😂😂

[@Marcio-eu3tp]

Com quantos kg deve ficar essa porta?

[@jorgedeichmann4456]

O MDF, a tupia, a cola, a barra de metalon sem problemas. Já a prensa….