Man, thanks for sacrificing your Braun for us to realize is an impossible mission to open the damn thing. I was laughing my lungs out, the calm relaxed music just tops it.
I know I'm late to the party, but it seem to be quite possible: th-cam.com/video/gri9J57dFMg/w-d-xo.html&ab_channel=olegpl Video is in Russian, though, so auto-subtitles might be a bit off.
Thanks for video. Gonna order me a new blender. This one served for like 10 years or so, just decided to die at the very inconvenient moment. Well, no good time for death and taxes i guess ))
It is not possible to remove it, the gray rubber is somehow sprayed to the surface as the last step after assembling the whole blender. I have tried, and you can scratch and tear it down in pieces.
How to destroy Braun 🤣🤣🤣🤣 But anyway, go hell Braun! Why did you produce a product that impossible to repair? By this way, thank you for scarifying your Braun. Now I have the same product and it is not working. Was looking for how to disassemble and found your video. I will put the Braun to the trash and never buy Braun mixer again. Thanks a lot.
Maybe they do this way to make the product less expensive, however this is not a cheap product... i really dont understand either. Thanks for your comment!
That way you will throw it away and buy a new one, this is why they make them like this. Going to that extend of complicated molds and welding techniques is not cheap...but for them to be able to sell and sell again the same product over and over again is double the profit.
My thoughts 3 min. in: 1) This could be a format to see someone try every ingenuity to get it done and then have it completely destroyed via ‘percussive maintenance’ 2) Is he trying to impress his wife? 😂 3) And I thought bomb disposal was tough.
😊👍 I see. I had problems with mine today. The motor was spinning but the spindle accessory did not. So i removed the black center piece from the axis with a long nose pliers and apply some epoxy inside and placed it back. Now it s working fine. I didn't have to take it apart anymore. Not that I had any clue on how to open it 😂😂 It s pretty counterintuitive
@@eduardburuga9540 How exactly did you apply the epoxy? I've just removed the black center piece from the axis. Did you just put it on the silver rotating "thing"?
Thanks Braun for saving the planet !
Man, thanks for sacrificing your Braun for us to realize is an impossible mission to open the damn thing. I was laughing my lungs out, the calm relaxed music just tops it.
Thank you
I know I'm late to the party, but it seem to be quite possible: th-cam.com/video/gri9J57dFMg/w-d-xo.html&ab_channel=olegpl
Video is in Russian, though, so auto-subtitles might be a bit off.
I´m very glad that Braun respects the Right to Repair (or Right to despair this time). I surely will repeat and buy another Braun.
Thanks for sharing. There's value in showing us what does and doesn't work in tearing this down. You saved me time as I have a broken one too.
The best video i have ever seen - it makes you full of hope and enthusiasm - go ahead hero!!!
Finally, it was just glue , no clips , incredible tool ..
You made my day have the same problem but somehow you brought a smile in my face, God bless
There was nothing repaired or fixed as the video title suggest. You actually broke it. All I learnt from the video was how not to break it 😂
Mine was already broken, if you try to open your own blender please dont follow my steps :). Thanks
😂
Thanks for saving my afternoon. I'll go and order a new one 😅
"The Man vs The Blender". The darn thing has it! Now it's "Me vs My Wife". She'll have a new one.
Thank you. This was actually helpful
the first 5 minutes was like watching myself
Thanks for video. Gonna order me a new blender. This one served for like 10 years or so, just decided to die at the very inconvenient moment. Well, no good time for death and taxes i guess ))
Thanks for your message! Yeah dont waste your time trying to repair it, just buy another.
ROMPISTE TODO HERMANO
My one works when you lean into it and twist it slightly to the right... i guess it needs to activate some safety mechanism
Yours is on the way out, what you say is an indication that the motor brushes are almost gone. Prepare to buy another one :)
Sad day for Braun.
So how did you take off the rotating piece?
Sorry, what piece are you referring to?
The black plastic that attaches to the shaft of the motor.
I didn't took it off, but I believe that black piece is pressed into the shaft.
If you had searched TH-cam beforehand, there is video how to open this blender on the "oleg pl" channel published in 2015
I also tried that. It has been super glued. Impossible to remove it without breaking it. Absolutely waist of time.
Repair?
I was really watching this video to figure out how to repair my blender. Are you fucking kidding me 😁
Good job
Very good👍👍👍
Thank you! Cheers!
Haha when you started off I was like "show me how it opens, I've tried all of this" then you brought out the pliers 😂
Yeah :D
sacrificaste tu Minipimer ahora se por donde atacar y yo en mi caso abri arriba y vi si el cable estaba cortado y ahora viene la parte del desarme
Luckily i didnt had the idea to follow your "instruction" step by step :D
Yeah! dont follow my steps, move in other direction ;)
Bisa ga bukanya ituh?
did you tried to remove the rubber gray thing ???
No, but that rubber thing is only for garnish
It is not possible to remove it, the gray rubber is somehow sprayed to the surface as the last step after assembling the whole blender. I have tried, and you can scratch and tear it down in pieces.
Title: "how to repair ...."
7 mins of the video the guy is just destroying the device
El video da lo que promete una grabación gore snuff con batidoras. Debería estar censurado en TH-cam, ¡qué carnicería!😁
How crash it
How to destroy Braun 🤣🤣🤣🤣
But anyway, go hell Braun! Why did you produce a product that impossible to repair?
By this way, thank you for scarifying your Braun. Now I have the same product and it is not working. Was looking for how to disassemble and found your video. I will put the Braun to the trash and never buy Braun mixer again.
Thanks a lot.
Maybe they do this way to make the product less expensive, however this is not a cheap product... i really dont understand either.
Thanks for your comment!
That way you will throw it away and buy a new one, this is why they make them like this. Going to that extend of complicated molds and welding techniques is not cheap...but for them to be able to sell and sell again the same product over and over again is double the profit.
Todo el vídeo para solamente abrir el artefacto!!!
انت كده جبت اجله مع انه بيصله بسهوله جدا بس انت كسرته
8:05 open
POR LO QUE VEO NADIE QUIERE METERSE CON ESTA MARCA, PUES NO HAY NI UN VÍDEO DE reparación de PROCESA-DORA BRAUN.
😂😂😂👍🏻👍🏻👍🏻
This is no repair , this is destruction 😕
Plus handling a knife that way is ridiculously dangerous.
Yep, thats what the thumbnail says! destroy :D. Well, too many years handling knifes, still have all of my fingers around ;)
هذه الشركة سيئة يجب ان يكون هناك براغي للفك
My thoughts 3 min. in: 1) This could be a format to see someone try every ingenuity to get it done and then have it completely destroyed via ‘percussive maintenance’
2) Is he trying to impress his wife? 😂
3) And I thought bomb disposal was tough.
I impressed my wife because in the end bought a new blender for her :)
Use hammer!
until we fixed it :D
Sooo....this is a video of a guy doing what i was doing at home..... Botching the sht out of the blender only to realise...
Te gané a bruto lo que tardas tes tu ya destroce la carcasa
كسرتها
😇😁😀😀😇😇😇😇
Hahahaha...Bhai bhai bhai
😂👏👏👏👍
когда руки растут из ж0пы
Fucking blender. Front black hold becomes missing in 1st week of use .
я в круговую распилил пилой ,полюбовался на это гавно, и выбросил
Tanto trabalho para ir para o lixo
It opens easily from the other side 😂
Not if you want acces to the engine
Title is so wrooooooong
XD yes, the title was the plan to repair, the video is what happened
😊👍 I see.
I had problems with mine today.
The motor was spinning but the spindle accessory did not.
So i removed the black center piece from the axis with a long nose pliers and apply some epoxy inside and placed it back.
Now it s working fine.
I didn't have to take it apart anymore.
Not that I had any clue on how to open it 😂😂
It s pretty counterintuitive
@@eduardburuga9540 Nice tip! I will put it in the description, thanks!
@@mrfixit8400 You are most welcome
@@eduardburuga9540 How exactly did you apply the epoxy? I've just removed the black center piece from the axis. Did you just put it on the silver rotating "thing"?
Maa behen ek kr di
U fg kiddin me ?
Czysty baran
😂😂😂😂😅😅😅😅
lol
😂😂😂
😂😂😂😂🙈
))))))))
😂
Braun shit
how to destroy .... dont waste my time
Don't buy this
wasting time