Ruler, straight edge, black marker and cardboard will gitter dun. Or Cardboard Aided Design CAD for short. Imagine, I made butt loads for twelve years as a computer tech and this is the easy way.
The only suggestion I have is to create a fiberglass wedge plate to put under the master cylinder assembly to tilt the master to make it horizontal. It will do nothing performance wise as it will work fine as is as you have already noted. However if it bugs you in your quest for perfection it is an easy way to get there. You spent many hours perfecting the interior panels to wrap around the corners that most people would ignore but that is what makes your builds stand out from the crowd. Your pedal assembly is better than an off the shelf one in that it is made to precisely fit right where you need it. You would have probably needed to cut it apart and modify it so your approach is a better one.
Hey Bob, now I don't think you have to change your channel name yet but you sure did squeeze all the rat rod out of that there 34 Hot Rod! I hope ole Red was ogling Elvira and missed the last couple of episodes or you might be hearin' from him! Cheers!
Hi it looks good but l think l would have to wear my ballet shoes to drive that rod.looks very narrow in the foot well..l fabricated a number of pedal boxes for clubman sports cars l mounted the pedal boxes on the floor .with a balance bar on the pedal with small 2 masters cylinders .worked well cheers les from Adelaide south Australia
I understand that the brake pedal needed to leave room for the steering column, but by the looks of things, that pedal is hanging right at the door opening. Hit 'er with the blue wrench and get 'er back inside, Bawb. Red knows what needs to be done.
I'll get it down as low as I can but the master cylinder has to bottom out before the pedal hits the floor. Next video I'm installing the brake pedal pad and we'll see where it ends up.
Hey Bob. check out Oliver Anthony's new song. Fits us Folks real well. !! STOP !! Yep Bob's got it. Simple and easy to maintain accessible. What more can you want.
If you could move your microphone further away from your mouth it would eliminate all the heavy breathing and smackey mouth sounds that everyone has complained about for years. I have seen a lot of people over the years mention this stuff but no one has actually come right out and said what is displeasing them. I work with a lot of audio equipment and have for many years. The proximity of the mic has to be very close to your mouth because we can hear every drop of saliva and every breath. Over time these sounds can be nerve racking. Just thought you would want to know. Love you videos, it's going to be great!
always wondered could tou mount the pedal and have master down on frame rail maybe it could rock and push backwards to the master..to hide it..for a clean firewall?which plasma is cheap and best been trying to get one for my boys to help intrest them in man stuff, (and ladies i suppose)..just dont have alot of money and was wondering which cheap one could be a decent investment..doesnt have to be shop quality..i need a sponser like you bawb so i can get me a free one too lol
This one I reviewed recently, works great and it's price is about the lowest for it's quality. www.ssimder.com/collections/plasma-cutter/products/cut50-plasma-cutter
Since this one will have a hood and side panels, I'm not too interested in a super clean firewall like my open engine builds. But you have to admit ... that WILWOOD brake master looks pretty clean.
@RatRodBobBuilds yes sir it looks nice, very well made for sure..been following your builds since Charlotte (probably my favorite)..you do amazing things with those hands..be safe and goodluck ill be watching..cant wait to see the finished product..
Bob , try putting your mic a bit further from your mouth , maybe on the hat brim . The sound of your lips smacking every 10 seconds is unpleasant to listen to . Love your content , not the smacking lip sounds . ......
LOL ... if that's all you guys have to complain about I reckon we're in good shape. I've been hearing that every since I started TH-cam years ago. I never ever smack my lips. That's my boots on the floor.
Lol i thought same thing i could only handel it for about a minute had to go to something else reminds me of someone eating with mout open drives me nuts.
@@fordnut4914 Ha ha haa. It's spelled handle and mouth and capitalize your I, but the rest is good. Didn't mean to drive you nuts. Stay tuned for more boots smacking the floor videos.
I've not been following this build. I hate fiberglass. I enjoy your work , but not on this build. Please hurry and finish this hunk so i can start watching you again, please. This has been a very long,boring build.
I see you're working right on top of your CAD software, you gotta do what you gotta do to get it done Bob!
Ruler, straight edge, black marker and cardboard will gitter dun. Or Cardboard Aided Design CAD for short. Imagine, I made butt loads for twelve years as a computer tech and this is the easy way.
Yep thats what my dad always said we ain't building a piano and we're not flying it to the moon 😅
Damn Bob, When you’re good, you’re good friend..!!! Love your builds❤
Looks like Red is working you to Death ! Time for a day off with pay !, really enjoying this build!!!
Great tips and tutorial on the art of stopping. If you go fast you gotta stop fast. Thanks Bob!
Because of what I've learned from you I think I'll be done with my car here in about a year
It sure is a pleasure to watch you work, Bob. Thanks for the opportunity.
Lets go Bob, show us how its done!!
'We make pretty good use with what we have' For some reason or another that came to my mind...I'm enjoying this build Bob.
Hey Bob, your the man. If i ever needed a piano built, you would be the first one i would call.😊
The only suggestion I have is to create a fiberglass wedge plate to put under the master cylinder assembly to tilt the master to make it horizontal. It will do nothing performance wise as it will work fine as is as you have already noted. However if it bugs you in your quest for perfection it is an easy way to get there. You spent many hours perfecting the interior panels to wrap around the corners that most people would ignore but that is what makes your builds stand out from the crowd. Your pedal assembly is better than an off the shelf one in that it is made to precisely fit right where you need it. You would have probably needed to cut it apart and modify it so your approach is a better one.
Nice work Bob. That's a good looking master cylinder.
Bob is awesome 👍
Hello Bob. Another great video, this car is turning out sweet
Damn that big block Ford looks good between the frame rails😅 keep making cool stuff Bob
Great bit of engineering on the brake pedal, nicely done Bob
Awesome work well done buddy 🛠🛠👍🏼👍🏼
Bob its going to be a custom hot rod one of a kind.
This has been an awesome build love it
You did it again Bob. You took a fairly complicated piece, and simplified it and made it look easy.
It’s going to be Great ….❤
Excellent job, looks like it will work, thanks for sharing, all the best to you and your loved ones
Really great fab work Sir !! Please be careful and God bless you and yours !!! Eddy
Good work. Can't wait to see it finished.
Bob is kicking ass on this 34 !
Looks awesome Bob
Love watching you Bob.Great stuff.Been watching 3 years.Your the best.
We get it, we just aint got it yet. Good job. Hot robot bills I love your show.
Great Bob always like watching your videos! 😊
Super good. I'm always impressed with your knowledge and techniques.
Bob ur work is awesome brother. Love that build....
Nice work on the brake pedal assembly and master mount. Gotta have the woh if you gots the go!! Be safe and stay well.
For how good this will go, it better stop just as well 👍Another great episode Bob !
Good job!
Great job, Bob
Thanks for another , Brother !
Henry Ford himself would be saying " So that is how we could make this work ! " Great stuff Bob and thanks for the work that you do Sir .
The grinder flap discs are surely nice!
Coming along really nice R.R.B. builds
Nice job. Enjoy the weekend.
Awesome Bob job well done. 👍
always great work you do, and making things work
I like it when you fabrakt the part master at work
Nicely done Bob👍👍
Thanks for posting the Plasma cutter , that one you got cuts sweet.
A nice compact assembly you ended up with there Bob..That little coupe will stop on a dime.
Damn nice job on that beauty again.
A great job as always bob.
Everything fits nice and snug, you haven't got alot of room to work with but got-er-done. Brilliant.
There is nothing simple. Great job as always. Another informative video as well.
Nice job bob it looks great !
Man, that's like socks on a rooster! Looks nice!
Another great video, thanks.
Wow that's awesome Bob you can cut straight as an arrow 🏹 😅
Bob thank you for putting a ford in a ford. If I am at a car show and I see a cheaper engine in the car I don’t even look at it.
Another fine detailed video.
Good job. You make it look so easy at times. Up here in the North East with snow coming it's time to work on our HOT RODS for the spring.
Good Job Bawb
With that torch 🔦
Great job Bawwb😊
We getting it ... just ain't got it yet!
Yeah you are the madman of roadsters
Very good work Bob coming along nicely Happy Thanksgiving 🦃
Hey Bob, now I don't think you have to change your channel name yet but you sure did squeeze all the rat rod out of that there 34 Hot Rod! I hope ole Red was ogling Elvira and missed the last couple of episodes or you might be hearin' from him! Cheers!
Yeah you shore make the ratiest rod's that gets everyone's attention 😂❤
Looking good
Looking good Bob 👍👍
We don't see Red too often anymore, but we know who's doin' the math behind the scenes..
Looks easy when you do it.
BTW, nice work
Wow!
Hi it looks good but l think l would have to wear my ballet
shoes to drive that rod.looks very narrow in the foot well..l fabricated a number of pedal boxes for clubman sports cars l mounted the pedal boxes on the floor .with a balance bar on the pedal with small 2 masters cylinders .worked well cheers les from Adelaide south Australia
Sweet
bob weld that pedal in line get reed of those bolts i agree you are good now weld that pedal in line only if you want ha! ha!
Bobby go ahead and chew that tabaccy and have the spit can close . LoL its looking good their Bud .
I understand that the brake pedal needed to leave room for the steering column, but by the looks of things, that pedal is hanging right at the door opening. Hit 'er with the blue wrench and get 'er back inside, Bawb. Red knows what needs to be done.
I'll get it down as low as I can but the master cylinder has to bottom out before the pedal hits the floor. Next video I'm installing the brake pedal pad and we'll see where it ends up.
Dam man i getting older than you everything I see wow
Hey Bob. check out Oliver Anthony's new song. Fits us Folks real well.
!! STOP !! Yep Bob's got it. Simple and easy to maintain accessible. What more can you want.
Timex not a Rolex that’s what I always say 😆
Bob your lips smacking is good!😂😂😂 could you stop breathing for 90 minutes? 😂😂😂😂
Taking the weekend off yeah ub out there tomorrow get I’m done gonna be great
No return spring , just in case?
If you could move your microphone further away from your mouth it would eliminate all the heavy breathing and smackey mouth sounds that everyone has complained about for years. I have seen a lot of people over the years mention this stuff but no one has actually come right out and said what is displeasing them. I work with a lot of audio equipment and have for many years. The proximity of the mic has to be very close to your mouth because we can hear every drop of saliva and every breath. Over time these sounds can be nerve racking. Just thought you would want to know. Love you videos, it's going to be great!
If you could, do me a favor and give me a timestamp or two of where you're hearing this.
This is a hotrod. There is no rat rod about it at all. 😮😅
Hey Bawb, looks like I got on first, did I win?
always wondered could tou mount the pedal and have master down on frame rail maybe it could rock and push backwards to the master..to hide it..for a clean firewall?which plasma is cheap and best been trying to get one for my boys to help intrest them in man stuff, (and ladies i suppose)..just dont have alot of money and was wondering which cheap one could be a decent investment..doesnt have to be shop quality..i need a sponser like you bawb so i can get me a free one too lol
This one I reviewed recently, works great and it's price is about the lowest for it's quality.
www.ssimder.com/collections/plasma-cutter/products/cut50-plasma-cutter
Since this one will have a hood and side panels, I'm not too interested in a super clean firewall like my open engine builds. But you have to admit ... that WILWOOD brake master looks pretty clean.
@RatRodBobBuilds yes sir it looks nice, very well made for sure..been following your builds since Charlotte (probably my favorite)..you do amazing things with those hands..be safe and goodluck ill be watching..cant wait to see the finished product..
k
Why not save $250.00 and you know you can make it as good or probably better why not?
Bob , try putting your mic a bit further from your mouth , maybe on the hat brim . The sound of your lips smacking every 10 seconds is unpleasant to listen to . Love your content , not the smacking lip sounds . ......
I think Bob is sucking on a hard candy in a lot of videos, at least that's what it sounds like
LOL ... if that's all you guys have to complain about I reckon we're in good shape. I've been hearing that every since I started TH-cam years ago. I never ever smack my lips. That's my boots on the floor.
Lol i thought same thing i could only handel it for about a minute had to go to something else reminds me of someone eating with mout open drives me nuts.
@@fordnut4914 Ha ha haa. It's spelled handle and mouth and capitalize your I, but the rest is good. Didn't mean to drive you nuts. Stay tuned for more boots smacking the floor videos.
@@RatRodBobBuilds lol
I've not been following this build. I hate fiberglass. I enjoy your work , but not on this build. Please hurry and finish this hunk so i can start watching you again, please. This has been a very long,boring build.
Nice job Bob
BoB I only have one thing to say to you mate , Your the MASTER of turning 💩 INTO GOLD . Love your work Mate . 🤣🥰🤠
Nice work Bob 👍