BUILD A DUAL PERMANENT MAGNET ROTOR WIND TURBINE (PART 19)

แชร์
ฝัง

ความคิดเห็น • 334

  • @xsivstress
    @xsivstress 9 ปีที่แล้ว +2

    The Best I've seen Yet , Certainly Explained Better then Most .. Thanks for Posting , if Not for Innovators Such as Yourself we would be in debt up to Our ears, But With these Kinds of Innovations , I hope the Energy Companies Know they are not the ONLY GIG in town .. Thank You

    • @muddymuddymuddmann
      @muddymuddymuddmann  8 ปีที่แล้ว +2

      +Wayne Harris Wayne, that sounds like a breath of fresh air to me. Thank you bro.
      MUDDy

  • @balu9438
    @balu9438 7 ปีที่แล้ว +13

    The world needs more dudes like the mud man, cheers

  • @doug132639
    @doug132639 4 ปีที่แล้ว

    SCOTT,You made a great video ,you explain it so well every step of the way.. I am an old welder 72 and love learning something new about every day..PLEASE keep going ..I hope some young guys / girl learn from you ..you teach well man even how to stick that tape 🙏💚💚💚

  • @justthinkalittle8913
    @justthinkalittle8913 ปีที่แล้ว

    about 7 min into this video and I was like yeah, I like this guy. subbed

  • @jordannielson9664
    @jordannielson9664 4 ปีที่แล้ว

    You sound like people are honored to be around you

  • @glenchadwick420
    @glenchadwick420 3 ปีที่แล้ว

    Love your since of humor! Its the kind that makes me want to learn and continue watching your videos😁. Great job Scott.

  • @misterdude4296
    @misterdude4296 5 ปีที่แล้ว +1

    Gets all the oil off, stresses the importance of cleaning up minute amounts of oil from skin then grabs the magnet and gets oil all over it before installing it. What a genius!!!!

  • @JesusNowEschatology
    @JesusNowEschatology 8 ปีที่แล้ว +3

    You're hilarious!!! These are so much fun to watch. Thank you!

  • @martymcmannis9121
    @martymcmannis9121 5 ปีที่แล้ว +1

    Keeping the magnets cool is a great idea. I never knew that they got hot. Thanks for the video.

    • @eyetube64
      @eyetube64 4 ปีที่แล้ว +1

      The friction of magnetic flux gets them warm to hot depending on the speed and the duration. Plus outside weather. When they get hot they have the risk of demagnetizing and then you just have pieces of metal. So keeping cool is a means of optimizing your flux.

    • @MrSummitville
      @MrSummitville 3 ปีที่แล้ว

      @Marty Mcmannis
      - Under high loads, the stator coils generate a lot of heat.

  • @SurrealNotion
    @SurrealNotion 5 ปีที่แล้ว +5

    Thank You Sir!! I throughly appreciated and enjoyed this video even though I have no intention of making, using or helping build one of these beautiful pieces of art...
    God Bless You and Yours as well as the good people who follow you and obviously love you so dearly...

    • @muddymuddymuddmann
      @muddymuddymuddmann  3 ปีที่แล้ว +1

      You owe me a box of tissues for making my eyes water up.
      Folks like you rock this world.
      Many good things to you and yours.
      MUDDy

    • @bodeamir4484
      @bodeamir4484 3 ปีที่แล้ว

      I know im asking randomly but does any of you know a method to get back into an Instagram account??
      I stupidly lost my account password. I would appreciate any help you can offer me

    • @darianahmed1401
      @darianahmed1401 3 ปีที่แล้ว

      @Bode Amir instablaster =)

    • @bodeamir4484
      @bodeamir4484 3 ปีที่แล้ว

      @Darian Ahmed i really appreciate your reply. I got to the site thru google and Im trying it out atm.
      I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

    • @bodeamir4484
      @bodeamir4484 3 ปีที่แล้ว

      @Darian Ahmed it worked and I now got access to my account again. I am so happy:D
      Thanks so much, you saved my account !

  • @rasimyeniyurt9382
    @rasimyeniyurt9382 3 ปีที่แล้ว +2

    good idea

  • @paverop
    @paverop 11 ปีที่แล้ว

    Muddy, I really like all of your videos. I think people like you that educate us out in TH-cam land are providing a valuable service to humanity as a whole. I must say. I'm a rather unconventional man and I find myself not willing to conform to the ways of others. With that said, I'd like to ask a few questions of you. I have already acquired 56 of the same magnets that you have, giving me enough for 28 sets of magnets. With my unconventional and nonconformist ways,I'm doin things different

  • @FixItStupid
    @FixItStupid 7 ปีที่แล้ว

    Well Done Brother Scott, Your , Fix IT

  • @nelsonscott3811
    @nelsonscott3811 3 ปีที่แล้ว +1

    Very good job

  • @christo930
    @christo930 12 ปีที่แล้ว

    I once saw a talk about an old windmill producer who's windmills were the best in their day. The person giving the talk said that the blades were designed to slow down in a hurricane. I don't know exactly how it worked, but I do know that the when I looked up the company they did in fact exist and were highly praised and that many of them are still up and fuctional today and are sometimes sold for a lot of money. I wish I could remember the name.

  • @pvampire
    @pvampire 13 ปีที่แล้ว

    I cant wait to see it run the first time on a windy day! That is going to be so epic!

  • @itce6043
    @itce6043 2 ปีที่แล้ว

    Wery great idea.😃

  • @aniutalitvinova9957
    @aniutalitvinova9957 4 ปีที่แล้ว

    Life is like a story. Important not in how long, but in how well.

  • @FrankaDith
    @FrankaDith 13 ปีที่แล้ว

    Im looking at the right of my screen and all those beautiful video,s are all right there step by step to a better futur and a whole lot of fun ; )
    Green winds here we all come!!!

  • @billybaulbuster7503
    @billybaulbuster7503 10 ปีที่แล้ว +1

    Thanks Scott. You have your shit together my friend! If I knew where you are, I would take you for a beer.

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +3

      My old friend Billy Bawlbuster. I am glad to hear from you bro. I accept the brew. I have been known to drink one every now and then. To see you in person would be celbration enough for one.
      I noticed the comment about advertising, You will be glad to know,... I have taken any add that is longer than 15 second off the list. That dropped the operating funds down quite a bit, But it also made me take time away from the projects to recuperate. But I promise not to re-initiate any longer ones. Such torture would be cruel and unusually enduring pain to my viewers. lol.
      BTW, I know where the moonshine is.
      MUDDy

  • @carr869
    @carr869 6 หลายเดือนก่อน

    I started building this turbine. Got the stator done and decided not to finish it because I determined that I would need a 100 ft. Tower. I live in the middle of the woods. Now I have 24 epoxy coated 1”x2”x.5” magnets for sale so if ya know any body that needs some magnets and a stator.

  • @xapplimatic
    @xapplimatic 4 ปีที่แล้ว +1

    You just made a magnetic wall clock modern art!

  • @lostlife4631
    @lostlife4631 4 ปีที่แล้ว +1

    Great work 🌹

  • @nolimitstech8595
    @nolimitstech8595 5 ปีที่แล้ว

    I like that fly zapper, classy.

  • @TURK_182
    @TURK_182 7 ปีที่แล้ว +1

    That's one nice looking rotar!

  • @siggyretburns7523
    @siggyretburns7523 5 ปีที่แล้ว +2

    "I'm Scott Brown with Greenwind & other home energies".
    I dont know if its just the way you say it or the way its written out. But that is one catchy title.
    And I love neodimium magnets. The problem is they dont like me. And I got the bite marks to prove it. But anyways, someday I'm going to figure out how to utilize these magnets along with other natural forces and laws of physics and create a low intake - high output energy scource.
    Anyways, this looks very cool and I'm gonna shadap now so I can finish watching it 👍.

    • @muddymuddymuddmann
      @muddymuddymuddmann  5 ปีที่แล้ว +1

      Thanks for the compliments oh great one. :)
      May your thinking drive you a successful solution for those magnets. Give it time and desire, and watch it form.
      MUDDy

    • @siggyretburns7523
      @siggyretburns7523 5 ปีที่แล้ว +1

      @@muddymuddymuddmann
      Fortunately, the neodimiums i have are out of harddrives and such. Nothing in "dismember" size yet. Remember the really old 5 megabyt hard drives? 1/2 the size of a shoe box, twice the memory I retain. Now THOSE had some magnets (n56?) I got two of them stuck together. 3 people took turns trying to get them apart. Chisels finally did it, but not before a bunch of pinched fingers. Lol.
      T/c mud. Great video 👍

  • @MrLodhibaba
    @MrLodhibaba 11 ปีที่แล้ว

    Mr.Scott Brown,
    GOD Bless you.You are really nicest from the New York.

  • @blingsingh6857
    @blingsingh6857 4 ปีที่แล้ว

    PRODIGY. You are great sir. Method of presentation is very good. God bless.Gurinder jit singh.From jalandhar punjab.

  • @ramzeneger
    @ramzeneger ปีที่แล้ว

    I love it!

  • @jimbougard8560
    @jimbougard8560 4 ปีที่แล้ว

    Making a magnet rotor (out of a brake rotor) to fit on a standard hub is FRIGGIN' GENIUS!

    • @MrSummitville
      @MrSummitville 3 ปีที่แล้ว

      It may have been Hugh Piggot, who had this original idea in 1993 ...

  • @DancingSpiderman
    @DancingSpiderman 11 ปีที่แล้ว

    You're a purty handy guy, Muddy.

  • @DancingSpiderman
    @DancingSpiderman 11 ปีที่แล้ว

    haha! ha, very good Muddy!

  • @jpopelish
    @jpopelish 10 ปีที่แล้ว +1

    I think you will find that slow cure epoxy resin is a lot stronger than polyester, does not shrink, has a lot higher bond strength, and higher temperature capability than polyester. Adding mineral filler (talc, glass microballoons, fine sand) improves all those except bond strength. It also gives you a lot longer working time.

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      That is great info, and i agree with the slow cure as well. slow cure doesn't heat up and expand, then contract or shrink. I didn't know about the less bonding strength with fillers. Thank you for this as well.
      Knowledge is free to give and very precious.
      MUDDy

  • @BungaEBiker
    @BungaEBiker 13 ปีที่แล้ว

    This is quite interesting, I saw a video series a while ago where a guy was showing everyone how to convert a ford truck alternator into a mini wind turbine. he also used stock PVC parts to make the blades and case.

  • @jgcjunior1
    @jgcjunior1 5 ปีที่แล้ว

    Smart and funny video.. very good!!!

  • @georgiossarailidis9884
    @georgiossarailidis9884 3 ปีที่แล้ว +1

    Love this.. All around :)

  • @valveman12
    @valveman12 13 ปีที่แล้ว +1

    Hey Scott
    I really enjoy your videos. Especially the great ideas you showcase.

  • @FrankaDith
    @FrankaDith 13 ปีที่แล้ว

    Well muddy im glad you got a video of the product thats gonna become the first of many demos that make heating some of the house a reality .
    Or Doctor Mcgovern has some great plans too he,s an engineer him ,yup make it good on the first try cause some are comming behind.lol

  • @user-hv7qi3nr5k
    @user-hv7qi3nr5k 9 ปีที่แล้ว +2

    Your magnets are familiar to me, because I produce these magnets. The coating, package are all the same. LOL

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      Thanks Sir. This is great to meet one that actually makes the magnets. I used to be a goldsmith. I could cast and repair just about anything, and custom make, or fabricate as well. I noticed on the magnets, that they are copper electroplated first, then plated with the nickel. That leads me to beleive that neodymium doesnt accept the nickel without the copper first. It is nice to meet you Sir.
      Is there any chance I could Buy magnets cheaper through you? Thank You very much.
      Stay safe and blessed in all things.
      MUDDy

    • @user-hv7qi3nr5k
      @user-hv7qi3nr5k 9 ปีที่แล้ว +1

      ***** Yes. you can buy magnets from me and we can produce Nickel-Copper-Nickel, three layer coating. Please contact me Skypr: zheng.sophia3 Email: magnet06@winchoice.cn

    • @janetedwards6654
      @janetedwards6654 9 ปีที่แล้ว +1

      +郑望菲 Will you ship through Cheaper and reliable Shipping Company like China Mail Post? Do not tell me china post do not accept magnet because majority of Aliexpress Sellers ship magnets through Chinapost, Singapore Post, Flyexpress etc. Answer my question.

    • @send2olusegun
      @send2olusegun 8 ปีที่แล้ว

      Send your email and PIC of the magnet

  • @josaphe
    @josaphe 8 ปีที่แล้ว

    U r a scientist...Love you ,,from India.

  • @peppino66castro
    @peppino66castro 13 ปีที่แล้ว

    good job scott this is real professional keep up the good work.joe

  • @robertcabanlig6908
    @robertcabanlig6908 7 ปีที่แล้ว +2

    Hi Muddy Man,
    Sure you got this axial motor video a great tutorial for everyone who would like to try like me.
    Can you be so kind to give us info on magnets you used and where we can buy them.
    thanks and more power and hope to see new designs youve been cooking

  • @CheekyMonkey1776
    @CheekyMonkey1776 3 ปีที่แล้ว

    This guy has a genius I.Q....isn’t it obvious?

  • @wtam69
    @wtam69 13 ปีที่แล้ว

    I know you don't need another compliment but I have to say excellent work and thanks for sharing.

  • @carr869
    @carr869 6 หลายเดือนก่อน

    Forgot to mention I’d sell the magnets for $15. a piece shipping included.

  • @Bob_Adkins
    @Bob_Adkins 5 ปีที่แล้ว

    Interesting. Lot of powerful magnets, should make a ton of power efficiently.

  • @BinjKomisar11
    @BinjKomisar11 10 ปีที่แล้ว +1

    That is pretty. :) Thanks for sharing your knowledge.

  • @magna59
    @magna59 13 ปีที่แล้ว

    Great to see this good work. May be advisable to add a mechanical attachment, a dome allen screw or three so as there is thermal expansion & contraction between the GRP resin & magnet & cast steel brake disc, so the disc does not shed the whole set up affer a heavy frost or a very hot day. Or may be some light twine, threaded through the vanes of the disc & across the resin.....dacron or may be dental floss and finish of with a coat of super glue, to fix the knots.

  • @insightsoflife6952
    @insightsoflife6952 5 ปีที่แล้ว +1

    nice video .
    but i think there s something u dont know about magnets.
    the magnets are magnetic because the flux wants to go treu a material as easyest and fast as possible.
    Hence it pulls on metal.(fero) because it lets the flux go true eassy.
    but when u put a magnet on a metal plate the fluxfield collapses because it found a way to go eassyer true metal then true air (permeability)
    lets give the field size of a magnet u hold in your hand a number lets say 10
    then when u put that magnet on a metal plate the size of the fluxfield wil shrink allot maybe by half because the fluxfield wants to go true the eassyest material to go treu. then it wil be like size 5.
    if you want to build a windmill to produce electricity you should have magnets mounted in a ertalon or other strong plastic disk that way the fluxfield wil be mutch bigger making a bigger difference in the coil making a higher voltage and bigger amps.
    Voltage and amps it creates depends on ....
    - the strengt of the magnet N value (example N43 )
    - The speed of the change going from N to S the faster the change the bigger the induction
    - the size of the fluxfield covering your coils (to big coils or to small magnets wil get you low V and A) coils shhould be made depending on the size of the magnets.
    -The ammount of windings and gage in your coils.(more windings more volts bigger gage bigger amps you can draw if there s enough wind to keep it spinning offcourse ) the more u draw power the more resistance it wil have on the magnets making then stop eventually making your proppeller stop.
    Second you should try to have all components in your windmil made out of NON electric guidng materials (except your coils offcours) because they create dragg.
    a magnet has no effect on copper of aluminium when static (not moving)
    but when u move a magnets fast over aluminium or copper plate u wil feel it resists the movement like its braking.
    so if you make around the stator a aluminium frame or tube it wil dragg out your windmil making it run slower.
    Olso the axle of your windmill should be a NOn ferro mettal like aluminium because if its ferro it wil pull on the flux field of the magnets making them smaller.
    last but not least its always best to use ass much as possible plastic in the whole design of the generator then it wil not cause dragg and it wil not pull on the fluxfield of your magnets.
    I have not made a windmill with all these things in mind but its allot of stuff to keep in mind to make it as efficient as possible.
    There s allot more to keep in mind but this is a beginning of a efficient windmill..
    cheers and goodluck.

  • @ozziebenigno5646
    @ozziebenigno5646 6 ปีที่แล้ว

    good job my friend.

  • @tinkergalloot
    @tinkergalloot 13 ปีที่แล้ว

    Well done ... You made it look easy ....well thought out. Good on ya !

  • @DStrayCat69
    @DStrayCat69 11 ปีที่แล้ว

    You can get rid of the air bubbles by heating the epoxy with a Propane Torch... Like a Bunz-o-matic burner... Add less hardener as the heat will make it setup faster... The edges will be smoother too, as the heated epoxy will level out... It becomes water like and will flow downward and level out completely...

  • @sumandas4677
    @sumandas4677 4 ปีที่แล้ว +1

    Thank you so much sir 🙏🙏🙏

  • @paverop
    @paverop 11 ปีที่แล้ว

    Thank you Muddy

  • @shartne
    @shartne 13 ปีที่แล้ว

    That turned out Good! Good Job! Looks Great!

  • @VictorMiranda-yt6xe
    @VictorMiranda-yt6xe 7 ปีที่แล้ว +2

    To: Karhi Keyan. If you want to buy magnets, please go to AMAZON,COM, You will find at least 6 suppliers able to sale and
    ship your order internationally. Please be advised that international shipping is very expensive and slow. So try to buy from
    the nearest seller to your country. By the way, what country are you from?. 10/27/'16.

  • @rubendlove
    @rubendlove 12 ปีที่แล้ว

    you give me some great ideas how to build my generator. thanks man. you're awesome.

  • @smartcomsolutions946
    @smartcomsolutions946 4 ปีที่แล้ว

    Infomatic
    Thank you
    GOD BLESS YOU TOO

  • @paverop
    @paverop 11 ปีที่แล้ว

    Thats actually a pretty good idea. I've seen one here on YT like that, but the man never posted the results.

  • @laytonhamilton5000
    @laytonhamilton5000 11 ปีที่แล้ว

    you make it so simple to understand

  • @offgridd
    @offgridd 10 ปีที่แล้ว +2

    Hi scott,
    I really like your pragmatic approach on your project and also the sound of the wind blowing at the background ;-)
    Can you give me some info about the power you want to create with your setup?
    I an thinking of making a diesel engine powered generator ( not enough wind here...) and would like to learn how to calculate things like windings, rpms magnet field strength etc etc.
    Regards
    Paul

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      The voltage is a parameter that can change with rpms. so using an engine will allow you to achieve the voltage desired so long as the magnets dont fly off on high rpms. The current is limited to the size of the wire in the coils. less resistance in fat wire, but less turns per coils as well, with lower volts out.
      as it sits right now, i hope to generate 750 watts. at 12 volts that would take 62 amps, a nice feat for two strands of 14 gage wire. two strands of 14 gage wire approximates 9 gage wire. I say two strands because two phases of coils are producing at any given time. I hope this helps.
      rpms dictates voltage, tourque dictates amperage.
      Thanks
      MUDDy

    • @offgridd
      @offgridd 9 ปีที่แล้ว

      +muddymuddymuddmann Hi M. (typing shorter :-) ) Thanks for answering!, Starting to build a miniature generator I try to understand the magnet/coils positioning according to the right fases. Did your generator succeeded in delivering 750 watts?

  • @boycotatlanta
    @boycotatlanta 4 ปีที่แล้ว

    Good job
    Thanks

  • @walkertongdee
    @walkertongdee 11 ปีที่แล้ว

    Resin for glue always has filler powder as a thicker or fiberglass cloth both will ease any cracking. I have never had cracking except once when using epoxy. Epoxy is harder than polyester and prone to cracking when used without filler or cloth. Polyester is forgiving more hardener generally won’t harm anything and there are hardening accelerators as well. Epoxy and Polyester isn’t meant to be used without cloth or filler powder. Later MUDDY

  • @paverop
    @paverop 11 ปีที่แล้ว

    Another question Muddy...Like I said, I have 56 of the magnets (28 sets) I'd like to base my PMG on Markp0177's generator. Although, it wont be exactly like his. Rather than have a single magnet per coil like his does, I think the opposing magnet idea is a better one. His has 28 magnets and 28 coils, yet is 2 phase. I'd like mine to be 2 or 3 phase (preferably 3 phase) Have a look at his design and let me know what you think. Be prepared to answer a few more questions.

  • @laytonhamilton5000
    @laytonhamilton5000 11 ปีที่แล้ว

    i love all your videos

  • @XaymacaJah
    @XaymacaJah 5 ปีที่แล้ว +1

    rue American inginity!!! AWESME!!!!
    I used a plexiglas wheel to hold my magnets, but i like yr style better.

  • @ffjsb
    @ffjsb 4 ปีที่แล้ว

    I would've sandblasted the rotor first. That way you can paint the whole thing to prevent any rust at all. You want to prevent any rust chips from being attracted to the magnets later on. Use gloves when using brake clean or acetone, because you can absorb that stuff through your skin, and you won't have to worry about fingerprints.

  • @davidprock904
    @davidprock904 5 ปีที่แล้ว +1

    Do you want a battery that never dies, read the book called the fourth phase of water, you can make a battery with two like metals for probes and 100% in distilled water and a hydrophilic surface

  • @abdelfettahoumizane9396
    @abdelfettahoumizane9396 3 ปีที่แล้ว

    Thanks

  • @tufedw19
    @tufedw19 6 ปีที่แล้ว +1

    Thanks for making such detailed videos, awesome. Still have the rest to watch, but I was thinking of doing a serpentine style rotor. A neighbor does scrapping and he has a bunch of multi stand wound wire where it looks as if it would be equivalent to 14 gauge. then wind it to 3 phase set up. I was also thinking of using a 8-5/8 stainless steel plates 1/8" thick, where the corner of magnets would be about 1/4 apart. Watching your videos I am now wondering if this would work. this set up would fit into a squirrel cage (10-3/4"H X 11-7/8"D weighing maybe 2 pounds) I was going to use for a VAWT design to go on top of my travel trailer. Not being an electrician, and my lack of 100% understanding in this, suggests that what I was going to do would have been a waste of material. Any suggestions or ideas on this. Again thanks for the great in-depth videos.

  • @WarblesOnALot
    @WarblesOnALot 13 ปีที่แล้ว

    @muddymuddymuddman
    G'day... Ah, me hat's off to ya Scotty ! What a delightful clip..!! What a brilliant production process...!!! Superb effort, all round. I like it . And I hìt the button. And it goes to the Favourites List.
    Yay Team..!
    I can't wait to see a clip of your first SunFoil...; Yeee Haaaa !
    Respectful Regards,
    Chris.

  • @Touched_by_a_12_gauge
    @Touched_by_a_12_gauge 13 ปีที่แล้ว

    SWEET !!!!

  • @christo930
    @christo930 11 ปีที่แล้ว

    Isn't that a 2 way street? It seems to me that using a heavy rotor will smooth out the lack of consistency with the wind by continuing on it's own inertia, but it will also take much longer to get up to speed. BTW... Thanks for posting these videos. I enjoy them.

  • @Sprungmonkeyboy
    @Sprungmonkeyboy 10 ปีที่แล้ว +10

    I never knew that about south and north end magnets as you flip them I nthe air :)

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      Ya, I think it is very cool. I have played with a magnet flipping them in the air for hours as i sit and think. I found out about it from otherpower. They are loaded with good knowledge, and they have a channel here on youtube as well.

    • @ClownWhisper
      @ClownWhisper 5 ปีที่แล้ว

      @@muddymuddymuddmann where did you get those magnets China or India? can I ask you how much the whole block was because that would accommodate just about what I'm doing

    • @MindTrip888
      @MindTrip888 5 ปีที่แล้ว

      @@muddymuddymuddmann Ever considered making a magnetic coin ;)
      hehehe... just kidding

    • @siggyretburns7523
      @siggyretburns7523 5 ปีที่แล้ว

      How about which way the toilet swirls when you flush it? Clockwise southern hemisphere, counter north...i think. lol
      Now i gotta go flush the toilet to find out.

    • @rushbayou5230
      @rushbayou5230 5 ปีที่แล้ว

      ... HEADS I WIN ... TAILS U LOOSE... LMAO

  • @MarkShepard
    @MarkShepard 5 ปีที่แล้ว

    this is awesome!

  • @mark8664
    @mark8664 5 ปีที่แล้ว

    I guess it is a good generator design after all.

  • @GdGllyMolly
    @GdGllyMolly 11 ปีที่แล้ว +1

    Awesome video series. Hope you don't mind that I shared on my facebook. Quick question... where are you finding your magnets? I've been looking for them in bulk and I'm worried that the ones I am finding online aren't strong enough to do much more than hold a crayon drawing to the fridge. Pointers please and thank you?

  • @TomTreeMan
    @TomTreeMan 5 ปีที่แล้ว

    Metal surfaces heat sink and moisture condenses on the surface, especially sanded surfaces

  • @rida7002
    @rida7002 6 ปีที่แล้ว

    thank you so much, Sir.

  • @chrisdrake4692
    @chrisdrake4692 5 ปีที่แล้ว +1

    You should have arranged these as a Halbach array - it would have been twice as strong...

  • @vigramm
    @vigramm 5 ปีที่แล้ว

    Energy from the magnet can be obtained without any mechanical movement.
    All we need is material capable of being converted from magnetic to
    nonmagnetic when applying electrical impulses. This will simulate the
    rotation of the armature in the generators.
    Such a material was created for other purposes and there is technology.
    More info ?

  • @audiokees4045
    @audiokees4045 5 ปีที่แล้ว +1

    I ask myselfs, when short the coils outputs, can you still turn the magnet disk? normally this get's very heavy to do but now without metal in it how it does then. I had a idea to make one, but a vertcal one, nee a good design for that so I get efficienty as high as possible. Some do use a oil drum other bike wheels, Maybe you now a good one.

  • @alejandrodelabarra2838
    @alejandrodelabarra2838 5 ปีที่แล้ว

    ¡Muy bueno, boy!
    Congratulations!
    God bless you!

  • @ProtViewer
    @ProtViewer 5 ปีที่แล้ว

    voll die Verarschung!

  • @kevinanderson9243
    @kevinanderson9243 8 ปีที่แล้ว

    Makes sense to me! Thanks brother!

  • @nourahrmumeenslave
    @nourahrmumeenslave 13 ปีที่แล้ว

    I'm still wondering if you are The Guitarman (the trucker). He used to sing a song called "Walkin' & Talkin', Talkin' & Walkin' on channel 19 of course, up through West Virginia & East Tennessee.

  • @walkertongdee
    @walkertongdee 11 ปีที่แล้ว

    pollyester and baby powder makes good glue

  • @paulwyleciol3459
    @paulwyleciol3459 6 ปีที่แล้ว

    Sir, very good idea with the brake disc!, as you could use the axle bearing! Bravo!
    But please tell me, as it is not very clear to me: Actually the north or south should not point up or down but from the end of the magnet. So it should be in 04:23 away from you OR towards you, am I right?,
    The next thing: isn't the steel of the break disk completely disturbing the magnetic fields of the single magnets, building up a complex new summary of magnetic field???

  • @samuelchesnot772
    @samuelchesnot772 9 ปีที่แล้ว +1

    intéressant

  • @seanscully8980
    @seanscully8980 10 ปีที่แล้ว +1

    Just an idea next time you make your magnent templet form use uhmw teflon type cutting board (flexible type) plastic. Machines just like wood. Slick, durible, and cheap.

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      Actually i was going to use a cutting board, but when it made it's way home, the wife claimed it. lol.
      Thanks
      MUDDy

  • @paverop
    @paverop 11 ปีที่แล้ว

    Continued...I plan on, rather than making a flat stator,one that is a ring with the coils standing on edge. The magnets will be on opposing sides of this ring, standing on edge.Now I have to ask you. Should I make 28 coils? If so, how far apart should these magnets be? Meaning that with 28 magnets standing on end there would be 1 inch between the north and south ones around the circumference of this ring. With that config. how big should the coils be in relation to the magnet size?

  • @christo930
    @christo930 11 ปีที่แล้ว

    I was talking about very short periods of intermittent wind, in the order of seconds.

  • @kevinanderson9243
    @kevinanderson9243 8 ปีที่แล้ว +1

    Question....what would the output be , ballpark, if this were a single rotor and not dual? The ceiling fan wind turbines could be called single since they don't have magnets opposing them and wired properly they put out about 2 amps. Would a single rotor and stator, the way you have made your coils, generate 10-12 amps?

    • @muddymuddymuddmann
      @muddymuddymuddmann  8 ปีที่แล้ว +1

      the coils will still be able to handle the same amps, But it would take more RPMs to do the same voltage, and the same torque to achieve the amps.
      Although when the RPMs needed to achieve the charging voltage is reached, And amperage is drawn, The voltage drops, and requires even more RPMs. These RPMs will be under more torque.
      The main goal with two rotors is to lower the RPMs needed to reach charging voltage in lower winds. Otherwise it would take higher winds to even start charging. Lower winds are more common.
      If you used a prop around 1/2 length, That would cure the RPM problem, BUT, at a cost of 75% of your total power lost.
      I hope this helps.
      MUDDy

  • @davidprock904
    @davidprock904 5 ปีที่แล้ว

    Did you know if you take an array of magnets all in repulsion and force them together, they will fall to the earth slowly than if in attraction, same/type and weight/setup. And no I’m not talking about throw a metal pipe. You will need a good dropping distance to notice or a very high frame camera, don’t count as a stopwatch style, count by video frames... if a short dropping distance

  • @tomaizahy
    @tomaizahy 10 ปีที่แล้ว +1

    thank you

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      Thank you as well my friend. Is that a banjo you are holding in your picture?
      MUDDy

  • @WarblesOnALot
    @WarblesOnALot 13 ปีที่แล้ว

    @muddymuddymuddman
    No worries, beìnd the SunRoof'll be fine... In fact, over the Engine, or on the "trunk"lid... Anywhere's better than nowhere..The vehìcle Needs a PV !
    It's 9*C. here atm, 14:45 local time...; today's top temp was 11*Celsius... According to the Mercury Max-Min, on the Southside of a Treetrunk, head-high in a ventilated insulated hutch...
    Enjoy the boquet. Well deserved !
    Ciao.

  • @bobsaturday4273
    @bobsaturday4273 7 ปีที่แล้ว +1

    wait a minute ! you put brake parts cleaner on your hand to clean off oils ?
    THAT STUFF IS HIGHLY CARCINOGENIC !!!

  • @nolifemerc
    @nolifemerc 12 ปีที่แล้ว

    Follow up questin mudd: the magnets ur using is expensive, is it possible to use cheaper magnets and stack them ontop of eachother?

  • @josegeronimo3690
    @josegeronimo3690 9 ปีที่แล้ว +1

    Congratulations friend, very good your video, like to which the magnets measurements, which car is this brake disc, I am very grateful for your attention.

    • @muddymuddymuddmann
      @muddymuddymuddmann  9 ปีที่แล้ว +1

      José Geronimo The disk rotors are 11 1/4 inches. This project is much better, and easier if you use 12 inch rotors, or larger.
      Thanks.
      Gracias.
      MUDDy

  • @christianb9472
    @christianb9472 5 ปีที่แล้ว

    Started with part 19. Need Statistics on how much energy this makes, and how you store the energy it puts out.