Thank you so much for doing this video. It made it so much easier. I did have a little trouble orientating the plow spacers. With the chamfer but think I got it figured out. Cheers
Great video ordered promoting snowplow kit my 2019 can am defender only problem with mounting plate no holes in frame for the two clips. Your thoughts thanks
I really appreciate this video! Huge help getting me all set up on my Defender HD10 Limited. Thanks Very Much! I ran into an issue with the long mounting bolts that go through the frame. There are no holes in the frame to run the bolts through. I'm having to just run the four corner bolts for the mount. Do you know of any reason why can-am might not have these holes drilled on my model? I even took off the bracket completely and there are no holes in the frame rails.
@@Maxsmotoshop Thanks for the reply. My defender is a 2021. I'm going to drop the bracket and just double check to make sure. If the holes aren't there, i'll just drill them as you mentioned. Maybe i'm loosing it and just did the total opposite of what you said on the video. Thanks again for putting this together!
Great instructions. The part number for the blade doesn't seem to match the one in the video. I would like a straight 72" blade I think. Also does the new fairlead come with the kit?
Appreciate you doing this from Northern Wyoming, thank you. Got it all done easily.
I’m in Canada, British Columbia and I’m glad you found it helpful👍
Thank you so much for doing this video. It made it so much easier. I did have a little trouble orientating the plow spacers. With the chamfer but think I got it figured out. Cheers
Glad it helped!
Great job, Max. Thanks for sharing.
My pleasure!
Can-am aced the mounting system, but then puts shoes on the plow that wears out really fast, like two snowfall’s
Great video ordered promoting snowplow kit my 2019 can am defender only problem with mounting plate no holes in frame for the two clips. Your thoughts thanks
I really appreciate this video! Huge help getting me all set up on my Defender HD10 Limited. Thanks Very Much! I ran into an issue with the long mounting bolts that go through the frame. There are no holes in the frame to run the bolts through. I'm having to just run the four corner bolts for the mount. Do you know of any reason why can-am might not have these holes drilled on my model? I even took off the bracket completely and there are no holes in the frame rails.
I’m wondering what year your defender is and make sure your bracket is not backwards probably wouldn’t be too hard to just drill those holes though
@@Maxsmotoshop Thanks for the reply. My defender is a 2021. I'm going to drop the bracket and just double check to make sure. If the holes aren't there, i'll just drill them as you mentioned. Maybe i'm loosing it and just did the total opposite of what you said on the video. Thanks again for putting this together!
What was the fairlead part number? And can it be used on a Commander? Thank you
It came with the mount
Put together the brand new CRF 110 of 2023. We’re all waiting to see it.
Great instructions. The part number for the blade doesn't seem to match the one in the video. I would like a straight 72" blade I think. Also does the new fairlead come with the kit?
Different blades are definitely available to set up should be basically the same. A fairlead is needed. It usually comes with the mount kit.
thank you for doing this...
No problem 😊
Thank you, did you order directly from Can Am or an aftermarket blade?
Straight from Can-Am
Found that my winch line didn't fit either. Odd that the instructions don't let you know this.
👌
👍