A friend of mine just got one of these and he let me run a sack of my 9mm brass through it. I got the cases really clean afterwards and they're a lot easier and smoother on my press
Which stand do you have the Dillon case feeder attached to? Right now I run my Dillon case feeder on top of the press and run a longer tube to the roll sizer, but would prefer to have a separate shorter stand I can set it on so it’s not so high up when running the roll sizer (and decapper some day 😊).
It's always best for feed clean cases into your mechanical sizing equipment, but this decapper only requires the inside to be free of debris. My process is to clean the cases first (dry tumbling), then decap and then rollsize. If you want the spent primer out for wet tumbling, then this is the starting point of that process: remove the spent primer, then wet-tumble and follow on with the rest of your reloading procedure
A friend of mine just got one of these and he let me run a sack of my 9mm brass through it. I got the cases really clean afterwards and they're a lot easier and smoother on my press
Very interesting. How does it perform when the flash holes are different sizes? I've encountered this problem when decapping 9mm by hand.
There are different size decapping pins available, a small .054" for those annoying small flash holes
Excellent tool and great explanation. 🥇🥇
What happens if you have something stuck in the case or for some reason have the double hole primers ?
My goodness what a gamechanger this would be in my process , I run 600-800 rifle rounds a month , whats the cost US
If you are based in the US, check out the supplier's website to order from their US depot.
rollsizer.odoo.com/
Can't just answer the question?? Different prices for different folks??
@@elmerfudd7674 nope, we are based in South Africa so do not ship these to the USA. I just don't know what the US price is
Which stand do you have the Dillon case feeder attached to? Right now I run my Dillon case feeder on top of the press and run a longer tube to the roll sizer, but would prefer to have a separate shorter stand I can set it on so it’s not so high up when running the roll sizer (and decapper some day 😊).
We make a stand (Shooting Stuff brand) for the casefeeder used on the Rollsizer. It's suitable for and of the Rollsizer systems
@@ShootingStuffCC Can you post a link to the product? I can't seem to find it on your website. Thanks!
Do you need to clean first or can it handle dirty brass?
It's always best for feed clean cases into your mechanical sizing equipment, but this decapper only requires the inside to be free of debris. My process is to clean the cases first (dry tumbling), then decap and then rollsize.
If you want the spent primer out for wet tumbling, then this is the starting point of that process: remove the spent primer, then wet-tumble and follow on with the rest of your reloading procedure
Looks interesting. I would use it to size airgun slugs. What is the hp capacity of the motor and the gearbox ratio? thanks
Check those specs on Rollsizer.com website
Can the machine size the case as well?
No, this machine only removes the spent primer
Do I have this right, it’s called a Roll Sizer” but it doesn’t roll size - it only decaps? Pretty stupid nomenclature.
Nope - the company is called Rollsizer.com and they make the original Rollsizer (three models) as well as the automated decapper.
It clearly say ROLLSIZER DECAPPER !!!!!!!!