Ok, yeah I was looking at that kit. Apparently ececonic cycles is making a kit that's supposed to have some pretty good performance should I wait or just pick up that kit?
It goes 45 but it can't be used on larger bikes. So if you grabbed a kit from econic and it was like a kunray vr5 and later wanted to move all this stuff to a full size frame you could. But this kit specifies not to be used on larger bikes. This is my first dirtbike and I've only gotten it to 24 before my room to run was gone. Gonna do some urban testing Monday when my camera comes in
@ivancool_pro7187 make sure your using the proper spacers on the wheel so the rotor isn't hitting the fork and the brake will have a small bracket that I'd black and curved it bolts on the brake caliper and slide it on the rotor until the two longest bolts can fit through the screw holes on the fork and curved bracket piece. Also u have to adjust when it bites so it grabs earlier or later depending on your preference
How fast does it go
I've gotten it up to 38 but I weigh 215 lbs so if your lighter your faster
Electro and co mototec kit
Ok, yeah I was looking at that kit. Apparently ececonic cycles is making a kit that's supposed to have some pretty good performance should I wait or just pick up that kit?
How fast does that kit get it to go?
It goes 45 but it can't be used on larger bikes. So if you grabbed a kit from econic and it was like a kunray vr5 and later wanted to move all this stuff to a full size frame you could. But this kit specifies not to be used on larger bikes. This is my first dirtbike and I've only gotten it to 24 before my room to run was gone. Gonna do some urban testing Monday when my camera comes in
@@Geengears870 Alright, Thanks!
Hey! what parts did you get to finish off the bike?
electroandcompany.com/collections/ebox/products/mototec-funbikes-to-etm-conversion-kit
did ur ebox come without the front forks and handebars also uninstalled
Yes it did make sure you put the larger spacer on the same side as your brake rotor. I switched them last minute and brakes wouldn't disengage
@@Geengears870my triple tree (the thing that holds the front forks) is misaligned and the forks wont go through any advice?
I used a flat head and very slowly stretched it until it slid up idk if it's a defect or not but be careful it looks cast.
@@Geengears870 i really dont know how to install these front brakes any help?
@ivancool_pro7187 make sure your using the proper spacers on the wheel so the rotor isn't hitting the fork and the brake will have a small bracket that I'd black and curved it bolts on the brake caliper and slide it on the rotor until the two longest bolts can fit through the screw holes on the fork and curved bracket piece. Also u have to adjust when it bites so it grabs earlier or later depending on your preference
What controller is it called and did u get the 72v or 48v electric and co kit
It's the mototec kit from electro and co. U could build your own from econic cycles the new kunray is peak 10 kw that and a fardriver would work great
Thank u can u post more on it
Doing a full review in a few days needed to ride on it more got a video up today camera isn't the best but it's some more info
😭😭😭😭😭😭😭