You all probably dont care but does any of you know a way to log back into an instagram account? I was stupid lost my login password. I would love any assistance you can offer me.
Video just popped up, i appreciate that you taking measurements unlike other diy amplifier makers! Big positive checkmark for you, i also used to do and have one of the amplifier like this, except one 40watt 16R resistor and with a BJT transistor, it was actually good, it was on 40Volt and 1.48A load, it have multiple transistors, it gave out like 9volts on 8ohm load and it was 10watts "P=UxU/R=2,24Vx2,24V/4Ohm=1,25W" I would say that the curve is ok till 2.06volts, so its: (2.06x2.06)/4 which is 1.06Watts. but for 10%thd im sure it can do the 1.25Watts. :)))
You can do this NP-100v12? Is a class A hibrid headphone amplifier with 12au7 (ecc82), Lm317 and Irf510! I make this amp and I love he sound clean and warm!
This class A amplifier has low efficiency, about 10-15%. For a subwoofer, a bad decision. It should be collected only if you are a connoisseur of high-quality sound.
P=UxU/R=2,24Vx2,24V/4Ohm=1,25W
1.25W or 125W??🤔
@@Grimes_68 1,25W
schematic diagram pls
You all probably dont care but does any of you know a way to log back into an instagram account?
I was stupid lost my login password. I would love any assistance you can offer me.
@Hugh Gianni instablaster ;)
I'm so happy I found this channel...😃
It's fun to play around with minimal discrete circuuts.
Beautiful work, dude! Really nice! 😃
Video just popped up, i appreciate that you taking measurements unlike other diy amplifier makers! Big positive checkmark for you, i also used to do and have one of the amplifier like this, except one 40watt 16R resistor and with a BJT transistor, it was actually good, it was on 40Volt and 1.48A load, it have multiple transistors, it gave out like 9volts on 8ohm load and it was 10watts "P=UxU/R=2,24Vx2,24V/4Ohm=1,25W" I would say that the curve is ok till 2.06volts, so its: (2.06x2.06)/4 which is 1.06Watts. but for 10%thd im sure it can do the 1.25Watts. :)))
Nice heater ;)
what is the wattage maximun of the speaker...???
What is the output power???
You should make a version more powerful.
A recommendation when you test it, the speaker have to be in an acoustic box for better sound.
Severino Alcantara 😉th-cam.com/video/vXNsR_O0p94/w-d-xo.html
You can do this NP-100v12?
Is a class A hibrid headphone amplifier with 12au7 (ecc82), Lm317 and Irf510!
I make this amp and I love he sound clean and warm!
8:19 second order distortions coming in by 8:48 second and third order heavy..third order usually sounds really bad
Research and Build 🤔 th-cam.com/video/vXNsR_O0p94/w-d-xo.html this is my version of the same pattern ...
@@lucacorso_audiosystem Please send me yours version. Schematic and project. Thank you.
very nice hope that you can make a hi wattage on it i really want that happen :)
Put enough solder?
I make this amp and working very nice
The hiss!
2nd viewer✌✌and first liker+commenter
Nice Video
Very hot resistive load !.
Two mono block amp's @ 2.5 watts Pure Sound, now how do we make a single 2.5 watt for a small sub-woofer? Those resisters are huge.
This class A amplifier has low efficiency, about 10-15%. For a subwoofer, a bad decision. It should be collected only if you are a connoisseur of high-quality sound.
@@AkaKasyanEng I am and would love to have a build with that kind of sound quality
MrBrymstond th-cam.com/video/vXNsR_O0p94/w-d-xo.html 😉
7В пик to пик.
Tôi rất muốn 2 chiếc. 2sc5200 classA. Thank ad
tube like distortion.
Add more MOSFETs in parallel to increase the wattage. This would require more voltage and current supply
That's not how single ended amplifiers work it's not that easy
Plez upload power amplifire 200w using output transformer....
Please give me circuit diagram