How to replace freightliner cascadia pinion yoke seals, Front, & Rear, kenworth volvo ect
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2020
- How to remove and replace differential pinion yoke seal on semi truck
Milwaukee M18 FUEL 1" High Torque Impact Wrench w/ ONE-KEY Kit
amzn.to/2Kn7WJq - ยานยนต์และพาหนะ
what silicon did you use?
amzn.to/3NmhUwr
So glad i found your channel. I'm a new diesel mechanic and I get thrown crazy jobs like this with no knowledge on what to do. Your videos save my ass quite a bit.
Always have a new crispy SnapOn 12 point socket on hand , not a Garbage Freight socket . In the event the 12 point bolt head strips , with a 3 pound hit the bolt head hard deforming the bolt head . Then pound the socket on the bolt head. I use Number 2 Permatex non hardening sealant on the outer metal surface of the seal . Pack the inside of the seal with grease , holds seal spring in place . Great Video ! 121/23
your videos are great...straight the the point....and very helpful, thanks so much for taking the time to do these great vids!!
Really appreciate it 🙏thanks for watching sir
I like the way you guys work, nice and cleand. Thas call perfection..
Excellent... excellent presentation. Your videos are awesome. Thank you.
This is the best video very professional and the right toolset, thanks for this great information
I personally don’t recommend using sandpaper for the seal mating surfaces. When you remove material with sandpaper your relieving the mating surfaces friction fit design. It’s supposed to be a pressed fit to do its job, which is to stop leaks/prevent leaks
I did it myself last night and successfully replaced it. thank you very much
im glat it helps you, thanks for watching 👍👍👍
Just did mine last week, pinion nuts were crazy tight
Keep it coming with the videos. Good job. Thank you..
thank you sir!!👍👍
Good Job you're a teacher
Very nicely made video and nicely explained
Verry good. Brou, hi from COSTA RICA..
when have locktie, use fire to heat the threads enclosing part will help release that 12 point bolts. very often people damage either socket or bolt head.
Muy Buen tutorial gracias y saludos 👋😃
Magnificent work 👏 👌
Thank you sir 🙏,
Nice 👍🏽 video man!! Keep It up!!
Thank you sir 🙏
Good work bro... I Learn something and I need that same thing done on my truck
Thank you
Buen video. Todos esos trailers son standard o tambien metricos? No se que set de sockets comprar
Great video
Great job
thank you sir!!
Do you suggest replacing that stabalizer bar if the bushings are a little dry rotted
From someone who does this for a living those yokes don’t come out that easy all the time even with a yoke puller.....lol
I once used a 1 inch impact with a yoke puller AND heat and got the ok to just torch it off, which I hate doing. Some people just don't put nevr seize.
𝑰𝒎.𝒂𝒈𝒓𝒆𝒆
@@nessperez9428 p
question on a freightliner front axle inner axle shaft bushing an seal what tools do you use??? Please Please an where s my tool box tour thanks...
I agree good video but those yokes can be a bear to take off never had one that easy
made in u.s.a. là số 1 anh ơi
thank you sir!!
Good video but God help the next guy that has to take that apart . I think they use blue thread locker not red at factory.
Perfect!
thanks
No se te olvide revisar las niveles de aceité.
I have oil leak from the same place on my Cascadia, but i realized the bearing has a free play.
Can i adjust the free play somewhere behind the seal, is it adjustable???
You can can put a sleeve on the yoke if it have a lot of ware righ?
Bro I have a question I changed a axel differenttial yoke and everything when I started my truck it had a warning sign saying check trans... And only goes up to second gear could it be my transmission
Thank you knowledge
Awesome.... can you do a video on how to reseal power divider case.?
a question what given measure is the tool to remove the nut
Never saw a yoke come off that easy.
That's what I said lol .only on you tube you'll find someone get the easy one
Thank you very much
thanks for watching
Thank you 🙏
Hope you kept the shafts in phase
Oiga compa una preguntita cuando lo pide que es lo que tiene que oreguntar uno como se llama exactamente el primer sello que cambio
im doing this right now because some guy drove a hundred miles with a loaded trailer on and the air bags down chewed up the seal got the bearings hot, no flakes or chunks in the fluid though i guess thats the silver lining here i dont know.
Thanks sir good information plz send me more information tools thanks again
ill try to post more in the description, thank you
What size is nut on output shaft yoke?
You are good mekanek
Thank you sir!!
Make sure you Aline driveline because it will vibrate
a like the explain thanks , is there a special tool to do these ? like an installer kit ? alguien save si hay un kit de instalasion ? me pueden pasar la liga ?
Lon unico que no explica es como debe estar alineado el drive shaft. O como dicen in phase. Muy buen video
Yo creo qué mientras el camión está en una superficie plana todo encaja perfectamente, y no tiene qué forzarlo, pero todo está bien entendible y adelante amigo,
great video can you plz mention the corless impact gun used . i want to buy as well.thx
hello, i just put a link in the description, its the Milwaukee 2867 1 inch drive
What’s the part no for the puller
Can you one more video of differential main seal how can put main seal please
Don't know the torque specs so were just gonna send it...nice
What?
What air compressor you using
Good job bro 👏 where is your shop located???? I'm 2 times changing Seal still leaks I don't know what happened who's give me answers????
Do you have video of steering wheel bearings replacement?
i will make one soon
great video
Thanks for watching sir 🙏
Very good job, no waisted time, but I prefer a rubber hammer, why you don’t use the jaw puller kit? Is it not good for this job? I’m asking.
Thank you very much. From now I’ll follow you and subscribe to your channel.
i use wheel bearing racer to install seal
Hey if you drove with the brake’s applied a little due to an air leak could that cause a seal to leak on the differential?
On the wheel seals?
So the socket needed for the yolk bolts are 1/2 12 point ?
Yes. Most trucks use that style . There could be different ones out there though
I'm dealing with the same issue.
hopefully this video helps you!!!
I have never seen someone reuse the old dust cover and seal mate in my life...
Es lo mismo en la de enfrente donde entra a la transmission?
Gracias de antemano.
Si
You have a shop out here in California?
Hey 👋 Sr can give the information for the drill used on the video for the take off the big nuts on the joke thanks
Milwaukee M18 FUEL 1" High Torque Impact Wrench with ONE-KEY, Bare Tool Only, No Charger, No Battery a.co/d/6gQOqkp
Hey man thanks for all you videos learning a lot from you so what kind off impact gun do you for that
You can do what he did in another video and put a air hookup on the truck for a big impact gun. Let the truck idle for air and you can do anything. Inflate tires, remove big bolts, grind surfaces, etc. etc.
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?
Its probably just the airline fror the differential switch, put the differential switch on, go outside next to the differential and see if you can hear the air leak
@@TRUCKINGTIPSDIY Thank you will try. I hope it's not internal failure
@@TRUCKINGTIPSDIY I want open divider to see what is wrong. Do you know what size yoke nut socket is it usually? Also do I need replace gasket around plate?
no link on the socket :(
is there supposted to be freeplay in the drive shaft?? mines has about a 1/4 turn when the trucl is off
Yes little freeplay is normal
@@TRUCKINGTIPSDIY is there an email i can send you a video to tell me what you think??
@@TRUCKINGTIPSDIY to give you an idea if your looking at a clock mines goes from 12 to 2
Where did u get the socket? I can't find one
At the dealer
Nice job man were you using half inch m18 Milwaukee??
thanks you, its the 1" m18, thanks for watching
They have change that seal three times now and still leaking a lot . any suggestions?? would love to go to your shop and get it done
Hello, you can check the hight of the airbags make sure there not to low, also check the U joint, if its worned out it needs to be replaced, also check yoke if it has a lot of Playland that is not worked out where the seal seats,sorry I don't have a a shop, thank you for watching!
check your vent hose for being plugged
Its true that check your yoke play ,it might the bearing worn which needs to be replaced.
where is your shop located ?
Good video vatos .....at how many miles do you have to do this seals?
gracias, until the seals leak , this truck has around 700K
thanks for watching my videos !!
Hey a question. Do you think i can take the pinion nut off with a breaker bar. I font have an impact.
Great video i need to do this right now aswell. The dealer wants 1800 to change pinion seal and 2 wheel seals. Im gonna buy all the tools i need and do it myself. I love it. Keep the videos coming.
hello, i dont think a breaker bar will be enough to remove the pinon nut, hopefully you can get the job done, thanks for watching!! let me know once you fix it!!
@@TRUCKINGTIPSDIY we bent a 40in breaker bar.
So i got a 3/4 milwaukee impact. Those things are a beast👍
@@Tommytv2 so did u get it loose with a 1" braker bar? And then used a 3/4 impact?
@@orlanmedina3693 no the breaker bar bent and was useless. I bought the 3/4 milwaukee impact and about 1 min of holding it down the nut cracked loose. Definately worth the money. 800$ canadian including 2 batteries
@@Tommytv2 holly... I thought with a 1" breaker bar and a big pipe was gonna be able to get it loose
What are you spraying that gasoline with?
that's what i want to know too
Ditto
Donde puedo comprar ese tipo de martillo?
Slide hammer,, ebay amazon
What is the flat rate for this job?
Im not sure
Muy sofisticado ya ratos t hubiera sacado ese sello soy mecánico de los rudos
18:50 asi o mas rudo?
Cuanto cobras por cambiar la air compresor del cascadia
@@TRUCKINGTIPSDIY question on a freightliner front axle inner axle shaft bushing an seal what tools do you use??? Please Please an where s my tool box tour thanks...
@@TRUCKINGTIPSDIY òĺòl
you all probably dont give a shit but does someone know a trick to log back into an Instagram account..?
I was stupid forgot the account password. I would love any tips you can give me.
Action pack video
Funny good.problems supple..
ВСЕ одинаковые водители, русский, нерусский все мажут герметик, смазку ПАЛЬЦЕМ....... ПИТЕР СПАСИБО ................
What year is your truck
2013
How much do you charge for this job?
Im not sure how much they charge, we just work on our trucks
What year is your truck my guy
2013
@@TRUCKINGTIPSDIY I replace my seals in it still leaking look like the leak coming from around the lock ring what u thk
Вроде сальник был нормальный. Сапун надо проверить было.
Thanks for watching sir 🙏
Дякую за відповідь пан🙏
You must wear gloves when touching solvents such as gasoline
El que le esta usando no sabe
Como?
TH-cam University.
sorry cordless impact gun
Mr DIY, this was done very incorrect by making sure no fingers were smashed U sir need seriously training. 🤣❤️🇺🇸👍
shouldve drilled