Thanx man... Love me some Bullet too... All the songs in there were actually written and recorded by a buddy of mine... you should check out some of the song I wrote earlier this year and let me know what you think... Thanx for watching...
Great vid Macon, im trying to do exactly the same, i started with the base and am now looking to do the top. I will try the same system as your first vid, Thanks.
Hey Macon, I do bikes and metal but slowly getting into wood. Just got myself a similar saw set up..... Fence is rubbish, frame rubbish, table rubbish .... Good news is that the saw is good. You've inspired me to have a go at this project man and thanks for that. Love the presentation, music and the way you explain what's going on in the vid. Great stuff brother, sub'd.
Your offspring has a future in advertising with that spiel at the end of the vid. A bit of experience in talkovers won't hurt either...by the way, good work with the table saw cabinet.
Hahaha... yeah, she actually does radio ads at some local stations here... she said she could do a better job than me... and I think she was right... LOL... Thanx man...
Great vid man. I appreciate you sharing your experience with us and glad i found this because i too want to start woodworking as a hobby but from ground up - I have nothing but a few tools lol Also i wanted to see a little bit more of the saw table at the end. Even then, looking forward to your next vid 👌
MDF is a bad material to use in almost all cases because it isn`t a very stable material. It`s very absorbent and will warp over time, the dust is harmful to humans and animals and it flakes off when damaged. Substitute three quarter inch plywood for the MDF and all the problems go away. MDF sucks moister from the air and the edges quickly start to swell and where you cut holes for bolt heads you will notice that the bolt heads will start to weaken the material and stop being efficient at tightening the fence.
enjoying you video. im also from South Africa Northern cape. finding t- tracks and other accessories like the American and European is hard here in SA and pricey
Thanx... Yeah its a real headache... doing dust collection in the shop now, cant find half the parts I need... made some awesome blast gates on the laser cutter... you can check it out and download on Thingiverse... I'd add a link, but my PC at work wont open thingiverse... :-( ... just search for my profile.. gonna be sharing a lot more of my designs there...
I have never seen that plunge technique before mate, that's awesome. That will come in very handy I'm sure. Sounds like a Durban or Cape town aven't there?
really nice video series man, I'm from South Africa and could relate to a lot of the problems you had, like finding t-track and dealing with that crappy fence on that table saw. I have the same table saw and i need to do all these same upgrades as well. I really like your videos, I can see you're heavily inspired by some of the big woodworking channels like april wilkerson, jimmy diresta and jay bates etc. My videos are more inspired by Laura Kampf and Giaco Whatever. Anyway, I'm really looking forward to more videos. I hit that subscribe button and the bell as well.
Thanx for watching and subscribing... I think Namibia sucks harder LOL... I cant even get decent plywood here... Checked out your channel, I like the style of your videos... Subscribed!... you got some nice projects there.. Stay tuned, I still have a couple more upgrades planned for that table saw, as well as some other "hopefully" interesting projects... I'll be keeping an eye out for your next video...
Awesome build dude !!! Lekker easy projekte. Jy kan T track by extrusion world in Windhoek kry. Hulle verkoop dit as floor track. Ek het dit by hulle in die kaap gekry. R150 vir n lengte van 6.6 meter. 🤘🤘🤘😁
I've done some dodgy stuff in my workshop,even cut my finger off once on the tablesaw and took the top off another,but seriously mate,bare foot in the workshop is just looking for trouble:)
This is Africa, Africa got no place for sissies. Here we walk the whole day barefoot thru thorn country in the blazing sun in only shorts. I have been working barefoot with my father in the garage from the age of 7. 40 years down the line and never had a foot injury as result of being barefoot.
Hate to be "that guy" but MDF dust is very dangerous! Please get a paper dust mask at the least. We want to to stay healthy enough to keep posting great videos like this series.
Hi ek het dieselfde saag ,mooi man. Maar, as jy die deur oop maak dan gaan die saagsels uit val. Maak 'n kas in jou kas wat die saagsels opvang en jy kan uithaal en leeg maak .
I'm sorry. I tried to watch this, but man oh man...WTF are you doing? You used the jig saw and circular saw to cut the panels for your base. What the he!! do you think the table saw is for?! Then you used the little hack saw to finish off the cuts on the top cut out. What do you think the jig saw is used for! I stopped it there, sorry, but I couldn't take it anymore!
Oh well... thanx for trying though... we all had to start somewhere... I've learnt a lot over the last 4 years since this build... I can assure you I would do it differently now... 👍
@@maconSTUFF Porker 574 1 second ago Hi Macon...sorry, I'm not really such an a$$hole normally. I guess I was in a mood when I watched this. I know you were doing your best. I shouldn't have been so cruel. Please accept my apologies!
Ek beide jou videos oor die tafel saag gekyk. Ek het die selfde saag en gebruik hom al vir die laaste 8 jaar. Smeer eerder die tafelblad met Cobra poletoer. Hier is 'n skakel na waar jy T-tracks kan bestel. www.banggood.com/buy/t-track-alumin.html
Music sounds like bullet for my valentine 😄
Great work man!
Thanx man... Love me some Bullet too... All the songs in there were actually written and recorded by a buddy of mine... you should check out some of the song I wrote earlier this year and let me know what you think... Thanx for watching...
You should consider adding a short border on your table trolley top, so that whatever is on it won't slide off.
Thanx man... good idea...
Great vid Macon, im trying to do exactly the same, i started with the base and am now looking to do the top. I will try the same system as your first vid, Thanks.
Yeah man... these cheap table saws really suck... good luck with your build... and thanx for watching...
Thanks for the reply dude, halfway through my build, going really well thanks to your vid, subscribed! Keep up the good work!!
Hey Macon, I do bikes and metal but slowly getting into wood. Just got myself a similar saw set up..... Fence is rubbish, frame rubbish, table rubbish .... Good news is that the saw is good. You've inspired me to have a go at this project man and thanks for that. Love the presentation, music and the way you explain what's going on in the vid. Great stuff brother, sub'd.
thanx so much... good luck with yours...
thanks for sharing, appreciate your problem solving ideas.
Thank you very much...
Never seen paint dry that fast, lol. Your plunge cuts are as good as mine!!
:-) Thanx James
Great video
Your offspring has a future in advertising with that spiel at the end of the vid. A bit of experience in talkovers won't hurt either...by the way, good work with the table saw cabinet.
Hahaha... yeah, she actually does radio ads at some local stations here... she said she could do a better job than me... and I think she was right... LOL... Thanx man...
Great vid man. I appreciate you sharing your experience with us and glad i found this because i too want to start woodworking as a hobby but from ground up - I have nothing but a few tools lol
Also i wanted to see a little bit more of the saw table at the end. Even then, looking forward to your next vid 👌
Thank you very much, yeah I know the feeling, I am also still fairly new to woodworking
MDF is a bad material to use in almost all cases because it isn`t a very stable material. It`s very absorbent and will warp over time, the dust is harmful to humans and animals and it flakes off when damaged. Substitute three quarter inch plywood for the MDF and all the problems go away. MDF sucks moister from the air and the edges quickly start to swell and where you cut holes for bolt heads you will notice that the bolt heads will start to weaken the material and stop being efficient at tightening the fence.
enjoying you video. im also from South Africa Northern cape. finding t- tracks and other accessories like the American and European is hard here in SA and pricey
Thanx... Yeah its a real headache... doing dust collection in the shop now, cant find half the parts I need... made some awesome blast gates on the laser cutter... you can check it out and download on Thingiverse... I'd add a link, but my PC at work wont open thingiverse... :-( ... just search for my profile.. gonna be sharing a lot more of my designs there...
I have never seen that plunge technique before mate, that's awesome. That will come in very handy I'm sure. Sounds like a Durban or Cape town aven't there?
Pretty close... just across the border in Namibia... :-)
just a thought. that base is a lekka sturdy frame. maybe u could turn it into a router table...?
actually planning a new "wider" base... this one i built is a bit narrow, so if you put too much weight on either side it wants to tip over..
really nice video series man, I'm from South Africa and could relate to a lot of the problems you had, like finding t-track and dealing with that crappy fence on that table saw. I have the same table saw and i need to do all these same upgrades as well. I really like your videos, I can see you're heavily inspired by some of the big woodworking channels like april wilkerson, jimmy diresta and jay bates etc. My videos are more inspired by Laura Kampf and Giaco Whatever. Anyway, I'm really looking forward to more videos. I hit that subscribe button and the bell as well.
Thanx for watching and subscribing... I think Namibia sucks harder LOL... I cant even get decent plywood here...
Checked out your channel, I like the style of your videos... Subscribed!... you got some nice projects there..
Stay tuned, I still have a couple more upgrades planned for that table saw, as well as some other "hopefully" interesting projects...
I'll be keeping an eye out for your next video...
MACON CAMPBELL thanks man I really appreciate that! looking forward to the next upgrade
What table saw was this brand thank you
It is a Ryobi...
Will you put a riving knife on?
Possibly... haven't really thought about that.
Awesome build dude !!! Lekker easy projekte. Jy kan T track by extrusion world in Windhoek kry. Hulle verkoop dit as floor track. Ek het dit by hulle in die kaap gekry. R150 vir n lengte van 6.6 meter. 🤘🤘🤘😁
Baie dakie bra, ek sal bietjie daar gaan check...
I've done some dodgy stuff in my workshop,even cut my finger off once on the tablesaw and took the top off another,but seriously mate,bare foot in the workshop is just looking for trouble:)
This is Africa, Africa got no place for sissies. Here we walk the whole day barefoot thru thorn country in the blazing sun in only shorts. I have been working barefoot with my father in the garage from the age of 7. 40 years down the line and never had a foot injury as result of being barefoot.
LOL
Good job ....but yamaha FJR is the best ....i have the same !!!greatings from Greece !!
Yeah... FJR is my best bike so far, and I've had a few... Thanx for watching...
Hate to be "that guy" but MDF dust is very dangerous! Please get a paper dust mask at the least. We want to to stay healthy enough to keep posting great videos like this series.
No worries man... I've learnt my lesson... :-)
Nice man...thanks for sharing....you need more lighting for the better videos...i'm sorry and i don't want to be mean...i like your videos
Yeah... i hear you... working on it..
Thanx for watching..
Hi ek het dieselfde saag ,mooi man. Maar, as jy die deur oop maak dan gaan die saagsels uit val. Maak 'n kas in jou kas wat die saagsels opvang en jy kan uithaal en leeg maak .
Dankie... ek het n ou stofsuier box gevind wat persies daar in pas, hy werk darem so ver...
Hel bra next project moet jy n shed vir jou bike bou ....al daai stof kan nie goed wees vir hom nie
LOL... ja nee, goeie plan...
Yster. Bly om te sien jou videos kry lekker baie views. Kan sien jy sit baie moeite in. Hoop om binnekort nog te sien!
Baie dankie ou... ja, dit verbaas my ook... het nog n hele paar videos beplan, moet nou net by hulle uitkom... :-)
I'm sorry. I tried to watch this, but man oh man...WTF are you doing? You used the jig saw and circular saw to cut the panels for your base. What the he!! do you think the table saw is for?! Then you used the little hack saw to finish off the cuts on the top cut out. What do you think the jig saw is used for! I stopped it there, sorry, but I couldn't take it anymore!
Oh well... thanx for trying though... we all had to start somewhere... I've learnt a lot over the last 4 years since this build... I can assure you I would do it differently now... 👍
@@maconSTUFF Porker 574
1 second ago
Hi Macon...sorry, I'm not really such an a$$hole normally. I guess I was in a mood when I watched this. I know you were doing your best. I shouldn't have been so cruel. Please accept my apologies!
Ek beide jou videos oor die tafel saag gekyk. Ek het die selfde saag en gebruik hom al vir die laaste 8 jaar. Smeer eerder die tafelblad met Cobra poletoer. Hier is 'n skakel na waar jy T-tracks kan bestel. www.banggood.com/buy/t-track-alumin.html
Dankie... sal dit in gedagte hou... dankie vir die link, sal moet n paar bestel..
I appreciate your video, your ideas etc., Kill the so called MUSIC. If I'm going to watch your videos I want to listen to YOU, not the back ground .
Thanx Brian, I'll keep that in mind...