Automated Machine Tending using a Universal UR5e cobot
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2020
- Sempre Showcase a simple and quick automated machining cell using a collaborative robot. The system took 3 hours to set up and ran 1000 parts automatically, saving 52 hours of operator time.
For more information Call us: +44(0)1452 632712 Email:sales@thesmepregroup.com or Visit www.TheSempreGroup.com
the best thing expert say about reboot can't cheat on you
Had a good laugh with ABBA playing in background. You could make some videos with more disco stuff and cobots doing moves, would be good
I never knew cobots enjoyed ABBA. Do they work harder when they're listening to it?
they work better yes, motivation is one of the key
They should try Rammstein for better performance and productivity
they usually hear machine head
Well time is Money. Money. Money.
@@pick-pock think they would start to go of diesel after hearing rammstein
hows the universal cobots, and support speed.
we have auto doors but use the cobot to hit start on the cnc which also closes the door. it should be capable of sending a close door and start machine signal but its not programmed to.
its quite a waste of time having the cobot do something that should be automatic.
great videos!
Very good
so cute
You should try rage against the machine so we can see its effects.
Amazing, how can i get a copy of this robot program? I am working on a similar project and need to see the .urp file
How about programming it yourself?
As far I know it’s pretty easy to program this robot.
you need ros2 for this robot, as far as i know.
Он так дверцу открывал, я думал он ручку тисков будет крутить😂
Ещё и кнопку пуск нажал потом потом :) не понравилось, что готовую деталь как-то странно бросил, мог бы аккуратно положить где взял.
@@Evgenkr Цель всего этого, автоматизация, но открывать дверь и нажимать кнопку, это как-то очень даже не практично. Вы заходите в лифт, нажимаете кнопку, приходит терминатор и нажимает кнопку нужного этажа, както так)
@@antongyrt4814 тут скорее не смогли интегрировать системы станка и кобота, есть станки с приводами дверей где ни чего этого не надо, в начале обработки дверь закрывается, по окончанию открывается. Тиски тоже на пневме, скорее всего с контроллера кобота заведены, а станок живёт своей жизнью. А вообще коботы очень крутая штука, могут безопасно работать с людьми, для их программирования даже пульт не нужен th-cam.com/users/shortsvKynS6bDilg
Id be worried when a robot can clock up a big Shaft in a lathe in a four jaw chuck until then my job is safe I think 😅
Why not introduced auto dooring with Cycle start ON...?!?!?!
Too much money.
bhai it could be a safety concern also
I saw some company doing this because if you connect the machine to the robot then you need to certificate the machine again, by doing this you don't need any certificate since they are separated. It's also easier if you need to move it to another machine.
Why have they got music on for robots 😃
Cobot który ma udźwig 500g i bardzo często servo mechanizmy umierają. Taka zabawka - nie do przemysłu
Why not 50 at a go
Warum dreht ihr nicht in andere Richtung,ihr macht soviel weg.😅
lol
시발 죤나 웃기네 ㅋㅋㅋㅋ
기계팔이 기계문을 열고 스타트 버튼도 누른다고 ㅋㅋㅋ