Drain holes in 4x corners are models before 22 April 2024. The newer models seem the same, just relocated drains to the sides of the fixture plate and made them double wide. As for curing, if it's still sticky after five days, the mixture wasn't mixed thoroughly and it'll be a problem a long time. You should be able to add a skim coat and the hardener in it will react with the sticky epoxy and give a final nice set up. Don't need to rush this. Just make sure it's throughly mixed...can use auto epoxy from local store. If you need to thin it out, being a skim coat, thin it with acetone...like a cap full at a time until it's pretty runny. The acetone will evaporate out within 40 minutes and the epoxy will set up within the normal time.
Please for the love of god show how to calibrate the touch probe. I've calibrated it 4 times already. I have no idea how it keeps coming out of alignment.
They have an upgrade kit they have just released for the touch probe, because some folks have had issues with them not working properly (probably your case). They are selling them at cost on their website, they will ship in the next couple of weeks, according to them.
When he says wipe down epoxy, wipe it off with acetone (nail polish remover). Use gloves of course. Let the rag off gas outside and add to your normal trash when doesn't stink so much.
Nice timing. Doing my epoxy on Thursday.
not sure i understand we just build ours ? and the drain are not like these ? As for the curing, its been 5 days now and still sticky ?
Drain holes in 4x corners are models before 22 April 2024. The newer models seem the same, just relocated drains to the sides of the fixture plate and made them double wide.
As for curing, if it's still sticky after five days, the mixture wasn't mixed thoroughly and it'll be a problem a long time. You should be able to add a skim coat and the hardener in it will react with the sticky epoxy and give a final nice set up. Don't need to rush this. Just make sure it's throughly mixed...can use auto epoxy from local store. If you need to thin it out, being a skim coat, thin it with acetone...like a cap full at a time until it's pretty runny. The acetone will evaporate out within 40 minutes and the epoxy will set up within the normal time.
Please for the love of god show how to calibrate the touch probe. I've calibrated it 4 times already. I have no idea how it keeps coming out of alignment.
They have an upgrade kit they have just released for the touch probe, because some folks have had issues with them not working properly (probably your case). They are selling them at cost on their website, they will ship in the next couple of weeks, according to them.
When he says wipe down epoxy, wipe it off with acetone (nail polish remover). Use gloves of course. Let the rag off gas outside and add to your normal trash when doesn't stink so much.
You should def be wearing a mask when rubbing all of that concrete dust off with a brush.