I had Error P03 which online Canon shows is error code 6000 which is paper jam? I couldn't see any paper. I kept trying and trying to follow instructions. Finally I decided I want to take this damn machine apart. And this video showed me exactly how to do it. And guess what? I found a small 2x 2 clear plastic stuck in the white rolling wheels. Where it came from I do not have any clue. It looked like part of the packaging. But it was stuck and I pulled it right out.
Viandant5: You sir, are a GENIUS. 😁 Thank you for posting this video. With concise and comprehensive instructions that even I ( a guy) can comprehend, and follow. 😁 My TS3100 was making so much internal rattling and noise; I was on the verge of pulling ALL my hair out, in frustration. You not only helped me fix/save my printer... you saved my SANITY! 🤣 Thank you. Thank you. And, THANK YOU! 😁👍👍👍
There are two to flat strips under the control button panel. Minute 1:45 and 2:09. Do they plug into anything on the motherboard area? Minute 2:20. Trying to reassemble and want to do it correctly. Didn't take much apart since I found the issue of a paper feed. Please advise
Hi, thank you so much for your video!!! I found a brand new but abandoned Canon TS3150 next to the garbage containers and I'm willing to fix it! It makes rare noises when I turn it on and gives a blank paper. When trying to print, P08 error is displayed along with a 5200 code and the orange light is on. I disassembled the printer and everything seems to be ok inside. No ink, no paper jams.. I read this error is related to the ink pad, it may need to be changed or cleaned, but I also read it can be due to the cartridge not refreshing a resistance with too high temperature... I already cleaned the cartridges and they look ok and still contain ink but I don't know how old is the printer and how used it was before I got it... Do you think it can be solved simply by changing the cartridges or should I disassembly again and remove the waste ink pads? Lol I'm getting insane!! Should I just throw it away again? hahah If you read until here THANK YOU so much for your attention and help in advance! Greeting from Spain!! :))
@@viandant5 Thanks a lot for your help! I will try to replace them with new ones. If this is not working, I hope I manage to clean the conectors! I will come back with news just in case anyone here is looking for the same help. Xx.
@@viandant5 Here again! My printer is finally working! In fact it was due to bad cartridges, I bought new original ones and perfectly working since the begining. Thanks again for your recommendation, I was not sure whether it was worth to invest on ink for this (maybe old) printer
@@viandant5 does it may be the cause of lines on the printing, cause usually it happends for example when printing a doc, in font size 12, every 7 lines, the line gets a line in the middle but dividing it.
My Canon ts 3151 printer has a 1-0-P error. I would like to know if I should throw it away or if you who are a great expert can give me some suggestions. Thank you, Mr Viandant 5
Thank you very much for your courtesy and professionalism...I will try to do what you suggested and I hope to solve the problem...I get a doubt because the cart of the cartridges does not move if not manually. Happy New Year
I really hope you reply to my comment I opened my printer to clean the transparent strip while following your turorial After cleaning it, everytime i turn on the printer the cartridges move left then right really fast then the pribter gives me error p22 Please help
@@axstra2557 are you sure the cartridges are correctly installed? try to remove and reinstall them. tey to move the ink carriage by hand back and forth
@@viandant5 thanks bro I realized that I didn't put the encoder strip correctly. Behind the cartridges there is a sensor and I had to put it there but I forgot I fixed it now Thanks
Around 6 minutes, what's the transparent plastic strip called / or for pls with L and R marked each side , and hooked, through the printer cartridges part?
I unpacked the printer to the end, I didn't leave any nail or any slice. I got excited because of the paper jammming and I didn't find anything, but I got a slice. The last small green printer got it and got under it a small piece of cork, but how did it come to this place to the end of the printer. There was nothing indicates entering the place and now I can't return it. Is there a video of how to install the printer the same printer and the number
hi i have a problem, my bizhub 162 displays error code C0500 and when i check the fuser unit, it does not get hot at all, i tested the thermostat & the thermister and i found out they are ok, so i suspected the lamp but it seems fine by looking at it and i tested its continuity and it also seems fine, what can be the problem, plz i need help🙏
Nello smontare la mia TS3151 mi si sono scollegati i 2 connettori flat del tastierino dalla scheda madre. Uno piccolo (che va al tastierino) e uno grande (che va allo scanner) Hanno un lato "azzurro" e uno con la connessione "a vista" Qual'è il giusto orientamento dei cavi? Se nel caso inverto il senso succede qualcosa? grazie mille
hello, I took apart my ts printer apart because a plastic strummer was caught inside and now i can't really figure out how to reassemble it properly do you have away to show us how*? love it thanks
لقد فكتت الطابعه لنهايه لم اترك اي مسمار او اي شريحه لقد انفعلت بسبب انحشار الورق ولم اجد اي شي ولاكن حصلت شريحه اخر الطابعه خضراء صغيره وفكيتها وحصلت تحتها قطعه صغيره من الفلين ولاكن كيف اتت الي هاذا المكان الي اخر الطابعه لم يكن موجود اي شي يدل ع الدخول للمكان والان انا لاستطيع ان ارجعها هل يوجد فديو لطريقه تركيب الطابعه نفس الطابعه والرقم
I did all this because a pen got stuck inside my printer but now I am so confused because there is an extra connector in the cover of the printer (it looks kinda thicker than the other one shown in the video) and I tried putting it there where it is most logically should be, but the printer shows error :( It's kinda frustrating because I feel like I just made a small error and my printer is actually working. If anyone knows how to fix this I'd love to know. I only did all the steps until the cover got removed, that is all. Thank you so much for the video nevertheless, I would never have found the pen if I hadnt opened it!
Hi... wondering if you can help sir...i have pixma 3451 ...it fell down recently... fortunately nothing broke..printer works as well but two issues. 1. The plastic part has come out but i cant figure out where exactly it will fit 2. I think because of that part whats happening is page is not getting inside the printer via those two wheels .. basically that wheel assembly is not getting picked correctly..and i have to push page down a little If you can help please.. i can email you the picture of a part which fell down
I had Error P03 which online Canon shows is error code 6000 which is paper jam? I couldn't see any paper. I kept trying and trying to follow instructions. Finally I decided I want to take this damn machine apart. And this video showed me exactly how to do it. And guess what? I found a small 2x 2 clear plastic stuck in the white rolling wheels. Where it came from I do not have any clue. It looked like part of the packaging. But it was stuck and I pulled it right out.
Viandant5: You sir, are a GENIUS. 😁 Thank you for posting this video. With concise and comprehensive instructions that even I ( a guy) can comprehend, and follow. 😁 My TS3100 was making so much internal rattling and noise; I was on the verge of pulling ALL my hair out, in frustration. You not only helped me fix/save my printer... you saved my SANITY! 🤣 Thank you. Thank you. And, THANK YOU! 😁👍👍👍
Is there a picture of the spring so I can finish putting it together
Sorry I have no more that machine in office
There are two to flat strips under the control button panel. Minute 1:45 and 2:09. Do they plug into anything on the motherboard area? Minute 2:20. Trying to reassemble and want to do it correctly. Didn't take much apart since I found the issue of a paper feed. Please advise
yes they are plugged in the mother board
Gracias, se me soltó la cinta guía de los cabezales y me ha venido genial el video.
Thanks for the video
It helped me👍
Hi, thank you so much for your video!!!
I found a brand new but abandoned Canon TS3150 next to the garbage containers and I'm willing to fix it!
It makes rare noises when I turn it on and gives a blank paper. When trying to print, P08 error is displayed along with a 5200 code and the orange light is on. I disassembled the printer and everything seems to be ok inside. No ink, no paper jams.. I read this error is related to the ink pad, it may need to be changed or cleaned, but I also read it can be due to the cartridge not refreshing a resistance with too high temperature... I already cleaned the cartridges and they look ok and still contain ink but I don't know how old is the printer and how used it was before I got it...
Do you think it can be solved simply by changing the cartridges or should I disassembly again and remove the waste ink pads? Lol I'm getting insane!! Should I just throw it away again? hahah
If you read until here THANK YOU so much for your attention and help in advance! Greeting from Spain!! :))
The problem is related to the ink cartridge. I think if you change it the problem should disappear, if the contacts are not defective or dirty.
@@viandant5 Thanks a lot for your help! I will try to replace them with new ones. If this is not working, I hope I manage to clean the conectors! I will come back with news just in case anyone here is looking for the same help. Xx.
@@viandant5 Here again! My printer is finally working! In fact it was due to bad cartridges, I bought new original ones and perfectly working since the begining. Thanks again for your recommendation, I was not sure whether it was worth to invest on ink for this (maybe old) printer
I found a spring I took out but cannot remember where it went
What do I do to replace it so I can put back together
Sorry I can't help you, there are several springs
Hi, do you have an instruction for resetting Canon toner level after refilling the cartridge?
which toner?
@@viandant5 Canon 067 toner cartridge. My printer is MF654Cdw.
@@johntucker5521 there is a chip, there are not reset instructions
what happened if the encoder strip is dirty, is there a way to clean it or any specific product to clean it or it has to be replaced?
clean it with alcohol
@@viandant5 does it may be the cause of lines on the printing, cause usually it happends for example when printing a doc, in font size 12, every 7 lines, the line gets a line in the middle but dividing it.
Yes it could make the print-head moving not correctly
@@viandant5 tkanks so much I will try it and will coment back. but the video its very useful.
My Canon ts 3151 printer has a 1-0-P error. I would like to know if I should throw it away or if you who are a great expert can give me some suggestions. Thank you, Mr Viandant 5
Here there is a video on that error th-cam.com/video/ufLDJcj7ExI/w-d-xo.html
Thank you very much for your courtesy and professionalism...I will try to do what you suggested and I hope to solve the problem...I get a doubt because the cart of the cartridges does not move if not manually. Happy New Year
I really hope you reply to my comment
I opened my printer to clean the transparent strip while following your turorial
After cleaning it, everytime i turn on the printer the cartridges move left then right really fast then the pribter gives me error p22
Please help
Please reply 😢
@@axstra2557 are you sure the cartridges are correctly installed? try to remove and reinstall them. tey to move the ink carriage by hand back and forth
@@viandant5 thanks bro I realized that I didn't put the encoder strip correctly.
Behind the cartridges there is a sensor and I had to put it there but I forgot
I fixed it now
Thanks
Around 6 minutes, what's the transparent plastic strip called / or for pls with L and R marked each side , and hooked, through the printer cartridges part?
May be the encoder strip
Yes ✅️🫡
I unpacked the printer to the end, I didn't leave any nail or any slice. I got excited because of the paper jammming and I didn't find anything, but I got a slice. The last small green printer got it and got under it a small piece of cork, but how did it come to this place to the end of the printer. There was nothing indicates entering the place and now I can't return it. Is there a video of how to install the printer the same printer and the number
I only have this video, I don't understand what is a slice
Hello. Canon inkjet printer TS3150 shows P 1 0. Is it possible to advise me what to do? Thank you in advance. Friday D.
I made a video
th-cam.com/video/ufLDJcj7ExI/w-d-xo.html
Any ideas how to take the absorbers out of a TS5151? Thanks 👍
Sorry I have no manuals of that machine
No worries, thanks anyway 👍
hi i have a problem, my bizhub 162 displays error code C0500 and when i check the fuser unit, it does not get hot at all, i tested the thermostat & the thermister and i found out they are ok, so i suspected the lamp but it seems fine by looking at it and i tested its continuity and it also seems fine, what can be the problem, plz i need help🙏
It's a general fuser error, proably the lamp. Testing the continuity of the lamp could not ensure that everything is ok
@@viandant5 so you mean just bcz its continuity is ok and it looks ok doesnt mean it fina, thanks alot may GOD bless your work
Nello smontare la mia TS3151 mi si sono scollegati i 2 connettori flat del tastierino dalla scheda madre.
Uno piccolo (che va al tastierino) e uno grande (che va allo scanner)
Hanno un lato "azzurro" e uno con la connessione "a vista"
Qual'è il giusto orientamento dei cavi?
Se nel caso inverto il senso succede qualcosa?
grazie mille
la connessione a vista va inserita in modo che tocchi i contatti elettronici dentro al connettore
Many thinks!!! All best for you!
I have a question. If that wide wire thing, which is connected in the control buttons (upper), is damaged. What should I do? Can it be replaced?
The flat cable? it's really complicated to repair it, I think you have to change it
@@viandant5 okayy, I actually figured it out recently. But, thank you for your response.
Where to buy encoder strip and disk for my printer? Please help.
Which printer? Try Alibaba, Aliexpress, or search with Google avoiding ebay
hello, I took apart my ts printer apart because a plastic strummer was caught inside and now i can't really figure out how to reassemble it properly do you have away to show us how*? love it thanks
Following these instructions you should be able to reassemble the printer. Which part have you difficulties to reassemble?
"Canon really made a mess with this cable" ... not only with this cable and not only Canon. Modern printers are a nightmare.
لقد فكتت الطابعه لنهايه لم اترك اي مسمار او اي شريحه لقد انفعلت بسبب انحشار الورق ولم اجد اي شي ولاكن حصلت شريحه اخر الطابعه خضراء صغيره وفكيتها وحصلت تحتها قطعه صغيره من الفلين ولاكن كيف اتت الي هاذا المكان الي اخر الطابعه لم يكن موجود اي شي يدل ع الدخول للمكان والان انا لاستطيع ان ارجعها هل يوجد فديو لطريقه تركيب الطابعه نفس الطابعه والرقم
La mia stampante Canon 3151 TS ha mangiato la carta, ma non si riesce a vedere.Sembra quasi sia andata sotto i rulli,cosa devo fare ? Grazie
Sicuro che il foglio non sia rimasto nel cassetto? Dà un messaggio di errore?
How can I reset the error code p07 on TS3440??
th-cam.com/video/391ge9qZrj0/w-d-xo.html
Gracias por tu video graciaaaaaaaaaas
I did all this because a pen got stuck inside my printer but now I am so confused because there is an extra connector in the cover of the printer (it looks kinda thicker than the other one shown in the video) and I tried putting it there where it is most logically should be, but the printer shows error :( It's kinda frustrating because I feel like I just made a small error and my printer is actually working. If anyone knows how to fix this I'd love to know. I only did all the steps until the cover got removed, that is all. Thank you so much for the video nevertheless, I would never have found the pen if I hadnt opened it!
There is another large flat cable, it's the flat cable of the scanner
merci !
Sir my TS3340 has an errorP02
It's related to the ink cartridge
just look up online what those symbols mean, theres lots of them but google will directly tell you.
👍👍👍
Hi... wondering if you can help sir...i have pixma 3451 ...it fell down recently... fortunately nothing broke..printer works as well but two issues.
1. The plastic part has come out but i cant figure out where exactly it will fit
2. I think because of that part whats happening is page is not getting inside the printer via those two wheels .. basically that wheel assembly is not getting picked correctly..and i have to push page down a little
If you can help please.. i can email you the picture of a part which fell down
I think that part is the sensor lever of the paper, it senses the presence of the sheet. It should be near the paper rollers