@@isabellongoria7479 Before you start the engine you prime the pump. You turn the hose on and shoot regular water through the pressure hose (The part he's holding) and let all the air out. You know it's good when water is flowing out the gun without large gaps of no water coming out it. Then you can safely turn the engine on. It's one of the first things in the manual on the operation page.
Hi, thanks for the video. I hope this reaches you in time. The cap you have on the pump is for use during shipping. You need to replace it with the yellow one that has a vent for expansion when it heats up.
be careful when pipes flatten like that, Little known fact, When you restrict the flow of a High-Pressure pump (Mostly Hydraulic Pumps) the water will Boil in the Intake side, causing small bobbles, When the pump is running the bobbles will collapse, and form again, when they collapse, They Collapse with such speed and force it can pit and cavitate the pump. If left to do this, It will destroy the pump, make sure the inlet is far from restricted.
Hello. Great video and great machine. I bought the same rating of machine and having some issues. Please I really need your help. Can you please send me a picture of the silver plate showing rating on the engine if possible. Model, Rated Power, speed, net weight, etc. I will indeed be very grateful.
Not bad. I'm sure is strips wood down to it's core. Must work well on streets caked in bird crap and grimy grease from alleyway kitchens. I have a 2700 that takes mold off concrete and wood well. I'm intrested in experimenting with a 5000 sometime. . . . What have you used yours on so far???
Don't understand hows mains can't cope but an IBC can? Mains is more pressure and higher flow rate. Think you need to sort the hose for a reinforced one.
Gotta have a burnt valve or cavitation.. thats not 5kpsi... either he has it turned down or he starts it like that every time and has a melted valve/ leaky valve... the way it was stuttering like that after he started it with no water makes me think its damaged .. maybe unloader or ez start is fucked up... dunno...
Doesn't help not knowing what nozzle yoi are using so we can understand its power. Anyhow wrong nozzle for the job or fake psi. Next time do a test with all nozzles so people have reference
All it needs now is somebody who knows what their doing 😂
You teach him how to pressure wash and he can teach you how to put together a grammatically correct sentence.
You don't know what your doing.
Never start a pump dry like that....
What do you mean?
@@isabellongoria7479 He means never start the pressure without water flowing through it first.
@@isabellongoria7479 Before you start the engine you prime the pump. You turn the hose on and shoot regular water through the pressure hose (The part he's holding) and let all the air out. You know it's good when water is flowing out the gun without large gaps of no water coming out it. Then you can safely turn the engine on. It's one of the first things in the manual on the operation page.
Hi, thanks for the video. I hope this reaches you in time. The cap you have on the pump is for use during shipping. You need to replace it with the yellow one that has a vent for expansion when it heats up.
Thats a sweet as* pressure washer. Plenty of pressure to do whatever you need it to.
The sound tho!! Gonna be in trouble with the neighbours
POWER BABY!
be careful when pipes flatten like that, Little known fact, When you restrict the flow of a High-Pressure pump (Mostly Hydraulic Pumps) the water will Boil in the Intake side, causing small bobbles, When the pump is running the bobbles will collapse, and form again, when they collapse, They Collapse with such speed and force it can pit and cavitate the pump.
If left to do this, It will destroy the pump, make sure the inlet is far from restricted.
Tau whoa 😲
Kindly provide Setup ie Diesel Engine and pump, this will definelty destroy my cleaning times👍
Surprised that it couldn't rip the greens on the kerb
So was He...
Imagine
He should test rotor jet and fan tip which is better and faster?
Is it available with electric motor attachment?.
Hello. Great video and great machine. I bought the same rating of machine and having some issues. Please I really need your help. Can you please send me a picture of the silver plate showing rating on the engine if possible. Model, Rated Power, speed, net weight, etc. I will indeed be very grateful.
I would need more psi to take concrete off shutter panels if you know what they are.
How much are they
Absolutely, handless man:(((
If you swept a floor like you pressure wash, there would be still trash scattered throughout.
Not bad. I'm sure is strips wood down to it's core. Must work well on streets caked in bird crap and grimy grease from alleyway kitchens. I have a 2700 that takes mold off concrete and wood well. I'm intrested in experimenting with a 5000 sometime. . . . What have you used yours on so far???
Chipping concrete, cutting weeds from the curb, ect. - 😉
Don't understand hows mains can't cope but an IBC can? Mains is more pressure and higher flow rate. Think you need to sort the hose for a reinforced one.
Not always the case. I had low pressure at our industrial unit and the flow was terrible
Can u provide in Nepal
Need a belt drive for all that hp
Rip concrete
LOL!!! - 😆
Crikey please don't do my driveway lol
That’s for destroying not cleaning 😂
What women think men want:Sex
What men actually want:
How is that 5000 psi? My 3200 does better than that.
3200psi is nice water flow is important too
Thats not nearly 5000 psi, 5000psi could cut a car in half
its cos he's got his pressure washer at a 40° angle
@@BeatstormX bruh 5000 psi is used in army to wash cars dumb
@@BeatstormX 44000 psi can cut a car for your kind information
Gotta have a burnt valve or cavitation.. thats not 5kpsi... either he has it turned down or he starts it like that every time and has a melted valve/ leaky valve... the way it was stuttering like that after he started it with no water makes me think its damaged .. maybe unloader or ez start is fucked up... dunno...
Imagine this is what they use for lazer guns
Is there a pressure gauge to show psi
No Mervyn there is no gauge
Doesn't help not knowing what nozzle yoi are using so we can understand its power. Anyhow wrong nozzle for the job or fake psi. Next time do a test with all nozzles so people have reference
I was wondering how I could buy this
Im sorry we stopped selling pressure washers
Yooo water 1 …. that pump will go if you keep doing that
Live pretty near, how much does it retail for
No longer sell them sorry Fred
whot the price of that
Sorry we don't sell washers anymore
What's the price & Wight in Nepal
Nepal price & Wight
I'm sorry we no longer sell these machines
Are u still selling these
No sorry
@@Sandblasters anything similar
He butchered those weeds 😭😂
That return pipe should be connected back to tank what a waste of water!
It was just a test Steve. If I was using it for work it would definitely have a pipe going back into the tank. I hate wasting water myself.
Do you know what test mean?
@@mf3721 it's 'means' oh the irony 😆
@@stevem7250 : Report Him to OSHA --- LMAO! - 😆😁
3:45 STOP you are ripping the road apart! You need to stop using that now
Shut the fuck up bruh.
OK KAREN
Rouve ton eau avant la pompe 1 semaine est scrape
Shocked
😱😱😱😱
Start the machine without
*"WATER"*
😱😱😱😱
$6000 Going directly to the trash.
😱😷🤪🙃