the settings are basically same in almost all types of fibre optic modems, send the screenshot of your setting in our telegram/instagram/facebook pages and we'll figure out the mistake and guide you with the setup Subscribe to the channel as well😊
Hi can we do the bandwidth control of the devices which are connected to this OPTILINK OP-XONT-71110N router, on the basis of MAC address or any other way? If yes then kindly let me know.. if not then which fiber modem/router should be purchased.. Kindly help.. Thanks a lot.
You can set QoS priority rules, but not that effective. 5ghz supported modems have the function. Also, normal tplink, D-Link routers have this function. You can bridge them with the existing device
@@TechwindTw Hi thanks a lot for the timely response.. Does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
Hi bro this broad band antenna was broken bro. What I have to do bro? If antenna separate available or I need to purchase new router bro. Please tell me bro?
I have optilink op xont 71000, and when i connect it to my computer with ethernet cable and then when i try to open chrome it’s not loading. Please help someone
Read documentation of Panasonic whether it supports the protocol which bsnl uses.. I've heard that some Panasonic phones don't support even old analog bsnl line.. If may not be the case always..do a cross check for the condition of the phone also. Kindly subscribe to the channel 😊
Sir I m using Bsnl ftth internet and voice. I can't receive calls on ftth phone after 2 hours. The phone goes in to deep sleep. After I dial some number it again wake up and then only it receive calls. Again deep sleep after two hours. How can this be solved. I have same optilink modem and optilink user interface as shown in the video. Thank you for the video
Issue in modem/issue in firmware/issue in landline these are the possible reasons. message us through Instagram, we'll figure out the issue and try to solve it, Kindly subscribe to the channel😊
which means , either vlan id is wrong or your device maynot be linked to the operators device in his office. check with that too.. kindly subscribe to the channel... 😊😊
This is xpon device, It automatically switches from GPON/EPON depending on the input signal. You don't have to do anything. Kindly subscribe to the channel😊
@@hariprashad8985 Go to cmd. Type ping your gaming server ip -f -l packet size Eg, ping 61.1.1.1 -f -l 1460 Repeat it by changing the mtu value by 5, 1400, 1405 , 1410, 1415 etc.. In one size, it won't fragment, and without loss, it'll ping perfectly. Use that mtu size in wan.. Your gaming will be best. If you're unable to do, contact us through SM platforms. Please, subscribe to the channel😊
you can reset it by pressing the reset button.. But , make sure you know your vlan id, pppoe[internet] username and password.. else, you'll face trouble in configuration.
In first time configuration, the UI prompts to change password mandatorily... So, your vendor/the one who configured your modem must have changed it...
![Syrotech EPON ONU[1GE+wifi] - Railwire FTTH internet configuration and ping test..!!](http://i.ytimg.com/vi/PuW3p__agwI/mqdefault.jpg)
![Syrotech EPON ONU[1GE+wifi] - Railwire FTTH internet configuration and ping test..!!](/img/tr.png)
If you find this video useful, atleast drop a like 👍.
And also Subscribe ❤️
Bro atlast in device management section we have to give reboot or save. Then only it would work
I could not able to success in voice configuration in NEPSTEC XPON ftth modem.kindly suggest.
the settings are basically same in almost all types of fibre optic modems, send the screenshot of your setting in our telegram/instagram/facebook pages and we'll figure out the mistake and guide you with the setup
Subscribe to the channel as well😊
Plz tell me when i configuration the rotor its dosent show new adding
Hi can we do the bandwidth control of the devices which are connected to this OPTILINK OP-XONT-71110N router, on the basis of MAC address or any other way? If yes then kindly let me know.. if not then which fiber modem/router should be purchased.. Kindly help.. Thanks a lot.
You can set QoS priority rules, but not that effective.
5ghz supported modems have the function.
Also, normal tplink, D-Link routers have this function.
You can bridge them with the existing device
@@TechwindTw Hi thanks a lot for the timely response.. Does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
planning to buy a new xont router optilink or syrotech , which one is better ?
both are almost same,
syrotech has better customer support
Hi bro this broad band antenna was broken bro. What I have to do bro? If antenna separate available or I need to purchase new router bro. Please tell me bro?
I don't know if it is available or not .
If wifi is working , it's fine.
If not , contact the vendor who provided you the modem
Can we use this modern for BSNL Broadband
yes, you can
@@TechwindTw is this DSL modem
no, its fibre optic modem..
I have optilink op xont 71000, and when i connect it to my computer with ethernet cable and then when i try to open chrome it’s not loading. Please help someone
bro, go to network settings and change the ip v4 settings and check Obtain ip address automatically , then you can
Bro the wiif isn't connecting to the tv is there any solution for this problem pls reply ❤
Does it support both epon and gpon
yes
Thanks a lot
If you find this information useful, kindly Subscribe 😇
Uniden cordless is working on voice but Panasonic CORD LESS NOT WORKING ON FFTH CONNECTION not working
Read documentation of Panasonic whether it supports the protocol which bsnl uses..
I've heard that some Panasonic phones don't support even old analog bsnl line..
If may not be the case always..do a cross check for the condition of the phone also.
Kindly subscribe to the channel 😊
Thanks for your response. Checked cordless is working on bsnl land line.but not on ffth.
after using this some apps like telegram, twitter not working others working fine.any solution?
Change the mtu value in internet wan from 1492 to 1460.
If it doesn't work, try 1400, 1442
Bro intha routerla port forwarding panna mutiyuma. If yes how
My Optilink model is 71000N. Yesterday the REG light started blinking and till then showing no internet.
I can't connect google chromecast with this router. what could be the issue?
What is original pre shared key password of optilink router?
12345678 is the default one for most devices..
You can find it at the backside of the device
Sir is default password of tp link router???
optilink fiber router op-xt71000n is best or not which Year model??
yes, it is good
What's its price
Sir I m using Bsnl ftth internet and voice.
I can't receive calls on ftth phone after 2 hours.
The phone goes in to deep sleep.
After I dial some number it again wake up and then only it receive calls.
Again deep sleep after two hours.
How can this be solved.
I have same optilink modem and optilink user interface as shown in the video.
Thank you for the video
Issue in modem/issue in firmware/issue in landline
these are the possible reasons.
message us through Instagram, we'll figure out the issue and try to solve it,
Kindly subscribe to the channel😊
@@TechwindTw thks sir for sharing info
After confirmation I won't get wlan ip address .and internet is not connected
which means , either vlan id is wrong or your device maynot be linked to the operators device in his office.
check with that too..
kindly subscribe to the channel... 😊😊
How to clarify that
Thank you
can any one tell how do i connect my optilink router with airtel xstream fiber router please
Gpon to epon how plz tell
This is xpon device,
It automatically switches from GPON/EPON depending on the input signal.
You don't have to do anything.
Kindly subscribe to the channel😊
Bro when click login it telling bad password
When we configure for the first time, the interface prompts to change the password.
So, ask the person who configured it for the new password
How to change the ip address in this router
It always showing wrong pass when I am trying on android
During 1st time configuration, the UI prompts to change password.
Your vendor/LCO must've changed it..
Ask him for the changed one
Could you please tell me the default WPS pin for Optilink Router?
Try 12345678 ,
You can alternatively login to your modem and find it
Network status down bata raha hai
Need best mtu low ping for games
try 1460.. most commonly used
you can alternatively ping your gaming server and check for packet size, and find the correct mtu
@@TechwindTw i tried so many times it not stable so iam asking you bro ...can you suggest the best mtu for low ping
@@hariprashad8985 Go to cmd.
Type ping your gaming server ip -f -l packet size
Eg, ping 61.1.1.1 -f -l 1460
Repeat it by changing the mtu value by 5, 1400, 1405 , 1410, 1415 etc..
In one size, it won't fragment, and without loss, it'll ping perfectly.
Use that mtu size in wan..
Your gaming will be best.
If you're unable to do, contact us through SM platforms.
Please, subscribe to the channel😊
Bro couldn't login with default username and password. Bad password error varuthu
modem 1st time configuration panumbo , password change panna kaekkum, so unga operator change pannirupanga... ask him
@@TechwindTw no support from bsnl. Is there anyway to reset it ?
you can reset it by pressing the reset button..
But , make sure you know your vlan id, pppoe[internet] username and password.. else, you'll face trouble in configuration.
@@TechwindTw The technician from bsnl has given a landline number, password for wifi, vlan no. Will that be enough bro
@@TechwindTw thanks bro for replying
Bad password issue
In first time configuration, the UI prompts to change password mandatorily...
So, your vendor/the one who configured your modem must have changed it...