I really enjoy your channel. You are producing some quality pieces. Thanks for letting all of us tag along with you and pick up some tips and tricks. Well done.
Looks great! You definitely can't beat the smell of fresh cut cedar! My dad owns a sawmill, and we cut all of the cedar for a 16x30 deck at my last house. It's such a beautiful wood!
Great build, I bet your shop smelled amazing with that cedar! Try cutting the end of a plastic straw to a V to get glue out of those tight corners, works like a charm! Keep making videos bud, enjoy them!
great video. i have three questions for ya. 1) @3:00 why do you do those cuts on the miter saw instead of a table saw? just curious. 2) when do you decide to apply poly/finish with a foam brush vs a rag or towel? 3) what kind of table saw do you have? cheers!
1. I've been lazy and havent made a jig for the table saw lol. 2. foam brush just gives me a better finish. 3. Ridgid hybrid saw (its ok, not the best)
Great video- thanks for sharing! I'm making 4 of these today. 1 question- it looks like you covered the screw heads with trim but when you seal the box the screw heads are showing (8;27) - am I missing something?
I'm OBSESSED with cedar 😀 The smell is my favorite of all time...well, I like the smell of unleaded gas also 😳😀 I'm a weirdo!!!! Anyhoo ...I'll have to do this so once it's hung outside my windows...I'll be able to smell it through my window into my house ....NOTHING LIKE THAT WONDERFUL SMELL!!!!!!
Very nice, I plan on making one for the back of my house. I have a question though, I read all of the comments and no one asked this so here it is...You didn't make any holes on the bottom for the water to drain away? is there a reason why not? thanks
I came across your channel because of it's name. I don't know if you are familiar with the Adirondacks in New York State but it's referred to the area inside "The Blue Line"! I glad I happened upon your channel either way keep up the great work and I appreciate the tip on using sawdust and glue for a color match filler! Thanks, DC
just found your channel. really enjoying it. i just made my first cornhole set and you sure made it look easy! wish i had seen your video beforehand but sometimes you gotta learn by doing. just curious - did you go to umass? cheers man, great content.
As nice as they turned out you definitely should next time counter sink the screws and fill them like the nail holes to take the elephant on the planter boxes out of the equation. Just saying nice job other than that, especially after you put your finishing on there they really stuck out like a sore thumb. 👍 good work though
4:22 you talk about stainless screws using them so you don’t get bleed through why not use them on the Trim nails . I notice on a new house build they didn’t use stainless on Facia trim and you can see rust on the white paint already house is not even a year old. Million dollar home on the ocean don’t get it . I say if outside stainless more money but less come backs.
Lazy Lab Acres, LLC guys on the crew make me nervous when they're framing and don't keep their hands out of the way. Many times I've seen a stray nail pin a hand to a 2x. It makes me cringe watching. I'm no saint... I cut a thumb off on a table saw. Luckily they were able to reattach... without the knuckle.
![⭐ฮิตในTikTok!! ( มะมะมะหมูเด้ง MooDeng ) Ver. แดนซ์ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/4noyAoMa7bQ/mqdefault.jpg)
Really enjoyed the speed version and the trim was a great touch. Thank you.
I really enjoy your channel. You are producing some quality pieces. Thanks for letting all of us tag along with you and pick up some tips and tricks. Well done.
Thank you very much for the support, it means a lot! More videos coming soon!
Impeccable work. 👏👏👏
Looks great! You definitely can't beat the smell of fresh cut cedar! My dad owns a sawmill, and we cut all of the cedar for a 16x30 deck at my last house. It's such a beautiful wood!
Thank you! Milling up that much must have smelt amazing!
Great build, I bet your shop smelled amazing with that cedar! Try cutting the end of a plastic straw to a V to get glue out of those tight corners, works like a charm! Keep making videos bud, enjoy them!
Thanks for the support and the tip!
Just found your channel. I love our work. Keep 'em coming.
Thank you sir! I appreciate the support
Awesome ,the stamp is cool 😁
Thank you! Curious if you need to line the inside of the box for soil moisture , water flowers etc…. I appreciate the video
Really nice! I love the smell in the shop whenever I use cedar! Great video...keep them coming!
Thank you for the support! Cedar smells amazing!!!
Good job Joe!!! They look great and the brand turned out awesome!!!
Thank you sir!
What a great project. I will definitely be making some. Can I ask where you got your branding iron? I'd like to brand some of my handiwork. Thank you.
great video. i have three questions for ya. 1) @3:00 why do you do those cuts on the miter saw instead of a table saw? just curious. 2) when do you decide to apply poly/finish with a foam brush vs a rag or towel? 3) what kind of table saw do you have? cheers!
1. I've been lazy and havent made a jig for the table saw lol. 2. foam brush just gives me a better finish. 3. Ridgid hybrid saw (its ok, not the best)
What size boards is used for everything ? 1x6x8?
Great video- thanks for sharing! I'm making 4 of these today.
1 question- it looks like you covered the screw heads with trim but when you seal the box the screw heads are showing (8;27) - am I missing something?
Thank you☺️❤️hubby ( mid Valley mercenaries )is making me some on Tuesday 👏🏻❤️👏🏻
Awesome!
Good job bro, keep up the great work!
Thank you sir, I really appreciate the feedback!
BlueLine WoodWorks oo
You said if you don't have a track saw or jointer, you could use a table saw to get a straight edge. How do you do that?
Burning question: what is your music in this video? Spectacular stuff
Shoot, this video was so long ago I can't remember 😂
I'm OBSESSED with cedar 😀 The smell is my favorite of all time...well, I like the smell of unleaded gas also 😳😀 I'm a weirdo!!!! Anyhoo ...I'll have to do this so once it's hung outside my windows...I'll be able to smell it through my window into my house ....NOTHING LIKE THAT WONDERFUL SMELL!!!!!!
What kind wood do you Recommend for this particular window box
Can u share the thin size of planks , and how wide the bottom Thanks
Id use a few plastic house door shims behind my box where i was screwing to the house to allow air flow after rains/watering
Very nice, I plan on making one for the back of my house. I have a question though, I read all of the comments and no one asked this so here it is...You didn't make any holes on the bottom for the water to drain away? is there a reason why not? thanks
Right around the 7 min mark in the video I'm drilling holes in the bottom lol
@@LazyLabAcres I don't know how I missed that lol, thank you for answering my question though.
How did you hang the box,with hanging brackets or did you screw pice of wood on the window frame with a 45 ct. And hang box on that?
I didn't install these
I came across your channel because of it's name. I don't know if you are familiar with the Adirondacks in New York State but it's referred to the area inside "The Blue Line"! I glad I happened upon your channel either way keep up the great work and I appreciate the tip on using sawdust and glue for a color match filler!
Thanks,
DC
Hey nice job !! How much something like that will cost ?
What weight of box or how big before you suggest finding studs instead of drilling into the sheath
I can't really advised since I did not install them
These are great...I am definitely making these. Thank you for sharing!!! ❤️
Thank you for the support!
Trim is to thick and box is to shallow to support flowers, how did the flowers keep?
just found your channel. really enjoying it. i just made my first cornhole set and you sure made it look easy! wish i had seen your video beforehand but sometimes you gotta learn by doing. just curious - did you go to umass? cheers man, great content.
Thanks for the support! I'm a UNC Chapel Hill grad. My sister went to UMass
What is that little tool with a level and small ruler called?
Found your channel from the Cornhole build and subscribed. Thanks for the videos man, nice work!
Thank you for the support!
Awesome
Thank you!
Liked alot
Do you do special orders?
Is this all 1x6?
Do you have a supply list? I would like to take it to the store with me. Thank You.
I don't
How did you mount your boxes? They look amazing, by the way!
The homeowner mounted these and just screwed them into the side of the house. Thank you for the support!
Nice video 👍
Thanks for watching!
Nice job! Love working with cedar..
It smells soooooo good!
رائع.
To remove the excess glue are you using a dry rag or water, or some kind of solvent?
typically a damp shop towel
How do you mount them under an outside window?
The customer installed them so I'm not sure what they used
As nice as they turned out you definitely should next time counter sink the screws and fill them like the nail holes to take the elephant on the planter boxes out of the equation. Just saying nice job other than that, especially after you put your finishing on there they really stuck out like a sore thumb. 👍 good work though
4:22 you talk about stainless screws using them so you don’t get bleed through why not use them on the Trim nails .
I notice on a new house build they didn’t use stainless on Facia trim and you can see rust on the white paint already house is not even a year old.
Million dollar home on the ocean don’t get it .
I say if outside stainless more money but less come backs.
That's right
He's never had a brad nail hit a knot and shoot through the side into his finger.
Nope but I've had a drill bit go through my finger
Lazy Lab Acres, LLC guys on the crew make me nervous when they're framing and don't keep their hands out of the way. Many times I've seen a stray nail pin a hand to a 2x. It makes me cringe watching. I'm no saint... I cut a thumb off on a table saw. Luckily they were able to reattach... without the knuckle.