Electrical Wiring For Lights (House Wiring Made Easier)
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Access The Domestic Single Phase Wiring Course Here. 👉topheightselec...
An Electrician must understand Electrical Wiring basics such as the Wire Size, Earthing, Electricity Circuits especially for House Wiring, How To Check Earthing, How a Switch Works, from the Electricity Meter all the way to the Consumer Unit. He must understand the difference between Ground and Earthing.
Wiring a house for a lighting system is very easy. Three key wires required are a phase, a neutral and an earthing connection. The standard cable size being 1.5mm
The wires are connected at the consumer unit to the junction box where a light source will be placed.
Two wires will be fed to the switch. These are mainly for completing the circuit for the light.
The earth connection is a very important in this installation. The wire should be of the required size and connect the consumer unit to the meter box and the ground through the earth rod.This makes the earthing connection.
A perfect earth connection starts in a home electrical or electronic appliance. It goes all the way to the socket and to the consumer unit and to the meter board and finally to the ground.
Other important earthing features of earthing outside a meter box or the domestic wiring is at the PME, the potential multiple earthing found at the immediate utility pole and the earthing at the transformer supplying electricity to our homes.
In any electrical installation, safety comes first. Always use the correct safety gear and the right tools to avoid any electrical hazards.
Adhere to electrical codes in your country such as color codes and safety procedures.
Subscribe to my channel for more of these electrical tips.
#wiring #electrical #electricity #housewiring #electricalengineering #diy #howto #education #video
am usually very dump! but, following your lesson, I find myself wired almost proper. A great teacher here
This is awesome bro, 👏🏾👏🏾from Cape Town
Thanks, I appreciate it. Cape Town is a great city!
Good Good explanation. You are such a good teacher who really explains well.Nimesoma sana na your lessons. May God bless you .
Sir this video is very important for us
You are doing exceptional work bro! I like the way you are meticulously procedural. Keep up the good work. I
U are really the best electrician !
Am stephen from Uganda thanks very much am enjoying the class as well as gaining experience
Very very helpful Your tutorial ❤
Thanks Azan🙏
Outstanding teaching...... switch connection awaited
You are a veery good teacher
I have a question.....about the first and second holes,the live wire has just passed through,how do we connect to the switches? Do we cut the supply wire to connect the socket wire? or we just need to strip off the part needed for connection? Or do we use connectors?
Thanks for watching! Let’s light up the world!
Thanks. A clear and concise tutorial.👍
I understand your teaching , bless you
keep up the great work! Really educative. Following up
Thank you so much, I sure will.
Thank you waiting for the connection of the switches
Thanks for your feedback Derrick. I already did it you might want to check it out here:
th-cam.com/video/WkAkbhr2mf8/w-d-xo.htmlsi=YZZMFNXMgmjPg1yc
Practical for a grade 3 student who is pursuing electrical engineering kindly
From Ghana
I am learning alot,👏 keep up
It's an honor to have you stop by to learn and give me a feedbackAkoto! Thanks☺
Thanks brother for explaining i would like to be an electrician so I will start level 1 at the college next year you can suggest me about it
Thanks bro😊
Work is well done ✅ thanks
Your good teacher
Is it wrong to connect my light from the socket which has 2.5mm cables and how safe is my bulb if I don't connect the earth wire
It is good to take supply from the consumer unit. Per my perspective I would rather you use 1.5mm cable for lighting system. Please reach out for a pro for more information as I’m also a beginner ❤
I see can't cause problem
Can you teach me more personally
Hello sir,, good afternoon. I have question concerning the outlet voltage. How can I change my outlet voltage from 220v to 110v from the consumer panel
Not proven personally, but a transformer could work
Thx bro😊🎉
Good day please show me how to connect those 3 switches from which one take the power and the other takes power to
I think you left out some information Earnest which I think I will need to execute your request.
Thanks for the update
You are welcome Kelly.
Now I'm really misunderstanding the earth and neutral strait to the bulb
Educative bro 🙏
Thank you Willy.
Thankyou Teacher 🙏
Good explanation
Sir I will like a video from a real house
Nice one
Thanks 🔥
But sir am little bit confused why are you putting earth wire in lighting
Eath wire is put bcoz some lights have polarity so they must be earthed
Hello John how are you doing
I have question for you
Like single phase
My question is that is it possible to connect earth from neutral bar to the earth bar if the drop cable does not have earth wire and you don't have earth ground installation
Wow.... You are amazing
Pls sir I want to apply for top height electrical teaching
How do I apply
cool ... very helpful
Thanks Stanley for your feedback.
So keep it up!
Awesome thanks sir
Thanks too Phylis
Pleaywhy is it that the neutral wire burns wen electric current is open
Thanks bro
Hello Musa, i have z earthleakage that burnt i want to ask can 16mm conductor burn the earthleakage or is it something else??
Hello Cheezboy, I believe your neutral was lose and the earth wire bonded to it acted as a return path for a load it couldn't handle.
I'm John though😊
what if one does not have a drawing wire/?
Use blue or white as a returner
Thank you Elifas, I am well guided.
Please help me understand a simple generator wiring, I am a electrician
Plz sir finish to connect the switches so that we can hav full information
Sure thing Malama!
Good morning,please where did you come from please 1:32
Does light use earth?
Yes please
We don't really use earth in lighting wiring in Nigeria, for homes not industrial
You meant we connect neutral and earthing to the light source ama
Great
Drew the layout drawing circuit
Great teacher. I am enjoying myself learning. Please John send me your contacts
Rather use a blue colored wire to the bulb so u don't get confused or mark it....
Respect +
Smart
Who de learn work newly no suppose come across your video 😂 bro you de ment?
In switch u don't include earthing
😂who told you...Kama ulienda gumbaru watu walienda group of schools😂😂😂ata neutral unaenda kwa switch itadepend na purpose of the installation😂😂😂pole lakini
I am an electrician please teach me
Hello Brandon, check out my single phase domestic wiring.
Why birds are not usually shocked after standing on an electric wire
Great question Kalalo. I will do a video on this
WOW
Thanks😊
You meNt
okasy
U LACK SAFETY GOLVES
Man I need your whatsap number. I am learning alot . I am from Gambia
Thanks for your feedback Modou🙏🏽
This is my contact +254 711 343 412