A very inportant video, filled with information, thanks CLO! This video was also incredibly dull. Even though CLO is interesting and fun, I could hardly keep awake through the drawling. CLO, if you ever remake this video, please do it a bit differently.
Glad you found the information important. We do actually have an updated version of our beginner course currently available on Udemy www.udemy.com/user/clo3d-virtual-fashion/
Excellent! Finally a clear explanation of the tools. I am so excited to get started. I've had this program for over a year and I just learned more in an hour than in all that time!
how to hold down left click and simultaneously right click on a track pad? (used to transform pattern and edit moving distance in between 4:00 to 12:00)
You would have to adjust the settings in CLO as well as in the computer settings as well. Honestly, an inexpensive mouse will make your CLO experience a LOT easier.
Thank you very much for these videos. One problem I am facing is that I am using Mac and I cannot do the instructions at minute 5:25: Left Click DRag and at the same time Right Click! this is impossible in Mac. can you guide me?
Hi Anoosheh. in CLO to open precision you will need to hold the Option Key and Left click (magic mouse). We have further information about this on our website support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
@@CLO3D thank you for your response. But this is not working. In the video you mentioned, "as you are left clicking for resizing a shape, right-click simultaneously to get a transform box." But right click is impossible and the holding option also does not work. thank you for your help.
@@Anooshehk The Hold left click and Simultaneously click Right is only for a Regular 3 button Mouse. What type of mouse are you using? Have you set up the proper type in your settings? In your Settings > User Settings > View Controls make sure that you are on the correct type of mouse - Drop down menu in the upper right corner. We have a guide about this in our beginner series th-cam.com/video/0Oc-mtpQEk0/w-d-xo.html Once you have the proper settings for your mouse you should then be able to follow the link to the mac guide I posted above. I will mention again if you are using a magic mouse it is slightly different opening a Precision Box then what the instructor is saying since they are using a 3button mouse. You must use Mac commands instead
@@CLO3D I am using Mac Book pro and using the square frame on my laptop the bottom of my keyboard and using my fingers for navigation. I do not have a separate mouse
Very helpful thank you, one note I'm unable to access the menus needed when you should right and left click together with a magic mouse, is there a work around?
Hi. You can find more specific information on our websites help center. here is an article about Mac Navigation support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
Hi! It’s 3 years later and the ‘curvature tool’ is now ‘fullness (point)’. I will look for another tutorial for the updated software tool, but if you could direct me to a tutorial or have any tips, I’m here! Thanks
Hi. There are both the Curvature tool and the Fullness tool in CLO. You may just have your tools set up to be hidden under other tools currently by grouping. Grouping tools can be turned off in the User Settings. You can also find a newer CLO tutorial on Udemy. www.udemy.com/course/clo3d-basic-apparel-training-core-module/
@@CLO3D months and months late, and my user experience was so BAD it wasn't worth torturing myself, and i couldn't there for even recommend your program to other people
What is the word which is mentioned at Time - 37:57 - 37:58? It goes like "This is totally fine" at 37:55, "The baseline is really kind of ........." at 37:57-37:58. I don't understand that word. Kindly type it in Reply for me to pick up the word and understand what is meant there.
I couldn't move the picking point in the 3d window as shown in 24:40. Did I miss anything from the previous basics or is it because of the version 6.2 I am using?
The picking point shows up when you select the pattern piece in the 3D window. In the video, she grabs the pattern and stops simulation. When she selects a new tool, the picking point disappears.
If you use the Edit Curvature Tool to change the segment, when you then go back to the Edit Pattern Tool, you will have the Bezier Handles on that segment.
It was just an editing clip - good eye! Both were made the same exact way but you don't get an issue with very small offsets. So it was better to show how to handle version where a different result occurs that might need explaining.
IF you have not arranged and sewn the patterns around the avatar you can add pins so they do not fall and you can still affect them while simulating. You can Freeze or Deactivate the patterns not being edited and they will stay in place.
@@Sekarumn Pins are added with the Pin Tool in the 3D Toolbar. Freezing is done by selecting the pattern piece, right clicking and choose Freeze. The new mesh brush allows for selection of an area, then right click to freeze just that area.
Hi there! 59:10 the dart is closing in your 3D rendering. It looks like you are just clicking on "select" (or Q) but it does not work for me. The dart remain open and if I simulate, the piece is falling down. Thanks for your help :)
Thanks for the tutorials! I'm using 5.2 on my MacBook Pro, and I'm trying to use shortcut keys for functions, but it's not working. Copying and pasting patterns worked, but shortcut keys like A or Z don't work. I checked user settings, and they seem alright. Do you know how to fix this problem?
This can occur if your computer keyboard is switched between languages and not switched back. If the Keyboard in not in English sometimes the shortcuts don't work. You can check or re-set your shortcuts in Settings>User Settings>Shortcuts>2D Pattern>Edit . If you click in that area you can hit re-set or type in a shortcut.
How does she grab and move around her 2D screen? It looks similar to Photoshop where you hit the spacebar to move selections or to move around on your work space. It's driving me nuts having to zoom out and then zoom back in on different rectangles. I just want to be able to move the workspace and I'm sure there's a way to do it.
Hi Hari. There is no master list currently. But our online Support Manual. Does have articles for each tool which you can fine here - support.clo3d.com/hc/en-us/categories/115000064648-Manual
Thank you again on the minute 51 the left click and right click to get the menu for a certain distance moving does not work in Mac. Is there another way for Mac users? thank you very much
en el minuto 32:23 hace una bonita curva en su video ,,lo intento yo pero me sale una curva medio recta (digamos que es una curva que mide 2cm- y aparecen 3 lineas que hacen la curva y no sale redondeada...xfavor nesesito ayudaaaaaaaaa
Hi In CLO we usually remove the Interior Intake of a dart. Similar to how in CLO we do not visualize the seam allowance. This is to make sewing the patterns faster and easier
Hi Alex. Our Dart tool was updated after this video was made. The step you are asking about was added to allow users to true a dart if they wished to. We have a newer video that shows all of these new steps here th-cam.com/video/m4uUScYmY9Q/w-d-xo.html The dart portion starts at the 15:44 mark. :)
Hi there! Thank you so much for these great tutorials! I'm using 5.1 and when I try to do as 22:16 and holding D so that other curved points doesn't move, D does not work at all! Can you please tell me what's going wrong? Thank you so much!
22.21 - Doing the cut and/or cut and sew part. I drew two separate segment lines as you did within one pattern piece, after I selected the first segment line and cut it worked but my second segment line disappeared, any reason why this would happen? I was able to then draw another internal segment line and cut though.
When I am “offsetting as internal line” i cannot input a custom distance it only offers increments of 1” always ending in .197”. How can this be changed to custom numbers? I am unable to type into the box and the up and down arrows are the only inc/dec controls.
Hmmm... that's very odd. Off the top of my head I cannot say for sure what the issue might be. You should check a couple things; 1] make sure. you are using the latest version of CLO 2] update the OS of your computer 3] Check to make sure the settings for your mouse are correct in Settings Menu > User Settings > View Controls. If that doesn't help I would have a look here and if necessary create a new post. support.clo3d.com/hc/en-us
Right clicking while dragging on the "edit pattern" tool doesn't work. Has that feature been removed for this tool? It works with the polygon tool but not this one. I tried many times
@@CLO3D I am on a MAC. I can do a simultaneous right-click on every tool except on the 'edit pattern' and 'transform pattern' tools. I reset my user settings as well, didn't make a difference
What Version are you on for CLO? In user settings make sure you have the mouse set to either magic mouse or regular mouse (not user preset) If you continue to have issues please reach out directly through our websites Contact Us page
When I am holding and moving a point I want to move, I can’t click on right side of the mouse. For an old apple mouse it seems like one can only click one side at time, does anyone has the same problem? I can still open the moving distance windows by clicking on my trackpad, but it not as convenient as on a mouse, do I set something wrong?
Hello and thank you for this video. Please can you tell me how I can increase the size of the font in 2D window. The line length numbers are too small for me to read even with my glasses. I have to zoom in all the way to see one number. Please help!!
Hi. It is not possible to change the font size. I would recommend changing your resolution settings. on a PC this can be done within CLO. support.clo3d.com/hc/en-us/articles/360001547128-User-Interface On a Mac you must do this in your System Preferences for the whole computer.
Hello there:) First, congrats! you are doing a great job with these videos! Quick question...what's the difference between a point and a notch? when do you have to use one or the other? Thanks a lot and, please, keep making more videos!
Points are necessary for editing in the program while notches are usually added for marking areas that need to be matched together in sewing. Sometimes notches will mark a larger area that needs to be eased into a smaller area, and help someone sewing find these areas easily. Points will not show when a pattern is printed out (unless it's an obvious corner area), but notches will show a marking on a printed pattern anywhere along a line.
im not able to drag a point or segment with left side of Magic Mouse and then click right because the whole mouse is already pressed down for distance input?
Here is a forum post about Mac Navigation. If you go to Settings>User Settings>View Controls you will be able to see or customize your navigation control for your specific device. support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
hi, im following along and Hit SHIFT to try to select multiple lines with the "edit pattern" tool and for some reason it doesnt want to select multiple lines. do you know why is this happening? thank you,
I'm using 5.2 on MacBook Pro. In 9:30, my Edit Pattern Tool couldn't select multiple segments by holding Shift +left clicking. Is it about the user interface setting problem? Could you please tell me how to fix it?
So sorry for that but someone need to say that This kind of tutorial creation has a minimum requirements like calm and not noisy or harsh voice and correct recording equipment to not causing unbalance and low audio recording which the teacher does not possess or equip for sure and for another he/she should possess English as their native language to being comfortable to using it and also not having any pronunciation issues with it to making it hard to understand for audience.( As it is obvious for the same Native language reason she is talking on prerecorded video which cause unmatched tutorial between what she actually is doing and what she is explaining about it most of the time and from her accent I feel it like she is originally Asian). And lastly in general when you are creating a beginner tutorial series you have to aware about it you need to explain every single step you do without video editing, for understanding this issue you just need to pay attention to this comment section and see it almost 90 percent of people marked a specific time on video and asked how you did it on that specific time, this kind of issues comes directly from that kind of mistakes I mentioned.( also, usually no one would record an hour tutorial for beginner tools explanations and instead they will create multiple tutorial in a very short time for easy to use and access exactly like what we have in Zbrush as AskZbrush section or similar sections on other 3D software) For sure she is a very professional person in this software but being a teacher is a talent which needs some requirements, my suggestion is using someone like Arrimus 3D or Wes McDermott or someone like them who is proven to be a real teacher. Thank you!
If you are looking for newer videos we recommend looking into our series on Udemy. Which is designed for beginners and taught by one of our CLO instructors
If that one does not carry these issues I mentioned, I will be happy to even pay for it instead of free version on TH-cam because this one is completely useless specially with unbalance volume, I have to turn my volume up and down rapidly in the middle of each video sections.@@CLO3D
11:54 is there a way to do this manually, as in not by right clicking while holding the left mouse button, because that feels impossible to do on the trackpad.
Hello. currently this is how Precision Boxes are opened in CLO. For best workflows with CLO we do not recommend the use of a trackpad, but instead a 3 button mouse.
how did you create the curve in 23:42 I held down my left mouse click and it created more internal line points. If I don't hold the mouse button, the line goes linear. It doesn't curve.
A very inportant video, filled with information, thanks CLO!
This video was also incredibly dull. Even though CLO is interesting and fun, I could hardly keep awake through the drawling. CLO, if you ever remake this video, please do it a bit differently.
Glad you found the information important. We do actually have an updated version of our beginner course currently available on Udemy
www.udemy.com/user/clo3d-virtual-fashion/
Excellent! Finally a clear explanation of the tools. I am so excited to get started. I've had this program for over a year and I just learned more in an hour than in all that time!
Great to hear!
This is exactly what I need today! I’m trying to insert a godet to a skirt. Thanks for a very informative content !
Glad it was helpful!
how to hold down left click and simultaneously right click on a track pad? (used to transform pattern and edit moving distance in between 4:00 to 12:00)
You would have to adjust the settings in CLO as well as in the computer settings as well. Honestly, an inexpensive mouse will make your CLO experience a LOT easier.
This is what I exactly had, and still not finding a solution.
@@CLO3D That is what I exactly had, and I'm using an Apple Magic Mouse. What settings should I set? Thanks.
Thank you very much for this wonderful tutorial! :)
It's really helpful to beginner as like me.
Through this tutorial, I've much improved.
Glad it helped!
Thank you very much for these videos. One problem I am facing is that I am using Mac and I cannot do the instructions at minute 5:25: Left Click DRag and at the same time Right Click! this is impossible in Mac. can you guide me?
Hi Anoosheh. in CLO to open precision you will need to hold the Option Key and Left click (magic mouse). We have further information about this on our website
support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
@@CLO3D thank you for your response. But this is not working. In the video you mentioned, "as you are left clicking for resizing a shape, right-click simultaneously to get a transform box." But right click is impossible and the holding option also does not work. thank you for your help.
@@CLO3D You talk about it at minute 4:39
@@Anooshehk The Hold left click and Simultaneously click Right is only for a Regular 3 button Mouse.
What type of mouse are you using? Have you set up the proper type in your settings? In your Settings > User Settings > View Controls make sure that you are on the correct type of mouse - Drop down menu in the upper right corner.
We have a guide about this in our beginner series th-cam.com/video/0Oc-mtpQEk0/w-d-xo.html
Once you have the proper settings for your mouse you should then be able to follow the link to the mac guide I posted above. I will mention again if you are using a magic mouse it is slightly different opening a Precision Box then what the instructor is saying since they are using a 3button mouse. You must use Mac commands instead
@@CLO3D I am using Mac Book pro and using the square frame on my laptop the bottom of my keyboard and using my fingers for navigation. I do not have a separate mouse
Excellent Tutorials so far A++
Glad you think so! Thanks
Very helpful thank you, one note I'm unable to access the menus needed when you should right and left click together with a magic mouse, is there a work around?
Hi. You can find more specific information on our websites help center. here is an article about Mac Navigation
support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
Thanks so much you tech details.
Thank you Clo! in Minutes 22:21, holding down D and simultaneously holding Control does not work (I tried Command as well) can you help? thank you
Hi Anoosheh. Please read the Mac Guide. Here is the link again support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
Thank you :)
Hi! It’s 3 years later and the ‘curvature tool’ is now ‘fullness (point)’. I will look for another tutorial for the updated software tool, but if you could direct me to a tutorial or have any tips, I’m here! Thanks
Hi. There are both the Curvature tool and the Fullness tool in CLO. You may just have your tools set up to be hidden under other tools currently by grouping. Grouping tools can be turned off in the User Settings.
You can also find a newer CLO tutorial on Udemy. www.udemy.com/course/clo3d-basic-apparel-training-core-module/
That is the solution to my problem! After changing the User Settings, I now have the curvature tool. Thank you so much Clo!
47:41 this movement don`t work. I´m using clo5.1? I tried really hard but it don´t work?
Were you able to solve the issue based on what Michelle suggested?
Are there any Lessons for an apple mouse?
You can set up Magic Mouse in the User Settings.
@@CLO3D months and months late, and my user experience was so BAD it wasn't worth torturing myself, and i couldn't there for even recommend your program to other people
@@iancpowell Sorry.
Tip, don’t use an magic mouse
Could you provide directions for magic mouse users? We can't simultaneously left and right click.
Rather than Right Click, press Control on the keyboard.
What is the word which is mentioned at Time - 37:57 - 37:58? It goes like "This is totally fine" at 37:55, "The baseline is really kind of ........." at 37:57-37:58. I don't understand that word. Kindly type it in Reply for me to pick up the word and understand what is meant there.
Hi. You may find turn on CC (Closed Caption) helpful as it has all of the words which can be read
-The narrator says "null and void"
That's a good guidance to turn on CC. And anyways, thankyou for mentioning the word here@@CLO3D
Incredibly useful guide. Thank you!
You're very welcome!
I couldn't move the picking point in the 3d window as shown in 24:40. Did I miss anything from the previous basics or is it because of the version 6.2 I am using?
The picking point shows up when you select the pattern piece in the 3D window. In the video, she grabs the pattern and stops simulation. When she selects a new tool, the picking point disappears.
Got it. Thank you :)
15:00 I'm following along step by step and don't get the handles on the upper side, only the lower one. I'm on CLO 7.
If you use the Edit Curvature Tool to change the segment, when you then go back to the Edit Pattern Tool, you will have the Bezier Handles on that segment.
How on earth did we go from the curved internal offset lines 19:34 to the ones in 19:37
It was just an editing clip - good eye! Both were made the same exact way but you don't get an issue with very small offsets. So it was better to show how to handle version where a different result occurs that might need explaining.
CLO no worries, thats fair enough :)
what did you do on 24:37 after the cut option, so your fabric can be moved/pinched without falling down to the ground?
IF you have not arranged and sewn the patterns around the avatar you can add pins so they do not fall and you can still affect them while simulating. You can Freeze or Deactivate the patterns not being edited and they will stay in place.
@@CLO3D thankyou, how to add pins/freezing it?
@@Sekarumn Pins are added with the Pin Tool in the 3D Toolbar. Freezing is done by selecting the pattern piece, right clicking and choose Freeze.
The new mesh brush allows for selection of an area, then right click to freeze just that area.
@@CLO3D Thank you, thank you so much for the explanation, I just found it as your saidd
@@Sekarumn Awesome!
Hi there! 59:10 the dart is closing in your 3D rendering. It looks like you are just clicking on "select" (or Q) but it does not work for me. The dart remain open and if I simulate, the piece is falling down. Thanks for your help :)
You can sew the dart closed manually with the segment sewing tool if it did not automatically sew closed. Hopefully that helps you continue working :)
Thanks for the tutorials! I'm using 5.2 on my MacBook Pro, and I'm trying to use shortcut keys for functions, but it's not working. Copying and pasting patterns worked, but shortcut keys like A or Z don't work. I checked user settings, and they seem alright. Do you know how to fix this problem?
This can occur if your computer keyboard is switched between languages and not switched back. If the Keyboard in not in English sometimes the shortcuts don't work. You can check or re-set your shortcuts in Settings>User Settings>Shortcuts>2D Pattern>Edit . If you click in that area you can hit re-set or type in a shortcut.
How does she grab and move around her 2D screen? It looks similar to Photoshop where you hit the spacebar to move selections or to move around on your work space. It's driving me nuts having to zoom out and then zoom back in on different rectangles. I just want to be able to move the workspace and I'm sure there's a way to do it.
She is working on a PC with a regular mouse that has a middle scroll wheel/button. Are you on a PC or a Mac?
Best lesson so far, thank you!
Is there an overview or chart of all tools with their functions?
Hi Hari. There is no master list currently. But our online Support Manual. Does have articles for each tool which you can fine here - support.clo3d.com/hc/en-us/categories/115000064648-Manual
Thank you again on the minute 51 the left click and right click to get the menu for a certain distance moving does not work in Mac. Is there another way for Mac users? thank you very much
Please see my reply to your other comment :)
Hi, in 59:07 how do you simulate without having any of the patterns to fall down to the floor?
If you turn simulation on and then back off very quickly you can stop it before the patterns completely fall to the ground
en el minuto 32:23 hace una bonita curva en su video ,,lo intento yo pero me sale una curva medio recta (digamos que es una curva que mide 2cm- y aparecen 3 lineas que hacen la curva y no sale redondeada...xfavor nesesito ayudaaaaaaaaa
Lo siento por la respuesta tardía. ¿Pudiste resolver tu problema?
Dart is something that's folded and stitched to provide fit to the garment. Buy why is it shown as a split in the pattern as seen in the video ?
Hi In CLO we usually remove the Interior Intake of a dart. Similar to how in CLO we do not visualize the seam allowance. This is to make sewing the patterns faster and easier
Ok@@CLO3D
Can we slash and spread a curved internal line?
That is not possible. You would have to Cut it and add back in a pattern piece to fill the "slash"
Why when i add the dart the patterd doesnt cut but it creates a funny curve on the outer line?
Hi Alex. Our Dart tool was updated after this video was made. The step you are asking about was added to allow users to true a dart if they wished to. We have a newer video that shows all of these new steps here
th-cam.com/video/m4uUScYmY9Q/w-d-xo.html
The dart portion starts at the 15:44 mark. :)
Hi there! Thank you so much for these great tutorials!
I'm using 5.1 and when I try to do as 22:16 and holding D so that other curved points doesn't move, D does not work at all! Can you please tell me what's going wrong?
Thank you so much!
Idk man, I'm using 5.1 as well and it does work fine. Literally select a point and keep holding D while you are moving the point.
Sorry for the late response. Were you able to find the information you needed?
I had this issue too. You cannot set any shortcut to the letter D or this will not work
@@CLO3D Please not to the developers, the D shortcut will not work if you set any chortcut key to use the letter d,
@@orbis6360 Unsure what this comment is about. I would search or post in our forums. support.clo3d.com/hc/en-us
22.21 - Doing the cut and/or cut and sew part. I drew two separate segment lines as you did within one pattern piece, after I selected the first segment line and cut it worked but my second segment line disappeared, any reason why this would happen? I was able to then draw another internal segment line and cut though.
Sorry for the late reply. Were you able to solve your issue?
When I am “offsetting as internal line” i cannot input a custom distance it only offers increments of 1” always ending in .197”. How can this be changed to custom numbers? I am unable to type into the box and the up and down arrows are the only inc/dec controls.
Hmmm... that's very odd. Off the top of my head I cannot say for sure what the issue might be. You should check a couple things; 1] make sure. you are using the latest version of CLO 2] update the OS of your computer 3] Check to make sure the settings for your mouse are correct in Settings Menu > User Settings > View Controls. If that doesn't help I would have a look here and if necessary create a new post. support.clo3d.com/hc/en-us
How to create reuleaux /curvilinear triangle with identical curved sides (going from an equilateral straight lined triangle polygon)?
Mirror Creation? support.clo3d.com/hc/en-us/articles/115000511208-Polygon
Right clicking while dragging on the "edit pattern" tool doesn't work. Has that feature been removed for this tool? It works with the polygon tool but not this one. I tried many times
it also doesn't work for the transform tool.
It should still work. What version of CLO are you on and are you using a PC or MAC?
Have you double checked that your mouse setting are correct?
@@CLO3D I am on a MAC. I can do a simultaneous right-click on every tool except on the 'edit pattern' and 'transform pattern' tools. I reset my user settings as well, didn't make a difference
What Version are you on for CLO?
In user settings make sure you have the mouse set to either magic mouse or regular mouse (not user preset)
If you continue to have issues please reach out directly through our websites Contact Us page
@@CLO3D I'm on version 2024.1.112 and I checked several times on my settings to make sure magic mouse is selected. There are no issues with that.
Thanks for the tutorial! It's very clear and I def had learned a lot from them
It is in the 2D Toolbar OR the 2D Menu--> create--> Notch.
When I am holding and moving a point I want to move, I can’t click on right side of the mouse. For an old apple mouse it seems like one can only click one side at time, does anyone has the same problem? I can still open the moving distance windows by clicking on my trackpad, but it not as convenient as on a mouse, do I set something wrong?
Switching to just a regular 3 button mouse will solve this issue.
Hello and thank you for this video. Please can you tell me how I can increase the size of the font in 2D window. The line length numbers are too small for me to read even with my glasses. I have to zoom in all the way to see one number. Please help!!
Hi. It is not possible to change the font size. I would recommend changing your resolution settings. on a PC this can be done within CLO. support.clo3d.com/hc/en-us/articles/360001547128-User-Interface
On a Mac you must do this in your System Preferences for the whole computer.
how do you zoom in and zoom out?
CLO functions easily when you use a 3 button mouse. support.clo3d.com/hc/en-us/articles/115002673588-Set-View-Control
Hello there:) First, congrats! you are doing a great job with these videos!
Quick question...what's the difference between a point and a notch? when do you have to use one or the other?
Thanks a lot and, please, keep making more videos!
Points are necessary for editing in the program while notches are usually added for marking areas that need to be matched together in sewing. Sometimes notches will mark a larger area that needs to be eased into a smaller area, and help someone sewing find these areas easily. Points will not show when a pattern is printed out (unless it's an obvious corner area), but notches will show a marking on a printed pattern anywhere along a line.
i guess it is quite off topic but do anyone know a good website to watch new series online ?
@Aiden Matthias Flixportal xD
@Dustin Demetrius Thanks, signed up and it seems like a nice service =) I really appreciate it!!
@Aiden Matthias glad I could help :D
im not able to drag a point or segment with left side of Magic Mouse and then click right because the whole mouse is already pressed down for distance input?
Here is a forum post about Mac Navigation. If you go to Settings>User Settings>View Controls you will be able to see or customize your navigation control for your specific device.
support.clo3d.com/hc/en-us/community/posts/360000825988-Mac-Navigation
I found that you have to press Ctrl while holding down the left mouse button for the panel to appear
hi, im following along and Hit SHIFT to try to select multiple lines with the "edit pattern" tool and for some reason it doesnt want to select multiple lines. do you know why is this happening?
thank you,
I'm struggling with this as well. did you mange to fix it? @jarroyomaranata
I found out how to do it. you hold shift and cmd then select the lines you want. well that's how it works on my MacBook Pro!
Sorry for the late response. Were you able to find the information you needed?
thank you so much!!
I'm using 5.2 on MacBook Pro. In 9:30, my Edit Pattern Tool couldn't select multiple segments by holding Shift +left clicking. Is it about the user interface setting problem? Could you please tell me how to fix it?
Sorry for the late reply. Were you able to get an answer to your question?
Yes Thanks for the tuto !! :)
Happy to help!
thank you)
Welcome!
merci de nous faire des vidéo en français
De rien
Allow me to support Arabic language translation.
So sorry for that but someone need to say that This kind of tutorial creation has a minimum requirements like calm and not noisy or harsh voice and correct recording equipment to not causing unbalance and low audio recording which the teacher does not possess or equip for sure and for another he/she should possess English as their native language to being comfortable to using it and also not having any pronunciation issues with it to making it hard to understand for audience.( As it is obvious for the same Native language reason she is talking on prerecorded video which cause unmatched tutorial between what she actually is doing and what she is explaining about it most of the time and from her accent I feel it like she is originally Asian).
And lastly in general when you are creating a beginner tutorial series you have to aware about it you need to explain every single step you do without video editing, for understanding this issue you just need to pay attention to this comment section and see it almost 90 percent of people marked a specific time on video and asked how you did it on that specific time, this kind of issues comes directly from that kind of mistakes I mentioned.( also, usually no one would record an hour tutorial for beginner tools explanations and instead they will create multiple tutorial in a very short time for easy to use and access exactly like what we have in Zbrush as AskZbrush section or similar sections on other 3D software)
For sure she is a very professional person in this software but being a teacher is a talent which needs some requirements, my suggestion is using someone like Arrimus 3D or Wes McDermott or someone like them who is proven to be a real teacher.
Thank you!
If you are looking for newer videos we recommend looking into our series on Udemy. Which is designed for beginners and taught by one of our CLO instructors
If that one does not carry these issues I mentioned, I will be happy to even pay for it instead of free version on TH-cam because this one is completely useless specially with unbalance volume, I have to turn my volume up and down rapidly in the middle of each video sections.@@CLO3D
Also, I will appreciate it if you provide me a direct link to it!@@CLO3D
Hi
We need clo software
@@mdshahinmia1066 Hello. please contact us through this page www.clo3d.com/business/business_solution
11:54 is there a way to do this manually, as in not by right clicking while holding the left mouse button, because that feels impossible to do on the trackpad.
Hello. currently this is how Precision Boxes are opened in CLO. For best workflows with CLO we do not recommend the use of a trackpad, but instead a 3 button mouse.
how did you create the curve in 23:42 I held down my left mouse click and it created more internal line points. If I don't hold the mouse button, the line goes linear. It doesn't curve.
When you click, hold down the CTRL [pc] or CMD [Mac]