Number 1 - Use 25 to one during breakin. Number 2 make sure cooling good.. non ethanol best. You can buy 3 of these for price of 15 hp name brand. Mercury most advanced outboards are all made in China. They don,t need much choking and none when warm.. Can be lifted by 82 yr old. Light. like mine too.
Bought an 18-hp hangkai for my 10ft aluminum jon boat. Strengthened my transom, and thing flies. It's been 1 year, so far, no issues. Starts every time.
Just picked up the 12 hp for $889 on amazon shipping and yax included. These are Tohatsu M 9.8B clones so most parts should be interchangeable from what I understand. I did hear another owner say the rubber parts dont hold up well over time they start leaving residue when touched
Hi. I bought same outboard but 15hp 2 years ago. Its been great. Its basically a copy of the Yamaha 2strokes made with pretty good quality parts. 1 thing 2check is the thermostat. They don't always fit them. Mine didn't have 1 so I fitted 1. Just means the engine won't ever be running at optimum temp 55⁰c
I would have to deal with that high level to get cooling water. Shouldn't be to big of a deal ONE VERY IMPORTANT THING!!!!!! TAKE THE PTLEOPO IFF REGULARLY AND CHECK FOR FISHING LINE WOUND AROUND PROP SHAFT, IT WILL EAT THE SEALS OUT!!!!
@@timhuggins9366 when the boat comes on plan the water level is MUCH lower, is it a get it primed thing? I would have mine jacked up on the transom a lot
@@ronpezzulo7615 mine came with 2 extra spark plugs, and an impeller that the manual said to change at 100 hours of use i never had to order parts but there was a website in the manual. Thanks for the comment!!!
Question, at 4:44 it likes water is coming out pee hole and well and draining down from under the cowling, it that the exhaust water hitting the cowling and draining down or what. I' would thing that the water should be directed out the hole better than than that, if that's what's happening. Edit: I don't think you'd want water being splashed around under the cowling.
@@hermannugent4279 yep did a 3 year review video just before i sold my boat with the motor, ran great the entire time i owned. Thanks for the comment!!
12hp 2 stroke doesn’t seems to be getting full power at full throttle . Tell me about the air/gas mixture setting. Where is the sweet spot? Seems like it runs better with the hood off
Probably around 20 hours i was down most of the summer last year and didnt get out on the water much, im looking forward to this year and getting up more content! Thanks for the comment!!
@@timhuggins9366 do u run the residual fuel out of the carb at the end of a trip.. the ethanol is corrosive. also using marine fuel stabilizer can help. question, can you get replacement parts for these motors?
Yeah generally i run it out of fuel especially before i store it for the winter. From what ive been told Tohastu 9.8 is the same motor and parts will interchange. Ive never had to replace anything yet so im not 100% but thats what people are saying??
i imagine the motor should be fine it is a Yamaha Clone and i’ve had severalYamaha motors over the years bothOutboards and Motorcycles /ATV i’ve always had good luck with them of course Japan is usually better thanChina in quality and Materials i’ve noticed these Hang Kai’s are not as quiet as a Yamaha or the Grey Ghosts as we call them on Law Enforcement boats ! one of my best freinds and i were riding on a guys boat that took a group of us to a Waterfront restaraunt and that boat Owner was drinking pretty hard so he was loud and wobbly on his feet the LocalMarine Police watched this with his Binoculars sort of hidden behind some docked boats and didn’t get more than a quater mile when the Ridgid came up behind us to blip his Siren and turn on his lights my best freind was talking with his Lady and almost crapped his pants because he didn’t see the boat coming up behind us it turned out the guy had a bulb out and got a warning which he was more than lucky to get because he stunk like a Barrel of Bourbon IMO and was running too fast in a NoWake Zone plus under severe Influence of Alchohol we were in a quiet Tributary of the Chesapeake Bay and this guy was another member at our Marina who heard where a group,of us were Anchoring for the Weekend
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
Thank you for this update really appreciate the dedication to this motor and your fans!
Thank you! Thanks for the comment and the kind words!
Thanks for the video. Because of the price I've had some interest in these motors and it looks like they could be a decent buy.
Had mine just over 3 years and it ran great! Good luck!!
Thank you for the update. I plan to get the 12 horsepower hangkai outboard soon, and I really appreciate your help.
Number 1 - Use 25 to one during breakin. Number 2 make sure cooling good.. non ethanol best. You can buy 3 of these for price of 15 hp name brand. Mercury most advanced outboards are all made in China. They don,t need much choking and none when warm.. Can be lifted by 82 yr old. Light. like mine too.
Yep totally agree thats why i keep tellin folks to follow break in procedure in the manual, do that and all should be fine.
Mercury is made in Japan by Tohatsu
Not the mid range models up to 60 hp.
Bought an 18-hp hangkai for my 10ft aluminum jon boat. Strengthened my transom, and thing flies. It's been 1 year, so far, no issues. Starts every time.
Yeah man! Been 3 years and still goin strong for me. New video commin as soon as ice gets off the lakes here and warms up!
I'm trying to choose between the 12hp and the 18hp hangkai, what's the top speed on your 18hp? Thx
Rip from a hydro racer, raise the engine as high as you can and it still plan off and gets cooling water, it'll scare ya!
I love my Hangkai motor had no issues with it at all.
thats it then im going to order the 18hp thanks for this new sub for you
Thank u! New video comming soon as the weather breaks.
Just picked up the 12 hp for $889 on amazon shipping and yax included. These are Tohatsu M 9.8B clones so most parts should be interchangeable from what I understand. I did hear another owner say the rubber parts dont hold up well over time they start leaving residue when touched
Can you share the link? Cheapest I see is little over 1k with shipping.
Hi. I bought same outboard but 15hp 2 years ago. Its been great. Its basically a copy of the Yamaha 2strokes made with pretty good quality parts. 1 thing 2check is the thermostat. They don't always fit them. Mine didn't have 1 so I fitted 1. Just means the engine won't ever be running at optimum temp 55⁰c
I would have to deal with that high level to get cooling water. Shouldn't be to big of a deal
ONE VERY IMPORTANT THING!!!!!! TAKE THE PTLEOPO IFF REGULARLY AND CHECK FOR FISHING LINE WOUND AROUND PROP SHAFT, IT WILL EAT THE SEALS OUT!!!!
@@independentthinker8930 yeah wen iys on the boat it sits much lower in the water, and YES to the fishing line. Lol
@@timhuggins9366 when the boat comes on plan the water level is MUCH lower, is it a get it primed thing? I would have mine jacked up on the transom a lot
Doing update videos like this are valuable. Thanks alot. Maybe do a video of it performing if you can.
Gonna try weather not been worth a dam. Lol
I still have my 15 hangkai and still loving it!
Where can you get parts if you need to change the impeller
@@ronpezzulo7615 mine came with 2 extra spark plugs, and an impeller that the manual said to change at 100 hours of use i never had to order parts but there was a website in the manual. Thanks for the comment!!!
Im thinking on it myself.
Question, at 4:44 it likes water is coming out pee hole and well and draining down from under the cowling, it that the exhaust water hitting the cowling and draining down or what.
I' would thing that the water should be directed out the hole better than than that, if that's what's happening. Edit: I don't think you'd want water being splashed around under the cowling.
@@sadbutwedidntstartit just the design, it does flow straight out, but hits the hole in the cowl and drains out. Thank for the comment!!
Hey, I’m curious as to what you’re seeing speed wise with this motor and what boat you have it on?
Ive got a 16 lowe jon top speed been right aroumd 15-18 mph depending on what i have with me in the boat.
From what I can find this is a direct copy of a Mercury 169cc two stroke
Is your Hanhkai still running good?
@@hermannugent4279 yep did a 3 year review video just before i sold my boat with the motor, ran great the entire time i owned. Thanks for the comment!!
Thanks a ton do you know the weight of the engine?
Yeah its around 70-80 pounds i believe. Thanks for the comment!!
12hp 2 stroke doesn’t seems to be getting full power at full throttle . Tell me about the air/gas mixture setting. Where is the sweet spot? Seems like it runs better with the hood off
Well it would definitely get more air with the hood off but if that's the case you could always cut some vents in it lol
I’m almost decided on the 18hp for my 16ft Lowe. I’m wondering if the shop will work on it if needed and obtaining parts.
Depends on the shop honestly. Some will some wont just give em a call and see if its something they will work on. Thanks for the comment!!!
Is that a short shaft? I have a 12 ft aluminum im thinking of putting this on.
Its between a short, and a long it measures 17 inch
How's it doing now, any issues
Still purrin along. Shes all put away for the winter. Springtime i will do another video!
Will this motor handle saltwater
how many hours approx do u have on it total?
Probably around 20 hours i was down most of the summer last year and didnt get out on the water much, im looking forward to this year and getting up more content! Thanks for the comment!!
@@timhuggins9366 do u run the residual fuel out of the carb at the end of a trip.. the ethanol is corrosive. also using marine fuel stabilizer can help. question, can you get replacement parts for these motors?
if you can get 4 good years out of the motor it was a bargain. plz keep us updated.
Yeah generally i run it out of fuel especially before i store it for the winter. From what ive been told Tohastu 9.8 is the same motor and parts will interchange. Ive never had to replace anything yet so im not 100% but thats what people are saying??
Any idea of top speed?
15-18 mph on a 16ft lowe jon. Its a 2021 model
How loud is it
Do they come with Serial number and MSO documentation to get it titled?
@@captain-Ricky-Bones they do have a serial number, but no paperwork for a title, or origin. Thanks!!
i imagine the motor should be fine it is a Yamaha Clone and i’ve had severalYamaha motors over the years bothOutboards and Motorcycles /ATV i’ve always had good luck with them of course Japan is usually better thanChina in quality and Materials i’ve noticed these Hang Kai’s are not as quiet as a Yamaha or the Grey Ghosts as we call them on Law Enforcement boats ! one of my best freinds and i were riding on a guys boat that took a group of us to a Waterfront restaraunt and that boat Owner was drinking pretty hard so he was loud and wobbly on his feet the LocalMarine Police watched this with his Binoculars sort of hidden behind some docked boats and didn’t get more than a quater mile when the Ridgid came up behind us to blip his Siren and turn on his lights my best freind was talking with his Lady and almost crapped his pants because he didn’t see the boat coming up behind us it turned out the guy had a bulb out and got a warning which he was more than lucky to get because he stunk like a Barrel of Bourbon IMO and was running too fast in a NoWake Zone plus under severe Influence of Alchohol we were in a quiet Tributary of the Chesapeake Bay and this guy was another member at our Marina who heard where a group,of us were Anchoring for the Weekend
Take out on the water,open it up.
Wow, you need to go fishing more young man! lol
I just hate two strokers because they stink so bad.
Lol i hear that man, for the money 1200 for a brand new motor i will deal with it i reckon. Lol thanks for the comment!!!
Update on the teeth oh exciuse me the hankai