Bosch Aquatak 125 High Pressure Washer - Unboxing & Demos
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2022
- Hello Everyone,
Based on your feedback and suggestions, we have done an unboxing, review and demonstrations of Bosch Aquatak 125 High Pressure Washer.
We had done a deep analysis & review of various High Pressure Washers and most being Chinese, operated at lower capacity than declared/advertised and also there were many that had issues with sub-optimal efficiency as well as issues like motor winding burning off etc.
Bosch is a German Brand and will maintain their quality standards and operating efficiency. Please note that we are not advertising for Bosch nor are we sponsored by anyone. So our opinion is unbiased and fair.
Do subscribe to our channel, like our videos and press the Bell Icon for reminders of our future videos.
Also share with us which other areas, places, food/cuisine and products you would want us to review.
Thanks and Cheers !
Harold Fernandes
For TravelsUnravel
:-)
/ travelsunravel_27
/ travelsunravel-1027521...
Excellent video, all the questions i had in mind to own such a product. You have answered it.
If you segment the video with description i feel you will get more views.
Being in english helps a global audience too.
Only thing missing is rotating nozzle demo, that works well around under side,wheels and license plate area of cars.
Thanks for your comments and also your suggestion for segmentation of video. It's really an excellent idea. Will definitely consider it for all future videos as well. Happy viewing & Happy Washing !!! 😄
amazing help with the detailed review, liked and subbed thx :)
That's great to get feedback and encouragement from you ! Thanks very much 🙏🥰 Please also suggest what kind of videos you would like me to do. Best Regards.
Thank you sir for mentioning, self priming won't work unless you lift the bucket. I too was wondering why this issue is occuring. I see you also have switched the inlet pipe too which is much stronger as the latter pipe gets distorted while suction acts.
@@ankitguleria - you are most welcome. Thanks for your acknowledgement too !
Appreciate your hard work and genuine feedback/demo
Sincere Thanks - your response is very encouraging !!!! 🙏
Thank you, it's the most authentic review and demo of a product. God bless you
Thanks very much 🙏🥰
Thank you for very detail vedio
Thanks for your appreciation and encouragement !!!
Nice video. Have a similar problem of the building car wash guy not doing his job correctly. Would love to get my car down for this pressure wash. 🙂
Thanks for your response. Sure - Let me know when and we will be happy to do a free wash for you, preferably next week. 🙏
Kudos and thanks for the great efforts to make this Video. Can u say are 2 full Buckets of water enough for this Spary gun consumption
Yes dear. More than sufficient. First time vehicle only needs to be sprayed wet for application of car shampoo, which basically consumes half a bucket. Then after shampooing, one and half bucket is more than sufficient to wash off shampoo. 🙂
thanks :) do you have a link for the foam container?
VMTC Adjustable Foam Cannon Nozzle Lance 700ml High Pressure Car Washer Accessory for Bosch Pressure Washer Gun Aquatak/AQT www.amazon.in/dp/B07WSPT45V/ref=cm_sw_r_cp_apanp_SqKzU6LBcrKkB
I just bought a Bosch aquatak 135. I made all the connections but a few seconds after starting the hose which was connected to the garden water pipe and which I had connected the other end to the machine, it disconnected, it gushed out due to the built up pressure between the garden water pipe and the appliance. I reduced the pressure at the boot but the same thing happened. How should I add water to the machine? should it be water from a barrel for the machine to suck or should I connect like I already did but have very little pressure to the machine? Maybe the machine doesn’t need too much pressure from my garden hose? My garden water pipe on full blast has a lot of pressure so I could just wash my car without the need of a pressure washer. Should I put the pressure from the pipe very low when connecting the hose to the pressure washer?
Hi - Thanks for writing in. Please ensure that the connectors of the Hose pipe to the Machine are the proper ones and connected snugly. Then you should not have disconnection or gushing issues. On Amazon or some other site check out the connectors that go on Hose pipe both sides as well as on the machine end.
Let me know once it's done or if you still need any guidance.
Thanks
👍
It happened to me too. You just need to buy new,fitting part,it worked for me.
how many liters of water does it take to wash a car? does putting the water bucket up have an effect on water consumption? thank you
To wash a small.car, it takes around 1 and half bucket. For a large car it could take around 2 bucket.
I found that keeping the bucket at a slight height creates good pressure, however consumption doesn't reduce.
Thanks - Harold
Hello sir, is the pressure washer working fine without any issues currently (after 1 year)?
Hello - thanks for writing to enquire. Yes - it's still working well though I had to change the Soap spray container around 2 months ago since the threads to lock it had turned lose. It is mainly the motor that is really powerful and reliable.
Foaming was pretty poor to say the least
You do realize that thick foam doesn't mean better cleaning power?
👎👎👎
Jiggling
Hello - What does Jiggling mean and in what context ? It will help if you share your feedback too. Sometimes, experiences differ from person to person. If you have had a different experience, it will help if you share it so that others also benefit from it. Thanks - :-)