LoDi-Con connection to ESU ECOS No10

This Video shows you how to connect the LoDi-Con to the ESU ECoS System. We use an external router to give us a WiFi connection for the LoDi-Con. Due to the fact the ECoS does not have a wifi built in you have to do this.
We hope this is helpful as and shows you how easy it is to use the LoDi-Con with the ESU ECoS. The LoDi-Con will work with many other system that have a network WiFi connection. The following systems can be use Z21, Lenz, DR500 and the CS3 from Marklin.

[@hovermotion]

Thanks James , your info solved my problem with another controller glitch..

[@DCCtrainautomation]

What was that buddy?

[@hovermotion]

@@DCCtrainautomation I thought it solved the glitch but not so..I have a Roco WiFi 10835 - Z21 Multimaus connected to the Z21 via the Esu ecos sniffer port the z21 works fine its the main master ecos command station that's glitching on the speed and triggering functions on the loco...it's a bit hard to explain..
I may do a video to see if anyone else has this problem .

[@ChadwickModelRailway]

You didn’t add the outro at the end.

[@DCCtrainautomation]

i must not forget sorry.