TrP INDEV SWITCHES GUIDE (WATCH ALL THE WAY THROUGH)

[@deahtstullhd20]

thanks! i knew u could control it but i never really understaded it and this video is easy to learn. Now i can drive proplerly what makes me happy

[@human962]

Thanks even tho I know how it works this also explained the other types like crossings.

[@Turtlesvr26]

I did not get the buss to start for like 30 mins.then I got it but I did not get out of spawn till like 2.5 hours in and if this vid did not exist I probably would not get out lol

[@gheorghemalic8414]

0:50 at this sswitch u need to turn off circuit control only if your comperssor in on but if it isnt u can follow normal switches rules

[@huetran-1486]

Why I am Drive bus why go left? :( can I help?

[@yesnukesshouldbelegalised]

instructions unclear, i go 10km yet the cable still disconnects

[@SNBRdude]

Have you checked the condition of the pole head inserts

[@yesnukesshouldbelegalised]

@@SNBRdude what about them

[@Nahverkehr_Nurnberg]

You have to enable the pole with the pole head wrench, just press leftclick on the poles with it

[@boomaglev7859]

@@yesnukesshouldbelegalised The pole heads are the chances of your poles going off of electrification, there are new head inserts in the toolbox that you can add to the poles to decrease the chances of a random pole failure.

[@АлексейКиприянов-е3г]

Короче, как правило, под током(т.е с зажатой педалью газа) - стрелка в положении «налево». Если же проезжать стрелку в выбеге(т.е не нажимая педали газа) - стрелка примет положение «направо». Это действительно так, причем не только у троллейбуса, но и у трамвая тоже.

[@ER2T-7212]

у трамвая для этого есть тумблер) как у мегаполиса. И тут есть небольшая путаница. под током стрелка принимает иное положение, а на выбеге остаётся в исходном - направо.

[@swissreactions1]

THANK YOU SO MUCH

[@PrichinaTryaskii]

Hello, please can you help me?
I turned on in setting the "show route navigation" but it's not showing it :(

[@quincymaige4335]

i did it but anyways how are you good at driving whit out crashing the poles ? i crhas a lot of time and i am trash😥

[@FelineFreaksQuest]

the problem of disabling it, it will stop your bus from accelerating

[@JGamer_007]

Thanks for instructions, i'll porve it Now

[@nezdol]

man thank you i didnt understand the switches but the tutorial is clean and simple now i watch it i understand the switches

[@TSgotstolengoddamm]

Glad it helped

[@kraəb]

@@TSgotstolengoddamm great vid wirtualized

[@matasmorkunas5531]

Its like i know how to use the switches but when i watched this vid it feels like i forgot about em

[@LeSansMicro]

Hello! Nice video but how do you do on controller to be able to turn left or right without derailing?

[@Goldpoo227]

Question, does mobile have headlights?

[@isib4428]

How do I get permission to write stuff in the Discord server?

[@Mr.coolplanes132]

thx

[@FrankSerrander]

then how thef do you do so with a gamepass trolley bus?

[@CasualDeveloper]

my controller stage 15 and stage 17 light keep lighting up when i press the throttle and my bus wont move

[@reenasingh5628]

Ty now my wire doesn't go any where else 😊

[@TheNamesREID]

Are there updated speeds? I've gona much faster (like 20 through the merge) and been fine...

[@filipoholz]

Why would you turn off the control circuit? Just dont accelerate

[@th0mas_cz]

Yep, that's right. Now you have to actually press e to go right.

[@StrongestCheetoRBLX]

can u make a mobile vid or demo

[@d0g3br34d]

thank you, these switches are so weird and disconnects me so much

[@Norwegian_Train]

Idk how to turn left on the pole

[@th0mas_cz]

You had to accelerate, now you don't need to.
To go right, disable control circuit (or how it is called) by pressing it or pressing e.

[@Sh4dowKuroo]

There's like this one switch one line 10 that when I click e it still goes left

[@ILikeUktrains]

WhT about ZUI 10

[@PrinceZyyan7745]

So thats why is always go to the wrong way thx your the best

[@Atexko]

at the spliters i cant go to left if i do anything ill go to right help me

[@Anshgaming20274]

Bro how to go left bcz when I have to go left then it's automatically switch to right without any control circuit 😢

[@TSgotstolengoddamm]

hold w

[@SUSXDaisy]

how to do on mobile

[@arnasmiliauskas7645]

But is you want switch to left you need to do same?

[@RblxHorror-vh7ft]

this video really helped me! I Didn't know hot to switch the control switch! Thank's a lot

[@tainasroblox-adventure]

Thanx for helpful video!

[@nikolainikolaev3435]

Tanks 😂

[@Gabrielmaragh228]

1:36 BOO

[@project_20xx]

I thought you had to press q to turn left

[@Gabrielmaragh228]

Thx

[@ld00001]

Thanks! Are u from the USA 🇺🇸?

[@TSgotstolengoddamm]

yes why?

[@testensford4403]

What does the -%100 mean?

[@BrokenIET]

For going left all I do is cut the power and it goes through fine, no need to turn off the control circuit.

[@avgeek_d00d86]

Isn't turning the power off completly more complex then just the control circuit?

[@BrokenIET]

@@avgeek_d00d86 I meant I stop accelerating, sorry my comment didn’t make that clear I‘m not great at writing lol

[@avgeek_d00d86]

@@BrokenIET no problem

[@balintbiro1478]

TS do you know why the right or left side pole broken when I drive?
Can you help me please? :)

[@TeimonKauppa739]

Worn out pole head insert

[@Pomeranc470]

You need to change pole head inserts if it has for example under 50%

[@balintbiro1478]

@@Pomeranc470 Oh? Thank you so much!

[@boomaglev7859]

the amount of contents you have in the toolbox are not useless, there are head inserts that you can use to replace the heads so your poles dont fall off of electrification.

[@ReeEmbrio]

how do you do the breaking at 100%

[@SupersonicAviation]

F

[@seagull4962]

how do you open the doors without clicking on the button

[@Tim456]

use the numbers on ur keyboard so like if u press one it it will open ur first door press 2 and it will open ur second door

[@MARKOTM]

1,2,3,4,5 and 0 opens all door

[@dinonugget2306]

uh can someone tell me all of the controls?...

[@charles_thesecond]

check their discord, you can find a link at a tutorial vid that they made

[@dinonugget2306]

@@charles_thesecond thanks

[@mhd_fan_luki]

How did you zoom?

[@MARKOTM]

m

[@viktoruzunov690]

What to do when you stop on switch 😜

[@TSgotstolengoddamm]

either rewire or restart

[@nah3507]

you dont need to press e to go right the route you chose do it auto for you

[@_jojo_joestar_]

yea but most of the time the poles actually switch to both sides so better to disable the circuit

[@kraəb]

what you just said is complete misinformation

[@nah3507]

​@@kraəb it real the dev make a update about this he said now if you have route navigation enabled, lines of route you set up will appear in between wires with your route number that will direct you where to turn and on which side of the switch you should go

[@nah3507]

@@_jojo_joestar_ it real the dev make a update about this he said now if you have route navigation enabled, lines of route you set up will appear in between wires with your route number that will direct you where to turn and on which side of the switch you should go

[@kraəb]

@@nah3507 you dont understand, it shows where you should go, not switching for you, or else it would be unrealistic

[@vehicleboi5598]

thank you so much 🚋

[@TSgotstolengoddamm]

No problem

[@dominicarceo9637]

You are a pro driver despite you are a Bacon Hair.

[@josislost]

oh so if he’s was a bacon you would assume hes a noob or a bad player?

[@dominicarceo9637]

@@josislost No, but most bacon hairs are dumb and follow you around.

[@ER2T-7212]

in real life max speed on switches is 25-30 but i tried at 40. I am ex. Trolleybus driver from moscow

[@The_Untitled]

How realistic would you say the game is?

[@ER2T-7212]

@@The_Untitled 9 out of 10. Real ZiU-9 (ZiU-682) almost always drive in poor condition :))) In the game, they are in perfect, factory condition. in reality, the state of the contact network (wires) is always different. In some places you can drive swich even 40 km/h, and somewhere it is dangerous even at 5 km/h