A lot of people complaining in the comments. I think it looked awesome. Watching this video is gonna help me install a separate grille I bought off Amazon. Great tips.
A LAT OF WORK HOURS PROJECT! I made my own mesh grill rivet for a 1st gen Tacoma, 1st I remove the grill and cut the center part, then Draw TOYOTA letters, cut them out of 16 gauge, sand them, paint them. then I draw the frame for the rivets and cut it out of same steel, and did the 42 holes for the rivets, then I sand it and paint it. after all that I couldn't find the rivets anywhere, so I made my own using flange bolts, I cover dem with clear coat. I cut out the mesh part and installed all my rivet/bolts around holding the mesh at the same time, then I put the letters, secured them with plastic ties and glued using a product named goop. then I did the 3 amber raptor lights installation and at the following day I put the new mesh grill back to its place, and put the whole part back to my truck installing the wiring to the side marker lights. around 40 or 45 hrs labor. and around 100 bucks on material. will cost 775.00 make it and also the installation. ( I know, who will pay that?)I forget to mention that I painted the chrome and installed the mesh on the little triangles as well. and now if I do another one I think I can do it in less time since I have the templates for the steel and mesh cuttings, and the idea how to make the rivets out of bolts witch is better then those plastic ones .
When I epoxy the drywall anchors and put the screws in, it breaks off since the anchor wants to expand. Any suggestions? Also what adhesive did you use for the corners?
We had the small grey anchors break the same way you described. So we only used the white ones that do not expand. Also, be sure to let the epoxy cure.
I am wanting to do this to my 2006 limited 4runner. Looks like grill is about identical to another. I was curious if the mesh and letters would fit my grill fine from Bullet Proof Fabricating? I really like the way the mesh looks.
+trent allen That grill looks like it might be just a little smaller, you would have to trim the mesh down more than I did. The letters should fit fine. That would look cool on the 4runner!
How come BP fabricating's guide has the mesh flush with the outer edge of the grill? Their guide seems much simpler than the process you went through. Did you see it?
+happy543210 How do you figure? An OEM grill is $50. And when I sold this truck, the dealer gave me top dollar and one of the first things they said was, I love that Grill!
+happy543210 a whopping $84 for chrome. Either way, it didnt hurt the value at all. www.stylintrucks.com/parts/replacement_direct_fit_grille_shell_and_insert_assembly/repgr38548/replacementt070139-.aspx?scid=gglpla&gclid=CIiSlJSt9ssCFdgJgQod8_wIeA
+happy543210 How do you get that number? Two screws, two tabs, and you pull the grill out to pop the new one in. It takes less than 5 minuets. And again, based on our experience selling this truck, it made them want the truck even more.
Hmm. That is the best way we came up with and let them dry for a good amount of time. A few did break off, but more glue and some weight on top for drying helped. You could try to use caulk, use clear and see if that will bond it. Hope this helps.
the finished product is great but jesus I don't know if I can justify this much work for just a grill lol. Does anyone know of a company that sells already done mesh grills?
Jason 56 It is a lot of work, but we enjoy doing projects like these and having unique parts. Bullet Proof Fabricating sell the complete kit for 2012 and newer tacomas, its $470. Doing the way I did was only $140 and some paint, so the time is worth it.
CaliforniaNativeAngler haha that would be cool. But I definitely dont have the time to do another 20 hour job! It does take a lot of time to do this grill, but it is very do-able.
This was the original grille from them back in the day. They now come pre made and you simply replace the old one. Have this style on my 2017 tacoma now too!
+MrDBOne Au (mrdboneau) I wouldn't say it's an average look..It's very rare to see a Tacoma with lettering in the grill like this, I've only seen one other. It is a lot of work, but had a great turn out.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
A lot of people complaining in the comments. I think it looked awesome. Watching this video is gonna help me install a separate grille I bought off Amazon. Great tips.
Glad I could help! I love the look of it, it was a fun project to work on!
A LAT OF WORK HOURS PROJECT!
I made my own mesh grill rivet for a 1st gen Tacoma, 1st I remove the grill and cut the center part, then Draw TOYOTA letters, cut them out of 16 gauge, sand them, paint them. then I draw the frame for the rivets and cut it out of same steel, and did the 42 holes for the rivets, then I sand it and paint it. after all that I couldn't find the rivets anywhere, so I made my own using flange bolts, I cover dem with clear coat. I cut out the mesh part and installed all my rivet/bolts around holding the mesh at the same time, then I put the letters, secured them with plastic ties and glued using a product named goop. then I did the 3 amber raptor lights installation and at the following day I put the new mesh grill back to its place, and put the whole part back to my truck installing the wiring to the side marker lights. around 40 or 45 hrs labor. and around 100 bucks on material. will cost 775.00 make it and also the installation. ( I know, who will pay that?)I forget to mention that I painted the chrome and installed the mesh on the little triangles as well. and now if I do another one I think I can do it in less time since I have the templates for the steel and mesh cuttings, and the idea how to make the rivets out of bolts witch is better then those plastic ones .
Wow that's pretty cool! This was a pretty fun project to do on the Tacoma!
I like to do mods on my single cab 2007 Tacoma but this isn’t it. But to each is own. Good job bro
This was a fun project! TacomaBeast, Rouge Off Road and BPF have a lot of Tacoma mods. Check it out!
Now that's perfection looks really good
Thanks! This was a fun project!
Looks good! Clever ways of completing your project. The rights tools sure make it easier.
Thanks! That multi tool really made it easy
Looks good but I would have blacked out the chrome too. But I like black everything... 😁
Yea there was so much chrome on this truck, I just left it...but I blacked out my 3rd gen tacoma! Much nicer truck, but I miss this one.
you did good job but I don't like how it's all glued together. seems like over time everything is going to fall apart.
When I epoxy the drywall anchors and put the screws in, it breaks off since the anchor wants to expand. Any suggestions? Also what adhesive did you use for the corners?
We had the small grey anchors break the same way you described. So we only used the white ones that do not expand. Also, be sure to let the epoxy cure.
Nice work!
Thanks! This was a fun project to do on the Tacoma!
Friggin awesome man. Looks great
+Austin Johnson Thanks! It was a fun project for sure!
I am wanting to do this to my 2006 limited 4runner. Looks like grill is about identical to another. I was curious if the mesh and letters would fit my grill fine from Bullet Proof Fabricating? I really like the way the mesh looks.
+trent allen That grill looks like it might be just a little smaller, you would have to trim the mesh down more than I did. The letters should fit fine. That would look cool on the 4runner!
Awesome job! I want to do this to my 02 Tacoma and install the Amber LEDs too
That'd be cool!
great job, like it too much!
Thanks for the suggestion. I will try the white ones. What was the adhesive you used for the corner pieces?
We just used silicone caulking. Liquid nails - construction adhesive. Haven't had any issues with it.
Bad ass job, U guys are very good.. want to do my 2015 TDR.
Thanks! That would look sweet! With a different grill style you should have less work to do for that project!
Where can you get one that says Tacoma ALready assymbled
ebay. search as "heritage grille"
I found one on that link for my 15. It’s like $600
Everything came in the kit from their website. www.bpfabricating.com/
After you bondo'd the grill did u take off those little plastic pieces that you glued on? Thanks!
Anything glued stayed in. They add to the structural integrity
what did shipping cost???
Can't remember. But you can do a quote on their website. www.bpfabricating.com/
good job where can i get the lyrics
Link please
www.bpfabricating.com/
This kit is on BPF's website!
I think this looks amazing but I can’t find one for a Nissan Frontier anywhere
I've never looked for one but you might have to build it custom for one out of similar parts.
The link to the website where the grill parts can be purchased is in the description above...BPFabricating.com
How come BP fabricating's guide has the mesh flush with the outer edge of the grill? Their guide seems much simpler than the process you went through. Did you see it?
I checked their website, didn't see another guide for it, but they do sell the grill pre-made if that is what you are talking about.
hey is a nice job so I have an cuestion for yuo where buy the letters and what size the letters thankyou
+Miguel Herrera I bought the letters from Bullet Proof Fabricating. Not sure on the size, but I think they are close to 4 or 5 inches.
Thankyou
excellent work. love it
+whelen9m Thanks! Be sure to check out the time lapse of the project! th-cam.com/video/mhzhiz1kGfI/w-d-xo.html
nice work. you just depreciated the value of the truck by a thousand dollars.
+happy543210 How do you figure? An OEM grill is $50. And when I sold this truck, the dealer gave me top dollar and one of the first things they said was, I love that Grill!
Honda4RideRed
a junkyard grille might be 50 dollars, not a brand new one!
+happy543210 a whopping $84 for chrome. Either way, it didnt hurt the value at all. www.stylintrucks.com/parts/replacement_direct_fit_grille_shell_and_insert_assembly/repgr38548/replacementt070139-.aspx?scid=gglpla&gclid=CIiSlJSt9ssCFdgJgQod8_wIeA
Honda4RideRed
it'll take a least a thousand to remove that nasty shit and put everything back the way it used to be.
+happy543210 How do you get that number? Two screws, two tabs, and you pull the grill out to pop the new one in. It takes less than 5 minuets. And again, based on our experience selling this truck, it made them want the truck even more.
Are you installing a grill insert or making a 4th grade science project? Looks great in the end, but that won’t hold up to the elements.
That grill held up just fine. That's the only way to make the grill like that.
Lol what a pain in the ass
LOL it was a fun learning experience tho. Cool project
is it possible for the landcruiser 2013?
BPF might have a grille for that. www.bpfabricating.com/
Do you have a lift on the truck pictured in the video?
+Fatman yup, 3in lift
Any stronger way on securing the mesh? I've had 4 of my drywall anchors come off now..
Hmm. That is the best way we came up with and let them dry for a good amount of time. A few did break off, but more glue and some weight on top for drying helped. You could try to use caulk, use clear and see if that will bond it. Hope this helps.
Bros FOURR Speed yeah I was thinking just a different type of adhesive. Thanks!!
Im getting ready to start this project, how is it holding up so far. Any issues with the letters falling off
Patrick Andrews Nope, we used 3M and they have held up just fine.
Ok thanks, your guyses video is awesome and has definitely helped with this project. what type of caulking should I use
Patrick Andrews use black silicone coulking, that way if there is any over spill it will blend in.
Ok thanks again
Good job. Very nice work. Maybe you should do this for extra money. Keeps you busy. Good luck buddy
Thanks, it was a fun project. It's definitely a lot of work.
what dimensions of that mesh are you using?
No clue. Whatever came with the kit lol. www.bpfabricating.com/
You on TacomaWorld? Nice work
crommy927 No I'm not and thanks!
where l buy the grill
Everything came in the kit from their website. www.bpfabricating.com/
you should paint over the chrome
It's hard to paint over chrome like this. But I now have a 3rd gen TRD and it has a body color grille
what caulking did you use on the metal mesh for the triangle pieces?
Just normal silicone
Bros FOURR Speed
Where can i get the mesh and the leter
I got all this from BP fabricating!
How do You get to The good lever?
What's the good lever?
and the letter where l buy
Everything came in the kit from their website. www.bpfabricating.com/
badass
Im dizzy, you move the camera too much too fast for the focus to even work
No Thanks !! 🤔🤨
where l find the grill
BP Fabricating is where I bought the parts, you can also buy the completed grill too.
the finished product is great but jesus I don't know if I can justify this much work for just a grill lol. Does anyone know of a company that sells already done mesh grills?
Jason 56 It is a lot of work, but we enjoy doing projects like these and having unique parts. Bullet Proof Fabricating sell the complete kit for 2012 and newer tacomas, its $470. Doing the way I did was only $140 and some paint, so the time is worth it.
honda4ridered I'd have to agree with you. I'll do it eventually :)
Better lighting next time
Man this was an old video! I have a 3rd Gen Tacoma now and have probably 200 videos on it. Hopefully Ive improved
@@BrosFOURRSpeed haha nice dude I will check your channel out . And I am sure you have improved lol
anybody know where to get this already done?
I think you can order it strait from BP Fabrication
I'd do this but just put a blacked out Toyota badge back on it or leave it clean.
+crephotos You can just buy the mesh and add what ever logo you want. It will save you some $ too.
holy crap u gotta be a rembrandt of plastic..........i would still be stuck on step 1 removing the 2 tabs to get the grill off
I just went ahead and bought the whole damn grille for $600. Fuck that cutting shit lol
Dude jus lemme send you my grill and the materials lol I'll pay you for the labor
CaliforniaNativeAngler haha that would be cool. But I definitely dont have the time to do another 20 hour job! It does take a lot of time to do this grill, but it is very do-able.
I thought it comes in one solid piece wtf...
I think now a days you can buy these as a full kit. But this was a while ago when the grille was new and just was a kit. www.bpfabricating.com/
Too much work. They sale grills ready to install
This was the original grille from them back in the day. They now come pre made and you simply replace the old one. Have this style on my 2017 tacoma now too!
Wish I'd have seen this before buying this grill. Def wouldn't have bought it.
It was a bit of work for sure! But a fun learning experience!
Too much movement I'm getting dizzy!
We were still leaning how to film back when we did this lol
wtf, individually installing each letter? what a joke
It was pretty easy to do. My 3rd gen Tacoma has one of their new grilles. The kits come pre made now
Way Way to much work
Haha yeah it was some work! Very fun tho! I now have a 3rd gen Tacoma and have a lot of mods on it!
fawk thats a pain in the ass
It was a big project, but I love how it turned out for the Tacoma!
Way too much work for just an average look...
+MrDBOne Au (mrdboneau) I wouldn't say it's an average look..It's very rare to see a Tacoma with lettering in the grill like this, I've only seen one other. It is a lot of work, but had a great turn out.
Stupid auto correct. Meant hood lever
There are two spots, either go inbetween the grill or between the hood and grill..with this mod, now I go between the grill and hood.