Mazda 6 Front Bumper Removal Guide How To GH1 2007-2012
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Please subscribe! www.fixit4free.com www.cleverprodu... How to remove the front bumper on the 2007-2012 Mazda 6.
You will need a cross head screwdriver.
8mm socket
10mm socket
Bojo Tip 5 and Tip 9.
Start by removing the grille, the rubber bungs are hidden trim clips that have a small slot on them. You may be able to stick a flat head screwdriver in but I find that removing the rubber from the top and using a Bojo tool to open is easier. Remove the centre 2 trim clips using Bojo Tip 5 and remove the 2 cross head screws. The grille can now be removed.
Underneath the car in the centre you need to detach the front under tray. This has 8 10mm bolts however you only need to remove the front 4 to allow the tray to drop down. Once removed there is a trim clip in the centre to undo and the tray will drop down.
In the wheel arches there is 1 8mm screw to remove and 3 trim clips than can be gently undone with a cross head screwdriver and pulled out.
Underneath the front corners of the bumper there are 4 8mm screws to remove to detach the corner under trays.
The bumper will now be loose but you will need to take care when detaching the sides as on the drivers side there is the pipe for the headlight washers to remove and on the passenger side you need to remove the wiring for the fog lights.
With the sides loose and the components disconnected the bumper will only be held on by a small tab next to each headlight. This can be undone by inserting a slim Bojo tool such as Tip 9 or Tip 1.
Thanks for watching.
www.fixit4free.com
please more Mazda 6 content, there is very few content on 2nd gen Mazda 6. I think they don't get the love they deserve
Hi Xahid, I have quite a few vids up but don’t have the car anymore, subscribe and see my playlists. Thanks!
What do you need to know? I know this car inside & out Still own it Also it's up to a 2013 in America..My car is a generation two 2013 Mazda six same exact car
That's brilliant mate, thanks so much. I need to get the aircon condenser accessible for the specialist to change it and this will save a lot of the labour cost if I prepare myself.
Thanks for taking the time to do this .
Brilliant thanks man, intercooler bust a vane so need to take the bumper off to get at it. Cheers!
Excellent video mate. Loads of help and
man thanks a lot for this video. I've been trying to figure out how to get to the headlight assembly. i want to see why one headlight is way brighter than the other. I'm guessing bad ground cable. thanks
You probably dont care at all but does anyone know a way to log back into an Instagram account?
I stupidly lost my login password. I would appreciate any assistance you can give me
@Casey Tatum instablaster ;)
@Finnegan Edwin thanks so much for your reply. I found the site through google and I'm trying it out atm.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Finnegan Edwin It worked and I actually got access to my account again. Im so happy!
Thank you so much you really help me out :D
@Casey Tatum You are welcome xD
I need to check out my washer fluid sensor because it's always measuring the reservoir at half capacity, can I just jack it up on the right side and check from there?
This is very helpful, thank you.
You're very welcome!
Nice one
where can I get that bumper
Hi, very good video. Can you tell me if it is an easy job to remove the intercooler once the bumber is off?
Hi Stephen, sorry I have no experience removing the intercooler.
@@IAMASPANNER thanks for your reply.
Hi please i neeed the bumper .cause mine is all brocken
Danke gut gemacht
You absolute legend. THANK YOU!!!!
After bumper removal, can i remove easily front lights aswell?
Hi Antti, yes, see my other videos for the complete job including the lights.
Tolly Swift Can you link it ?
How to change Mazda 6 HID Bulb remove Headlight and Front Bumper Removal th-cam.com/video/iYxTJCy4rtI/w-d-xo.html
The most tricky part is cutted out :( The center part is not easy removable. Can you post video on how to remove it properly?
Car is long gone, sorry if I didn’t make it clear enough in the vid, hope you get sorted!
also 2013 in usa
Please reply what year and versions of the Mazda 6 fit the 2010 what bumper do you have and where did you get that from having trouble finding other bumpers
This is just the bumper that was fitted to the car. The model ran from 2007 to 2012 so any of those years should fit.
depends what area of the world you're at... in America this body style was made from 2009 -2013 I own a 2013 ..i know the car pretty much inside out if you need to know anything they only sell one or two aftermarket bumpers that look totally different.. So yeah you can get a different looking bumper but it's not much different,, You can also add a Subaru lip around the edge of the bottom to make the bumper look even more different there's a TH-cam video out there that shows you how... The bumper that this person has looks stock..He's just using aftermarket fog lights of some kind
What year mazda 6 is this? I have a 2012, where can I get those head lights and fog lights?
Any difference between the euro version and united states version?
2010, I'm sorry I don't have any idea what spec it was from or the difference between countries.
Just go to dealer And get front plastic bezels for each side of the car and install your own... I think fog lights look ugly on the car
Hi Tolly. How can I open the hood of a 2010 mazda 6 from the outside?
Hi Oghenebrume, I can’t help you with that, sorry, hope you get sorted though!
Unless you're Mr. fantastic from the fantastic four you're going to have to use the cable that's inside the car..Or find a way to cut the clip that holds it down,, Also the cable runs uner the fender you could possibly take off your driver side fender and get to the cable that way
Literally the wrong place to jack up your car in the front like that , never do that
Looks like your curb driver Nice chewed up rims
I never drove this car, bought it as a none runner for parts only.