How to Build a Rhino Racing Shark RC Drift Car
ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2025
- Today I show you everything you need to build a Rhino Racing Shark. Mine originally started as a Yokomo YD2Z Ready to Run on the RD1.0 Platform. I have heard there may be some differences on the RD2.0 kit that is new. I hope this video can help anyone looking at different RC Drift Chassis to get.
Drop your questions below!
Feel free to look back at my first update video for information about the full shocks setup... • Yokomo YD-2Z RTR Overv...
Thanks for watching!
RC Tools I Use or Recommend:
3m Mounting Tape: amzn.to/3DoFrG... Metric Wrenches: amzn.to/3NY59Xt
JConcepts Camber Tool: amzn.to/3DhLxbW
Thinktank Cable Bag: amzn.to/3rqEwmd
Mip Tips for Drill!: amzn.to/3pPjsp8
Compact Drill for Bits: amzn.to/3Og3v4F
Mip Wheel Nut Drivers: amzn.to/44E2hWq
Body Scissors: amzn.to/3Di1aQI
Flush Cutters: amzn.to/3K2SL7f
Servo WIre Crimp Tool: amzn.to/46OGIEq
Solder Station: amzn.to/3DcPNtf
Current Charger: amzn.to/3PZurqT (Needs Power Supply)
My Camera Gear:
Sony Zv-E10 Camera: amzn.to/44ni8J0
WIreless Mics : amzn.to/47lSGWj
360 Camera: amzn.to/3OpfWvn
Extended Camera Battery: amzn.to/3rvj8fJ
Lens: amzn.to/3NRfHaB
Video Monitor: amzn.to/3D9oiAP
Cable for Monitor: amzn.to/3XLzr4d
SD Cards I use: amzn.to/3POHpaM
Editing Gear:
Microphone: amzn.to/46OyZWV
Mic Arm: amzn.to/46LdaaV
Mouse: amzn.to/3NT0vKc
Ketboard: amzn.to/3Ohh7gf
Mac Stand: amzn.to/3PZhtJp
Card Reader: amzn.to/44Dy8GK
Any gear purchased through these links helps support this channel!
Great video!! Can’t wait to see the new build
Thank you! Cant wait to have a driving buddy!
Which spacer you use for the upper front arms with the ddss?? stock is to small
Im running the shark front arms now but I do remember I had to stack spacers on the shocks to push them farther forward away from the arms to clear them.
Is it cheaper to get a doner or buy the parts needed sepsrately?
The donor seemed the easiest to build at the time, I was able to go step by step and do one upgrade at a time rather than be forced to build the entire shark all at once. It also was hard at the time to source certain parts so I would have had to spend $60 for a $9 dollar part and I wasn’t down for that haha. My shark still isn’t full complete either, I’m still running the stock plastic arms and hubs on the rear off my car that came with the doner car I used. Unless your buying a full built shark that’s ready to go, your probably going to want a doner car so you can at least be able to drive it during the upgrade process.👍🏼
hi there! say... about the gearbox... what's the configuration of it? does it takes 1 or 2 idle gears?!
You can choose 1 or 2 idler gears. Running one give you a 3 gear setup, running two make it a 4. I run 1 idler in my own car
A link to buy the 350 kit?
I purchased mine from super g rc drift arenas website. supergdrift.com/store/product/shark-yd-2-conversion-kit-red-purple-black-rhino-racing-yd2-ddss/
@@SeanLewisMedia you rock man! Thanks 🙏🏽
@@Danny.fb6 No problem!!!
Another amazing vid ! Which MM one you double stack for the shocks ?
I double stack two 10mm’s to make a 20mm for the shocks. Thank you for the kind words🙏🏼